Valheim

Valheim

Aimee 10. feb. 2024 kl. 13:00
Reduce/remove weather effect Fog
Is there a way to remove or reduce the frequency of fog in a singleplayer game?
Dev commands dont seem to work, I read somewhere it works in servers only.
Oprindeligt skrevet af Icy:
I have used Env Clear quite frequent it works fine in Local games.

You did not say whether you used F5 or not.
You have to hit F5 to open Console Window first, not in Chat Window.
Make sure when you type "devcommands" that it shows "True" so it is enabled then type "Env Clear"

Never fail for me.

I have always go by this
devcommands
debugmode
Env Clear

Good luck!
< >
Viser 1-13 af 13 kommentarer
Everlasting 10. feb. 2024 kl. 14:35 
Devcommands do work yes. Command "env clear"
Everlasting 10. feb. 2024 kl. 14:40 
If you have not activated -console this must be done before you launch the game.

If you have not, this is how you do it;

Open Steam. Go to your library and right-click on “Valheim”. Click on “Properties” and select “General”. You will see “Startup options”. Type - console and start Valheim. The [F5] key opens the Console when you're ingame, which you can use to enter admin and server commands. Press [Enter] to execute commands. Enter the command "env clear" and the fog will vanish.

For full list of commands, Google is your friend 😊
Humpenstilzchen 10. feb. 2024 kl. 15:22 
Oprindeligt skrevet af Ryder:
Devcommands do work yes. Command "env clear"
That´s exactly what I was looking for as well . Thank you :steamthumbsup:
Aimee 10. feb. 2024 kl. 16:04 
Oprindeligt skrevet af Ryder:
Devcommands do work yes. Command "env clear"
I did exactly this, and the console told me its not a valid command.
I even tried the autocomplete suggestions from the command box, and those did not work either.
Humpenstilzchen 10. feb. 2024 kl. 16:05 
Oprindeligt skrevet af Ryder:
If you have not activated -console this must be done before you launch the game.

If you have not, this is how you do it;

Open Steam. Go to your library and right-click on “Valheim”. Click on “Properties” and select “General”. You will see “Startup options”. Type - console and start Valheim. The [F5] key opens the Console when you're ingame, which you can use to enter admin and server commands. Press [Enter] to execute commands. Enter the command "env clear" and the fog will vanish.

For full list of commands, Google is your friend 😊
Hm odd, so I tried this command and the game told me that this is not a registered command. Couldn´t find it by using google either.
Forfatteren af denne tråd har angivet, at dette indlæg besvarer det oprindelige emne.
Icy 10. feb. 2024 kl. 16:10 
I have used Env Clear quite frequent it works fine in Local games.

You did not say whether you used F5 or not.
You have to hit F5 to open Console Window first, not in Chat Window.
Make sure when you type "devcommands" that it shows "True" so it is enabled then type "Env Clear"

Never fail for me.

I have always go by this
devcommands
debugmode
Env Clear

Good luck!
Humpenstilzchen 10. feb. 2024 kl. 16:25 
Oprindeligt skrevet af Icy:
I have used Env Clear quite frequent it works fine in Local games.

You did not say whether you used F5 or not.
You have to hit F5 to open Console Window first, not in Chat Window.
Make sure when you type "devcommands" that it shows "True" so it is enabled then type "Env Clear"

Never fail for me.

I have always go by this
devcommands
debugmode
Env Clear

Good luck!
Thanks for clarification. I used F5 though didn´t type devcommands nor debugmode. Will try again.
Aimee 10. feb. 2024 kl. 16:41 
Oprindeligt skrevet af Icy:
I have always go by this
devcommands
debugmode
Env Clear

Good luck!
Thank you, this works.
I did not know you had to activate devcommands while the dev console is already up.
Do commands work without debugmode? (so Devcommands > Env Clear... )
Everlasting 10. feb. 2024 kl. 16:47 
Tested it on my dedicated server and it works wonders there aswell :)

As long as -console is enabled, just follow what Icy so nicely explained.

"Devcommands" - enter

"Debugmode" - enter

"Env clear" - enter

Other commands that are used frequently for some when devcommands and debugmode are enabled is;

"God" - enter (makes you unkillable)
"Ghost" - enter (invisible)
"Tod 0.5" - enter (sets time of the day. 0 and 1 are both midnight. 0.5 is noon. So anything between can be used.

"Z" toggles flying on and off, "b" for no-cost crafing and building.

I could go on forever but Google is still a good friend for those who wanna explore the world of devcommands ❤
Sidst redigeret af Everlasting; 10. feb. 2024 kl. 16:55
Everlasting 10. feb. 2024 kl. 16:48 
Oprindeligt skrevet af Aimee:
Oprindeligt skrevet af Icy:
I have always go by this
devcommands
debugmode
Env Clear

Good luck!
Thank you, this works.
I did not know you had to activate devcommands while the dev console is already up.
Do commands work without debugmode? (so Devcommands > Env Clear... )
No, you will need to put in "Debugmode"
Vyndrika 10. feb. 2024 kl. 18:08 
For anyone having problems using it, remember to put the -console in the correct place. If you're getting a popup saying it's invalid then add a space just before the -console text. In game when you use the devcommands and env clear use it without the quotes. Here's the link to the Developer Console[valheim.fandom.com] page for better details (click on the "Show commands" under the Cheat Commands section).

Oh also remember that if you use env clear that it'll lower the chance of sea serpents if you happen to be hunting them since they spawn more in storms and making the environment clear means no storms. If later you want to put the weather back to normal type in resetenv.
Sidst redigeret af Vyndrika; 10. feb. 2024 kl. 18:14
avatar.zero 10. feb. 2024 kl. 20:21 
Oprindeligt skrevet af Aimee:
Oprindeligt skrevet af Icy:
I have always go by this
devcommands
debugmode
Env Clear

Good luck!
Thank you, this works.
I did not know you had to activate devcommands while the dev console is already up.
Do commands work without debugmode? (so Devcommands > Env Clear... )

Devcommands > Env Clear will work.

Devcommands is for turning on/off access to advanced commands. Debugmode is just for turning on/off certain single-key power-commands in regular play ('z' to fly, 'b' for no-cost mode, 'k' to kill all, 'l' to get rid of all nearby drops) and requires devcommands to be on.
Aimee 11. feb. 2024 kl. 5:58 
Oprindeligt skrevet af avatar.zero:
Oprindeligt skrevet af Aimee:
Thank you, this works.
I did not know you had to activate devcommands while the dev console is already up.
Do commands work without debugmode? (so Devcommands > Env Clear... )

Devcommands > Env Clear will work.

Devcommands is for turning on/off access to advanced commands. Debugmode is just for turning on/off certain single-key power-commands in regular play ('z' to fly, 'b' for no-cost mode, 'k' to kill all, 'l' to get rid of all nearby drops) and requires devcommands to be on.
Thank you this is the info I needed.
Will only be using Devcommands from now on, I dont want to ''cheat'' without needing to, and I certainly dont want to accidentally hit a button that activates one of those features :P
< >
Viser 1-13 af 13 kommentarer
Per side: 1530 50

Dato opslået: 10. feb. 2024 kl. 13:00
Indlæg: 13