Official RE2 Troubleshooting & Issue Reporting Thread

[Capcom Customer Service]

"If you see one of those things—uniform or not—you do not hesitate. You take it out...or you run. Got it!?" - Marvin Branagh, Resident Evil 2

We hope you’re all enjoying or will be enjoying Resident Evil 2 / BIOHAZARD RE:2 shortly! While we hope all of our fans will have a great time with the game, there will always be some cases here and there where the game may not function correctly under certain environments and / or hardware combinations.

We’ve set up this troubleshooting and feedback thread for you all to share any technical issues you may be having with the game.

Before providing any reports, please ensure you've followed the steps below to rule out problems with your PC, Steam, or the game’s files:

Troubleshooting Guide

1. Check the game’s system requirements

Please make sure you meet the minimum requirements for the game, outlined on the bottom of the game’s Steam Store page; if you do not meet the minimum requirements for the game, this may result in poor framerate, or the game not running.

If you do meet the minimum specifications but not the recommended specifications, you may want to try turning down the graphics settings, if you haven't already. Please note that most graphical settings changes require the game to be restarted in order for the changes to take effect.

Some high end integrated graphics chips and modern laptop integrated GPUs may work, but have not been tested, nor are they officially supported by Capcom. If you’re using a laptop with a dual GPU dedicated graphics card and integrated graphics processor, we recommend disabling your integrated graphics via the BIOS settings prior to launching the game. For more information on accessing your BIOS, please see your laptop/motherboard manufacturer manual.

If you’re using a multi-GPU setup such as NVIDIA’s SLI or ATI’s Crossfire technologies, we recommend experimenting with disabling these settings, as they may cause compatibility issues with the game.

Capcom does not warrant nor officially provide technical support for PCs that do not meet the official, minimum system requirements.

2. Add the game’s folder and files to your anti-virus program’s exception / exclusion list

Some launching issues may be attributed to certain Anti-Virus software preventing the game executable from launching due to a false-positive error. We recommend users add all of the following files and folders to the Anti-virus and Firewall exclusion list to prevent this issue. If these files and folders were already added previously, try removing them from the exclusion list and re-adding them.

Note: To quickly access the following folders, press Windows Key + R then copy and paste the folder URL below.

re2.exe Default Location: C:\Program Files (x86)\Steam\steamapps\common\RESIDENT EVIL 2 BIOHAZARD RE2

Steam.exe Default Location: C:\Program Files (x86)\Steam

Steam AppData Default Location: C:\Users\%USERNAME%\AppData\Local\Steam

For a guide on adding exceptions to your anti-virus software, please visit one of the following links:

1. Windows Defender[support.microsoft.com]
   
2. Microsoft Security Essentials[answers.microsoft.com]
   
3. Malwarebytes[www.malwarebytes.com]
   
4. Avast Antivirus[www.avast.com]
   
5. AVG Antivirus[support.avg.com]
   
6. Kaspersky Anti-Virus[support.kaspersky.com]
   
7. Webroot SecureAnywhere[www5.nohold.net]
   
8. McAfee Antivirus (Steam Support guide)
   
9. Bitdefender*[www.bitdefender.com]

*For Bitdefender, you will need to also add the game’s .exe file to the program’s Whitelist. To do this, follow these steps:

1. Open Bitdefender
   
2. Go to the Protection tab
   
3. Click “View Feature”
   
4. Click the gear icon inside the “Advanced Thread Defense” box
   
5. Select “Add applications to the whitelist”
   
6. Browse and navigate to the .exe file
   
7. Once the .exe file is added, close Bitdefender and relaunch the game

3. Give administrator privileges to Steam and the game

Some users can get the game running properly by running Steam.exe in administrator mode. This can be done by right-clicking on the .exe file and selecting “Run as administrator.” If that doesn’t work, try running the game’s .exe file in administrator mode as well.

4. Update your Video/Graphics Drivers and Windows Operating System

Try updating your video card drivers, as oftentimes outdated drivers can cause a variety of issues ranging anywhere from in-game graphical problems, to the game not starting, and more.

For the latest Nvidia drivers, click here[www.nvidia.com].
For the latest AMD drivers, click here[support.amd.com].

Additionally, please ensure that Windows Update has been run and that all the latest updates have been installed on your operating system.

If you still experience issues, you may want to try performing a clean installation of the video driver set. This will remove any extraneous driver DLL files or game profiles that existed with the previous driver installation.

To do a clean video driver install, many enthusiasts use a third-party program called Display Driver Uninstaller[www.guru3d.com] (DDU), which completely removes components that were part of the original driver installation package.

1. Run DDU and uninstall old video driver.
   
2. Install the latest OEM video card driver and reboot your PC.
   
3. Run the latest DirectX installer package[www.microsoft.com] and reboot your PC.

IMPORTANT! Please don't forget to reboot Windows upon completing a video driver installation. This will help reinitialize the driver and the graphics card using the new driver.

5. Check your graphics driver settings & computer power settings

To reiterate, some high end integrated graphics chips and modern laptop class discrete GPUs may work, but have not been tested, nor are they officially supported by Capcom. Laptops with dual GPUs, such as an Intel Integrated Graphics Processor + Nvidia Dedicated Graphics Card, may need additional configuration in the event the integrated processor is overriding the dedicated graphics drivers.

If using a dual Nvidia / Intel GPU, follow these steps:

1. Install the latest Intel integrated drivers[downloadcenter.intel.com]
   
2. Reboot your PC
   
3. Open Nvidia Control Panel
   
4. Click 'Manage 3D Settings'
   
5. Go to 'Program Settings' and then select the game (if it is not in the list you can add it manually by clicking 'Add')
   
6. Scroll down to 'Power Management Mode'
   
7. Set it to 'Prefer Maximum Performance' / ‘High Performance Processor’ instead of 'Adaptive'
   
8. Close Nvidia Control Panel and launch the game

If using a dual AMD “Switchable Graphics” GPU, follow these steps:

1. Open AMD Catalyst Control Center
   
2. Under “Switchable Graphics”, select the High Performance section and select the game (if it is not in the list you can add it manually by clicking 'Browse')
   
3. Click ‘Apply’
   
4. Close AMD Catalyst Control Center and launch the game

Additionally, double-check your desktop / laptop’s power settings by performing the following:

1. If using a laptop, ensure the charger is connected
   
2. Open Control Panel
   
3. Select Power Options
   
4. Select “Change Plan Settings”
   
5. Select “Change advanced power settings”
   
6. From within the dropdown menu, select “High performance” and click ‘Apply’ then ‘OK’
   
7. Launch the game

6. Update DirectX

We recommend downloading and running the DirectX End-User Runtime Web Installer[www.microsoft.com] to ensure DirectX is fully up to date.

7. Update your Windows Media Player codecs

Certain cutscene segments use video playback which relies on Windows' default Media Player codec.

If you're experiencing video playback issues during cutscenes, please try installing Microsoft's Media Feature Pack from the link below. Certain Windows editions, particularly in EU territories and Korea, may not have Windows Media Player and its codec preinstalled.

Windows 8 or newer: https://support.microsoft.com/ja-jp/help/3145500/media-feature-pack-list-for-windows-n-editions

Windows 7 series: https://www.microsoft.com/en-us/download/details.aspx?id=16546

If you have separately installed another codec, there may be compatibility issues with certain video codec which may cause video corruption issues during gameplay. If you're using a different codec besides Media Feature Pack, please ensure the codec is configured so it does not run under Media Foundation.

8. Verify the game’s cache in Steam

Try verifying the game's cache in Steam. You can do so by following the steps outlined in this Steam support article (reposted below). This may find missing or damaged files that need to be repaired, even if you've just installed the game. You may also try temporarily disabling your anti-virus while verifying the cache or launching the game, as on occasion anti-virus programs may flag games or the files necessary to play them as a virus.

To verify the game’s cache, follow these steps:

1. Restart your computer and launch Steam
   
2. From the “Library” section, right-click on the game and select “Properties” from the menu.
   
3. Select the “Local files” tab and click the “Verify integrity of game files...” button.
   
4. Steam will verify the game's files - this process may take several minutes.
   
5. Important: One or more files may fail to verify. This is normal for most Steam games. The files that fail to verify are local configuration files that should not be replaced as part of this process. You can safely ignore this message.

This process allows the Steam client to scan every single file you downloaded for this game, verify checksum of each, and compare that against the file manifest data on Steam's content server. If the file is missing or has a different checksum value, you will receive a message stating "X files failed to validate and will be reacquired." What this means is that some files have either been deleted, or may have been corrupted. Click “Close,” and Steam will automatically download and / or replace the problematic files.

If you still experience visual / audio-related issues or crashes, please provide the detailed information below.

A) Your System Specs

1) CPU name & model
2) Name / model of the desktop or laptop (if available)
3) Graphics card / chip model and the amount of VRAM
4) Video driver version number
5) System memory size
6) OS version (Windows 7, 8, 10, 64-bit/32-bit, etc. Please make special note in your specs if you are running Windows "N" and "K" editions that do not come with Windows Media Player.)
7) Anti-virus software name and version
8) Your monitor and/or HDTV model number (if using multiple displays, please provide all make and model numbers)
9) HDMI cable brand and model number (if available). Please confirm whether your HDMI cable is certified or compatible with 4K and HDR.
10) Your region (continent and/or country)

A good deal of this information, such as the graphics card model and VRAM, are available by running a DxDiag report.

To create a DxDiag report:

1. Open a "Run" dialog in Windows. This can either be done by typing "run" into Start Search, or by holding the Windows key and pressing "R." (Either method works in Windows 7, 8, 8.1, and 10.)
   
2. Type "dxdiag" (with or without quotes) into the box that comes up.
   
3. From the DirectX Diagnostic Tool window, wait for the tool to gather the information it needs, then click "Save All Information..." which will ask you to save a text file, named "DxDiag.txt" by default. Save this file somewhere where it will be easy to find, then attach it in your response.

B) Your Graphics Settings

Your graphics settings for the game can be found in the re2_config.ini file, located in the game’s installation folder. Open the file using a word processor such as Notepad or Wordpad and copy and paste the text found inside.

C) Give as many details about your issue as possible

Please share your specific issue and the location(s) where you’re experiencing the issues – for example, if you’re having problems with the framerate, is it happening constantly, or is it during certain modes, during gameplay, etc.? The following information can greatly help as well:

• Have you confirmed you’ve met at least the minimum system requirements for the game (See Step 1 in the Troubleshooting Guide)?
  
• Where and when did the issue occur?
  
• What were the character(s) doing when this issue occurred?
  
• Did the issue resolve itself when you rebooted the game?
  
• Please also attach any screenshots or video of your issue, preferably via a Dropbox[www.dropbox.com], Google Drive[www.google.com], or OneDrive[www.onedrive.live.com] link.

D) Detailed reproduction steps, if consistently reproducible

The more detailed info you can provide, the quicker the error can be attempted to be reproduced and investigated.

Thank you for your patience and support!

Best Regards,

Capcom Customer Support

Please note that this thread is only for posting issues with the game and specifications for Resident Evil 2 / BIOHAZARD RE:2; in the interest of staying on-topic, any extraneous discussion or derailment may be removed.

[Hakunushi]

Game always crashes on specific point of the game, when going up the police chief elevator for the first time with the message "Fatal D3D Error (25)" on file renderdevicedx12.cpp on line 277.

I'm using medium ray tracing (predefined configs) on 1080p

------------------
System Information
------------------
Time of this report: 1/1/2023, 15:47:53
Machine name: JHON-3050
Operating System: Windows 11 Home Single Language 64-bit (10.0, Build 22621) (22621.ni_release.220506-1250)
Language: Portuguese (Regional Setting: Portuguese)
System Manufacturer: Dell Inc.
System Model: Dell G15 5520
BIOS: 1.12.0 (type: UEFI)
Processor: 12th Gen Intel(R) Core(TM) i5-12500H (16 CPUs), ~2.5GHz
Memory: 16384MB RAM
Available OS Memory: 16068MB RAM
Page File: 9951MB used, 21476MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 12
DX Setup Parameters: Not found
User DPI Setting: 120 DPI (125 percent)
System DPI Setting: 120 DPI (125 percent)
DWM DPI Scaling: UnKnown
Miracast: Available, with HDCP
Microsoft Graphics Hybrid: Supported
DirectX Database Version: 1.4.3

[Vlad]

A
1) Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz (8 CPUs), ~3.4GHz
2) -
3) NVIDIA GeForce GTX 1060 6GB
4) 527.37
5) 8192MB
6) Windows 10 Home 64-bit (10.0, Build 19045) (19041.vb_release.191206-1406)
7) -
8) EIZO FS2333
9) - (DVI)
10) Russian Federation

B
[Render]
PCTargetAPIFallback=Enable
Capability=DirectX12
TargetPlatform=DirectX11
UseVendorExtention=Enable
UseOptimizeShader=Enable
MainMenu=False
LastCrashReport=
[RenderConfig]
PCDXver=DirectX11
PCColorSpace=1
PCWindowMode=0
PCResolution=16
PCRefreshRate=0
PCFrame_Rate=0
PCVSync=1
PCRenderingMethod=0
PCImage_Quality=7
PCTextureQuality=5
PCSamplerQuality=5
PCMeshQuality=3
PCAntiAliasing=3
PCMotionBlurEnable=0
PCShadowQuality=4
PCShadowCacheEnable=0
PCAOSetting=0
PCBloomEnable=0
PCLensFlareEnable=0
PCVolumeLight=0
PCReflection=1
PCSSSS=0
PCDOF=1
PCLensDistortion=0
PCFilmGrainNoise=0
PCContactShadow=1
PCParticleLight=0
[Display]
HDRmode=1

C
Menu section "Bonuses" > "Models". Inspection of the model "Ada Trench Сoat".
The model has broken cloth physics [dx11_non-rt].

https://i.imgur.com/qbuI14Z.png

https://i.imgur.com/xFpbTSP.png

Frame rate is limited using Riva Tuner Statistics Server 7.3.3 (30 fps).
The in-game frame rate limit (30 fps) doesn't solve the problem.

It's the first time I've seen this bug, it's constantly reproduced.

[Vlad]

A
1) Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz (8 CPUs), ~3.4GHz
2) -
3) NVIDIA GeForce GTX 1060 6GB
4) 527.37
5) 8192MB
6) Windows 10 Home 64-bit (10.0, Build 19045) (19041.vb_release.191206-1406)
7) -
8) EIZO FS2333
9) - (DVI)
10) Russian Federation

B
[Render]
PCTargetAPIFallback=Enable
Capability=DirectX12
TargetPlatform=DirectX12
UseVendorExtention=Enable
UseOptimizeShader=Enable
MainMenu=True
LastCrashReport=
[RenderConfig]
PCDXver=DirectX12
PCColorSpace=1
PCWindowMode=0
PCResolution=16
PCRefreshRate=0
PCFrame_Rate=0
PCVSync=1
PCRenderingMethod=0
PCImage_Quality=5
PCTextureQuality=5
PCSamplerQuality=1
PCMeshQuality=3
PCAntiAliasing=3
PCMotionBlurEnable=0
PCShadowQuality=4
PCShadowCacheEnable=1
PCAOSetting=0
PCBloomEnable=0
PCLensFlareEnable=0
PCVolumeLight=0
PCReflection=1
PCSSSS=0
PCDOF=0
PCLensDistortion=0
PCFilmGrainNoise=0
PCContactShadow=1
PCParticleLight=0
NormalWindowResolution=(0.000000,0.000000)
FullScreenDisplayMode=32
FullScreenMode=false
WindowMode=Normal
PCGIReflection=1
PCRaytracingReflection=1
PCFidelityFXResolution=0
PCRaytracingAO=0
[Display]
HDRmode=1

C
This object always casts a low-poly shadow
(Resident Evil 2 and Resident Evil 2 [dx11_non-rt]).

Issue: https://i.imgur.com/wWcPZsA.png

Location: https://i.imgur.com/xARVnjW.png

[danny621]

I can't enter the door in the laboratory, as if there is a transparent door

Nguyên văn bởi Capcom Customer Service:

"If you see one of those things—uniform or not—you do not hesitate. You take it out...or you run. Got it!?" - Marvin Branagh, Resident Evil 2

We hope you’re all enjoying or will be enjoying Resident Evil 2 / BIOHAZARD RE:2 shortly! While we hope all of our fans will have a great time with the game, there will always be some cases here and there where the game may not function correctly under certain environments and / or hardware combinations.

We’ve set up this troubleshooting and feedback thread for you all to share any technical issues you may be having with the game.

Before providing any reports, please ensure you've followed the steps below to rule out problems with your PC, Steam, or the game’s files:

Troubleshooting Guide

1. Check the game’s system requirements

Please make sure you meet the minimum requirements for the game, outlined on the bottom of the game’s Steam Store page; if you do not meet the minimum requirements for the game, this may result in poor framerate, or the game not running.

If you do meet the minimum specifications but not the recommended specifications, you may want to try turning down the graphics settings, if you haven't already. Please note that most graphical settings changes require the game to be restarted in order for the changes to take effect.

Some high end integrated graphics chips and modern laptop integrated GPUs may work, but have not been tested, nor are they officially supported by Capcom. If you’re using a laptop with a dual GPU dedicated graphics card and integrated graphics processor, we recommend disabling your integrated graphics via the BIOS settings prior to launching the game. For more information on accessing your BIOS, please see your laptop/motherboard manufacturer manual.

If you’re using a multi-GPU setup such as NVIDIA’s SLI or ATI’s Crossfire technologies, we recommend experimenting with disabling these settings, as they may cause compatibility issues with the game.

Capcom does not warrant nor officially provide technical support for PCs that do not meet the official, minimum system requirements.

2. Add the game’s folder and files to your anti-virus program’s exception / exclusion list

Some launching issues may be attributed to certain Anti-Virus software preventing the game executable from launching due to a false-positive error. We recommend users add all of the following files and folders to the Anti-virus and Firewall exclusion list to prevent this issue. If these files and folders were already added previously, try removing them from the exclusion list and re-adding them.

Note: To quickly access the following folders, press Windows Key + R then copy and paste the folder URL below.

re2.exe Default Location: C:\Program Files (x86)\Steam\steamapps\common\RESIDENT EVIL 2 BIOHAZARD RE2

Steam.exe Default Location: C:\Program Files (x86)\Steam

Steam AppData Default Location: C:\Users\%USERNAME%\AppData\Local\Steam

For a guide on adding exceptions to your anti-virus software, please visit one of the following links:

1. Windows Defender[support.microsoft.com]
   
2. Microsoft Security Essentials[answers.microsoft.com]
   
3. Malwarebytes[www.malwarebytes.com]
   
4. Avast Antivirus[www.avast.com]
   
5. AVG Antivirus[support.avg.com]
   
6. Kaspersky Anti-Virus[support.kaspersky.com]
   
7. Webroot SecureAnywhere[www5.nohold.net]
   
8. McAfee Antivirus (Steam Support guide)
   
9. Bitdefender*[www.bitdefender.com]

*For Bitdefender, you will need to also add the game’s .exe file to the program’s Whitelist. To do this, follow these steps:

1. Open Bitdefender
   
2. Go to the Protection tab
   
3. Click “View Feature”
   
4. Click the gear icon inside the “Advanced Thread Defense” box
   
5. Select “Add applications to the whitelist”
   
6. Browse and navigate to the .exe file
   
7. Once the .exe file is added, close Bitdefender and relaunch the game

3. Give administrator privileges to Steam and the game

Some users can get the game running properly by running Steam.exe in administrator mode. This can be done by right-clicking on the .exe file and selecting “Run as administrator.” If that doesn’t work, try running the game’s .exe file in administrator mode as well.

4. Update your Video/Graphics Drivers and Windows Operating System

Try updating your video card drivers, as oftentimes outdated drivers can cause a variety of issues ranging anywhere from in-game graphical problems, to the game not starting, and more.

For the latest Nvidia drivers, click here[www.nvidia.com].
For the latest AMD drivers, click here[support.amd.com].

Additionally, please ensure that Windows Update has been run and that all the latest updates have been installed on your operating system.

If you still experience issues, you may want to try performing a clean installation of the video driver set. This will remove any extraneous driver DLL files or game profiles that existed with the previous driver installation.

To do a clean video driver install, many enthusiasts use a third-party program called Display Driver Uninstaller[www.guru3d.com] (DDU), which completely removes components that were part of the original driver installation package.

1. Run DDU and uninstall old video driver.
   
2. Install the latest OEM video card driver and reboot your PC.
   
3. Run the latest DirectX installer package[www.microsoft.com] and reboot your PC.

IMPORTANT! Please don't forget to reboot Windows upon completing a video driver installation. This will help reinitialize the driver and the graphics card using the new driver.

5. Check your graphics driver settings & computer power settings

To reiterate, some high end integrated graphics chips and modern laptop class discrete GPUs may work, but have not been tested, nor are they officially supported by Capcom. Laptops with dual GPUs, such as an Intel Integrated Graphics Processor + Nvidia Dedicated Graphics Card, may need additional configuration in the event the integrated processor is overriding the dedicated graphics drivers.

If using a dual Nvidia / Intel GPU, follow these steps:

1. Install the latest Intel integrated drivers[downloadcenter.intel.com]
   
2. Reboot your PC
   
3. Open Nvidia Control Panel
   
4. Click 'Manage 3D Settings'
   
5. Go to 'Program Settings' and then select the game (if it is not in the list you can add it manually by clicking 'Add')
   
6. Scroll down to 'Power Management Mode'
   
7. Set it to 'Prefer Maximum Performance' / ‘High Performance Processor’ instead of 'Adaptive'
   
8. Close Nvidia Control Panel and launch the game

If using a dual AMD “Switchable Graphics” GPU, follow these steps:

1. Open AMD Catalyst Control Center
   
2. Under “Switchable Graphics”, select the High Performance section and select the game (if it is not in the list you can add it manually by clicking 'Browse')
   
3. Click ‘Apply’
   
4. Close AMD Catalyst Control Center and launch the game

Additionally, double-check your desktop / laptop’s power settings by performing the following:

1. If using a laptop, ensure the charger is connected
   
2. Open Control Panel
   
3. Select Power Options
   
4. Select “Change Plan Settings”
   
5. Select “Change advanced power settings”
   
6. From within the dropdown menu, select “High performance” and click ‘Apply’ then ‘OK’
   
7. Launch the game

6. Update DirectX

We recommend downloading and running the DirectX End-User Runtime Web Installer[www.microsoft.com] to ensure DirectX is fully up to date.

7. Update your Windows Media Player codecs

Certain cutscene segments use video playback which relies on Windows' default Media Player codec.

If you're experiencing video playback issues during cutscenes, please try installing Microsoft's Media Feature Pack from the link below. Certain Windows editions, particularly in EU territories and Korea, may not have Windows Media Player and its codec preinstalled.

Windows 8 or newer: https://support.microsoft.com/ja-jp/help/3145500/media-feature-pack-list-for-windows-n-editions

Windows 7 series: https://www.microsoft.com/en-us/download/details.aspx?id=16546

If you have separately installed another codec, there may be compatibility issues with certain video codec which may cause video corruption issues during gameplay. If you're using a different codec besides Media Feature Pack, please ensure the codec is configured so it does not run under Media Foundation.

8. Verify the game’s cache in Steam

Try verifying the game's cache in Steam. You can do so by following the steps outlined in this Steam support article (reposted below). This may find missing or damaged files that need to be repaired, even if you've just installed the game. You may also try temporarily disabling your anti-virus while verifying the cache or launching the game, as on occasion anti-virus programs may flag games or the files necessary to play them as a virus.

To verify the game’s cache, follow these steps:

1. Restart your computer and launch Steam
   
2. From the “Library” section, right-click on the game and select “Properties” from the menu.
   
3. Select the “Local files” tab and click the “Verify integrity of game files...” button.
   
4. Steam will verify the game's files - this process may take several minutes.
   
5. Important: One or more files may fail to verify. This is normal for most Steam games. The files that fail to verify are local configuration files that should not be replaced as part of this process. You can safely ignore this message.

This process allows the Steam client to scan every single file you downloaded for this game, verify checksum of each, and compare that against the file manifest data on Steam's content server. If the file is missing or has a different checksum value, you will receive a message stating "X files failed to validate and will be reacquired." What this means is that some files have either been deleted, or may have been corrupted. Click “Close,” and Steam will automatically download and / or replace the problematic files.

If you still experience visual / audio-related issues or crashes, please provide the detailed information below.

A) Your System Specs

1) CPU name & model
2) Name / model of the desktop or laptop (if available)
3) Graphics card / chip model and the amount of VRAM
4) Video driver version number
5) System memory size
6) OS version (Windows 7, 8, 10, 64-bit/32-bit, etc. Please make special note in your specs if you are running Windows "N" and "K" editions that do not come with Windows Media Player.)
7) Anti-virus software name and version
8) Your monitor and/or HDTV model number (if using multiple displays, please provide all make and model numbers)
9) HDMI cable brand and model number (if available). Please confirm whether your HDMI cable is certified or compatible with 4K and HDR.
10) Your region (continent and/or country)

A good deal of this information, such as the graphics card model and VRAM, are available by running a DxDiag report.

To create a DxDiag report:

1. Open a "Run" dialog in Windows. This can either be done by typing "run" into Start Search, or by holding the Windows key and pressing "R." (Either method works in Windows 7, 8, 8.1, and 10.)
   
2. Type "dxdiag" (with or without quotes) into the box that comes up.
   
3. From the DirectX Diagnostic Tool window, wait for the tool to gather the information it needs, then click "Save All Information..." which will ask you to save a text file, named "DxDiag.txt" by default. Save this file somewhere where it will be easy to find, then attach it in your response.

B) Your Graphics Settings

Your graphics settings for the game can be found in the re2_config.ini file, located in the game’s installation folder. Open the file using a word processor such as Notepad or Wordpad and copy and paste the text found inside.

C) Give as many details about your issue as possible

Please share your specific issue and the location(s) where you’re experiencing the issues – for example, if you’re having problems with the framerate, is it happening constantly, or is it during certain modes, during gameplay, etc.? The following information can greatly help as well:

• Have you confirmed you’ve met at least the minimum system requirements for the game (See Step 1 in the Troubleshooting Guide)?
  
• Where and when did the issue occur?
  
• What were the character(s) doing when this issue occurred?
  
• Did the issue resolve itself when you rebooted the game?
  
• Please also attach any screenshots or video of your issue, preferably via a Dropbox[www.dropbox.com], Google Drive[www.google.com], or OneDrive[www.onedrive.live.com] link.

D) Detailed reproduction steps, if consistently reproducible

The more detailed info you can provide, the quicker the error can be attempted to be reproduced and investigated.

Thank you for your patience and support!

Best Regards,

Capcom Customer Support

Please note that this thread is only for posting issues with the game and specifications for Resident Evil 2 / BIOHAZARD RE:2; in the interest of staying on-topic, any extraneous discussion or derailment may be removed. [/quote]




@@@@I can't enter the door in the laboratory, as if there is a transparent door@@@@

[Player]

Only black screen shows up when the game is launched. Happens to both RE2 and RE3 remake. Tried beta version too and this time error code 0x80070057 pops out

1) CPU name & model

Ryzen 5700X

2) Name / model of the desktop or laptop (if available)

Custom

3) Graphics card / chip model and the amount of VRAM

A770 LE 16GB VRAM

4) Video driver version number

31.0.101.4091

5) System memory size

96GB

6) OS version (Windows 7, 8, 10, 64-bit/32-bit, etc. Please make special note in your specs if you are running Windows "N" and "K" editions that do not come with Windows Media Player.)

Windows 11

7) Anti-virus software name and version

Nil. Only windows defender

8) Your monitor and/or HDTV model number (if using multiple displays, please provide all make and model numbers)

Irrelevant

9) HDMI cable brand and model number (if available). Please confirm whether your HDMI cable is certified or compatible with 4K and HDR.

Displayport

10) Your region (continent and/or country)

Aus

[Mythicalgames]

my problem is the game doesnt even give me a black screen it syncs to the cloud then closes im running amd ryzen 5 5600
msi tomahawk max motherboard am4 chipset
rx 550 gpu
ive updated all my drivers im at a lost

[WKR]

I just had a visual error on the game. Some details on RE2 gameplay is purple. I had rebooted the game and now is red, and then green.

1) 11th Gen Intel(R) Core(TM) i5-1135G7
2) Acer aspire A514-54
3) Iris Xe grafics 4 GB
4) 30.0.101.1404
5) ROM 256 GB (system) + 120 GB (SSD) and RAM 20 GB
6) Win 11 64 bits
7) Windows defender. Dont have installed antivirus
8) (laptop)
9) (laptop)
10) Brazil

[black409dar]

i try to load the game for the 1 time it turn to the back screen then i try again now i try to run the game on beta mode need help plz

[Dumb Bitch Leon]

I am having frequent crashes at random times on my Steam Deck, followed by a D3D error. Switching to the DirectX 11 beta seems to have fixed this issue, but it happens on Village as well, which only supports DX12.

[jdrednation]

1) Intel I7-13700K
2) ROG STRIX Z790-E GAMING WIFI
3) EVGA +RTX 3080 FTW3 (10GB VRAM)
4) Game Ready Driver 531.41
5) 128GB DDR 5200mhz
6) Windows 11
7) BitDefender 26.0.34.145
8) LD C9 OLED 65" (OLED65C9PUA)
9) Monoprice 8K Certified Ultra High Speed HDMI Cable [HDMI 2.1, 8K@60Hz, 48Gbps] (Product #42673) (UPC #889028168677).
10) United States

**This issue occurs for me whether I'm using the DirectX11 beta or not**
My issue has been the screen immediately blacking out and the TV then losing signal. This occurs right after the production companies roll at the beginning, just after loading. The game loads in a large window before blacking out. I was never able to get to the in-game graphics menu.
Once the screen goes black, it's very difficult to alt+tab out, or bring up the task manager. My RGB lights even go wonky.

I have spent no less than 8 hours worth of my time trying to fix this. I just built a new computer and really wanted to play this. I finally got the game to work 20 minutes ago.

I use a 65" LG C9 OLED TV for PC gaming. Windows 11 is scaled to 300% @ 3840x2160, 60Hz.
I tried every single thing out there; yes, that one too. An odd combination of things lead to the game beginning to work:

1.) Lowered resolution to 1920x1080.
2.) Reduced Windows scaling to 100%.
3.) Turned off G-Sync in the Nvidia Control Panel.
4.) Turned off HDR in Windows Graphics.

After doing these things by complete coincidence, and starting the game for the 174th time, i got the black screen again...So, I started alt+tabbing trying to escape, and by-god, the initial Language Settings screen popped up IN ALL ITS GLORY! It was windowed, but totally visible. After getting to the game's Graphics menu, I was able to set the game to borderless windowed (which, for some reason, my computer seems to prefer with this OLED TV).

Once I got it working, I started re-enabling my old settings. First resolution; then scaling. RE2 was still working. Then I tried enabling HDR in the in-game menu and it immediately went to black screen and never came back. I ended up having to enable "Don't use Auto HDR" under RE2's Windows graphical settings.

[zhimanooka]

1) 13900
2) MSI Z690 Carbon
3) Palit GamingPRO 3070
4) 531.41
5) 32 Gb DDR5
6) Windows 11 PRO 22H2 (22621.1485)
7) Windows Defender
8) LG 27GN850
9) UGreen DP112 / DP114
10) Russia

renderdevicedx12.cpp*277 Fatal D3D error (25)
Allways, switch to DX11 or no-rt version not help

[Autotragisk]

Latest patch removed raytracing from RE2? QA before releasing patch?

[Soul00]

Raytracing option gone for me too

[noSense]

Last update removed ray tracing option.
RTX 3070, ReBAR enabled, diver 531.41

[WattledMirror28]

Ray Tracing gone. on DX12