Coolant hose clamps

[Insert_Text_Here]

Ever since the new update I am unable to put coolant hose clamps back onto the coolant hose. Any help would be appreciated. I attempted taking a job, removing those, and immediately putting them back on. I could remove them, but could not reapply them.

[Mr. Noodles]

Im having this issue as well

Edit. Usually can put all but one back on

[Mr. Noodles]

Sorry for double posting. But I found a click spot for it. IF its the upper clamp going into the radiator. Look level at it right next to the tire and you should get one.

[Insert_Text_Here]

I can get the radiator hose clamps back on this is specifically the coolant hose, the one on the driver side of the engine block that goes around the back side.
Edit: The one with the smaller clamps

[badfluffy]

Glad to see it's not me. It seems to happen only on the Exocet.
I just spent 2 hours on a job and I'm going to get 50% completion because of a damn clamp... ugh

[badfluffy]

Originally posted by Mr. Noodles:

Sorry for double posting. But I found a click spot for it. IF its the upper clamp going into the radiator. Look level at it right next to the tire and you should get one.

This merits a double post! Found it! Thanks for the tip. It's pretty insane to have to resort to coordinates placement to get a clamp on but it works.

[Insert_Text_Here]

Originally posted by badfluffy:

Originally posted by Mr. Noodles:

Sorry for double posting. But I found a click spot for it. IF its the upper clamp going into the radiator. Look level at it right next to the tire and you should get one.

This merits a double post! Found it! Thanks for the tip. It's pretty insane to have to resort to coordinates placement to get a clamp on but it works.

Are you able to get the lower coolant hose on? That's the one I'm having issues with, the smaller one that wraps around the driver side. This is on the Catfish too, havent tried the Exocet since the recent update when this seemed to break for me. X,Y, and Z coordinates would be much appreciated lol

[badfluffy]

Originally posted by Insert_Text_Here:

Are you able to get the lower coolant hose on? That's the one I'm having issues with, the smaller one that wraps around the driver side. This is on the Catfish too, havent tried the Exocet since the recent update when this seemed to break for me. X,Y, and Z coordinates would be much appreciated lol

There are two clamps on this one. Which one are you having trouble with?
Also have you tried the auto-wrench? I can't remember the shortcut because I remapped my keys but if you look at your settings you should have a key for "Autowrench"

If you hold the auto-wrench key while double clicking on a part, it'll fasten itself.
It works with clamps too but not every time. You need to click the clamps to close them but the clamps get on by themselves.

[Nanamil]

Originally posted by Mr. Noodles:

Sorry for double posting. But I found a click spot for it. IF its the upper clamp going into the radiator. Look level at it right next to the tire and you should get one.

Thank you

[AsianButSax]

Originally posted by Insert_Text_Here:

I can get the radiator hose clamps back on this is specifically the coolant hose, the one on the driver side of the engine block that goes around the back side.
Edit: The one with the smaller clamps

If it is the coolant hard hose one you have to be on the passenger side looking over the motor to get it on.