This update will improve many of the in-game features and campaign flow. You will find improvements in the Orbit View, campaign flow, systems and procedures, and a lot of bug fixes.

Note: If you are experiencing issues with this build you can roll back to the previous using the Steam Betas Tab accessible from the Steam client (games properties).

Wilhelmsen Studios changes its name to Lyra Creative
Let's face it, my surname is not ideal for a company name and I have been wanting to change the name of the company for many years. It's both long and hard to spell/pronounce for non-Norwegians.

The name Lyra (based on the constellation) has been the name of my game engine that Reentry has been built upon and was a natural choice for me.
The name change will be an ongoing process for the next few weeks as a lot of processes are in transition with both the government, Steam and assets.

NASA logos
After a long process with NASA, I have received permissions to use the NASA logos where they were used in real life. This update will roll out NASA logos to various places. It will also apply to for example the Space Shuttle where the logo was used both on the exterior and inside the cockpit. Big shoutout to Daniel Surber (Scorch) who kickstarted and helped me with the process!
Orbit View improvements
A large section of this update is a generic improvement to the Orbit View (F3). The orbit view is now more stable, and all key points are rendered with an icon. You can now easily see the Apogee, Perigee, asc/desc nodes and the position of the space crafts. For apollo, a planned maneuver point is rendered correctly, as well as the entry interface marker. I have also fixed some of the zoom limits in the Apollo Orbit View, and made a smoother transition when changing between for example the CM and the LM view modes.
Hovering the mouse cursor over one of these markers will in some cases show more information of the marker such as the altitude of Ap/Pe.

The icons used to show where the spacecrafts are is based on what icons they used in mission control.

I will continue iterating on the Orbit View, and maybe change some of the icons and coloring, etc.

I have also fixed a blocking issue where the CM/LM zoom levels on the Mission Pad MAP gets stuck if zooming in all the way.

Ocean landing requirement
I have added a setting in Main Menu -> Settings -> Realism Settings that will let you decide if landing on land will complete the mission. Typically during Mercury, Gemini and Apollo, the spacecrafts are designed to land in the ocean, and an atmospheric entry trajectory should be planned with a landing in the ocean.

However, sometimes you might land on land. In the previous update I started working on this, but landing on land did not complete the mission.

You can now choose this yourself, and the toggle is set by default to accept both ocean and land landings.
I have also continued to work on the land landing logic and connected it to the sequencer to cut the chutes and evaluate mission completion (based on the setting above).

Gemini Hydrogen (H2) tank
I have improved the logic of the cryogenic system in Gemini. The Hydrogen and Oxygen consumption has been balanced, and the O2/H2 heater circuit breakers is properly connected to the heater system.
I have also fixed some issues related to the H2 draining as reported by some players.
Apollo "BBQ roll" (PTC) procedures and logic
I have improved the logic around achieving PTC roll in the Apollo CSM. This is a procedure that typically runs most of the coasting period between TLI/T&D and LOI, and during coasting back to earth between TEI and entry. The goal of the procedure is to align the space craft with the sun so the spacecraft sides points towards the sun, and then start a slow roll (typically 0.3 deg/sec) so that the sun and the shadow side "BBQs" the CSM evenly on all sides.

The general procedures for this is to:
1) First set the computer to P00 and accept uplink.
2) Then you need to open the CREW MEMBERS -> REQUEST REFSMMATs -> REQUEST PTC REFSMMAT.
This will uplink a PTC REFSMMAT to the computer. Once uplinked, you need to align to it using P52 Option 1.
3) Use V49E to maneuver to the PTC attitude, this is typically roll=0, pitch=90, yaw = 0.
4) Key V79E on the DSKY:
- N16 shows the time of the maneuver. Leave it to all zeros to start the maneuver immediately and press PRO.
- N79 shows the target rate and dead band. Leave the default values of 0.3 deg/s of roll and press PRO. The maneuver will start.
I have updated the G&C GENERAL -> (V79) ORBRATE/PTC checklist. This also contains how to get out of the PTC roll.

General checklist and campaign fixes
I have been playing through the entire campaign and made updates to both mission files and checklists, and improved the general flow. Major improvements has been made to Mission 2 in campaign 3 for example.

The career tree has also been updated with various fixes (such as missing CM lesson 10 (T&D) etc).
VR: Recenter view
I have started working on an experimental recentering function. Unfortunately, as I am unable to reproduce the "head starts outside the cockpit" issue, I am working in the blind. I have added some more data related to this into issue the logs, and have added a new function that might solve it (or make things worse, let's see!).

Bind the Recenter VR binding (think default is SHIFT+F5), and once you have loaded into the Mercury capsule in VR, press this hotkey and if possible, give me a report of what happens or if it solves the recentering issue or not. :)

The key problem behind this is that there is no standard way or recentering the view in OpenXR, this has been offloaded from their APIs into the hardware of each HMD. Calling the OpenXR APIs to recenter the view are basically empty functions that does nothing. The method I am testing here is my own recentering function.


Patch notes:

• Require ocean landing toggle in Realism Settings
  
• Continued implementing the land landing logic and connected it with sequencers
  
• Fixed: Gemini EPS: FC O2/H2 cbs wired heater to bus
  
• Found the H2 draining issue in Gemini
  
• Apollo CM/LM hatch eq. Psi. fix
  
• Apollo: V79E to set orbrate/ptc roll rate
  
• Apollo CM PTC REFSMMAT procedures
  
• Apollo Crew Members REFSMMAT section changes
  
• Fixed: Apollo map zoom can get stuck on full zoom
  
• Started to improve the Orbit Vew with better and more stable icons and graphics
  
• Career Tree node fixes
  
• Campaign 3 fixes
  
• Minor fixes to the CM SECS logic
  
• Fixed some inverted normals in Gemini cockpit (culling)
  
• Applied the NASA logos where they should be.
  
• Experimental: VR, Recenter View

This update aims to improve a lot of systems, features and bug fixes across all the modules (Mercury, Gemini and Apollo). It touches many of the core features of the game, and fundamental code. This can lead to issues not yet detected during testing. Please let me know if you stumble on anything new.

Note: If you are experiencing issues with this build you can roll back to the previous using the Steam Betas Tab accessible from the Steam client (games properties).

Apollo
Multiple systems has been updated and improved in the Apollo CSM, and various checklists and procedures has been updated.
The main procedures you will need to learn again is the:
- Lunar Module pressurization: New checklist added to the CM T&D section: CM/LM PRESSURE EQ.
- Docking Probe (use gas to retract (Prim or Sec) the probe after extending it), existing checklist updated.

Docking Probe
The general procedure is to extend the docking probe while leaving the RETRACT PRIM/SEC in their middle/OFF position. When the docking probe is extended, set it to RETRACT. When docked, set the RETRACT PRIM/SEC (one of them) to 1 or 2 to start retracting the probe. The probe can retract 4 times, 2x in PRIM and 2x in SEC (for redundancy).

LM Pressurization
The LM is pressurized after docking during T&D, quite early in the mission. I have updated the Lunar Module Academy lesson 1 to cover the procedure.
I have also corrected an issue with the attitude hold during lunar ascent. However, you will need to key V77E (if this is the requested mode) if ATT HOLD input does not generate a rate acceleration, even if the panels are correctly configured (the LGC will need to know, and some programs can override the setting).

I have also made an overhaul of the CSM SM/CM RCS system and its monitoring on MDC-2.
Mercury gyros
I have updated the logic around the Mercury gyros and the alignment of them. Please note that if you go back to the normal gyro panel setting, the gyros will be slaved to the Horizon Scanners.
Dynamic Skybox during landing
I have improved the landing areas to account for the correct time as you land. This will make it possible to land during the day, or during the night. The time of day at the landing location controls the lighting conditions. It will be quite dark when you land during night, so I will try to add some landing aid/lights if they existed. When you plan a retrograde burn for atmospheric entry, try to plan an entry that lands during the day.
Mercury horizon scanners
I have improved the Mercury horizon scanner logic to better detect the "temperature differences" between Earth and Space. An issue originating back to the TSS (True Scale System) updates has made them have a slight offset depending on various conditions. This has now been fixed.
Removed the Waterworld
The infamous "Waterworld" bug/feature has been removed. The reason for this was the way fog is rendered during landing.

Landing area
I have started the process of differentiating between water and land after entry. If you land in the ocean, you will see the normal ocean landing area as you are used, except for different lighting conditions based on time at the landing area. If you land on land, a temporary and very simple (currently) land model will be rendered instead. I will improve the land area, and maybe look into something more procedural generated landscape in future patches.

When you plan a reentry, always try to land in the ocean.

Please note that you will not complete the mission if you land on land (please let me know if you want this to change - I will also consider it based on feedback and reports I get).
Mercury lessons
I have updated the Mercury lessons to better teach you what the nominal values for the various gauges and instruments are.
The map tab in the Mercury Mission Pad has also received orbit info, as Gemini and Apollo has.
Apollo missions
I have updates all Apollo missions and states with sun positioning logic corrections. I have also improved multiple lessons, and specifically improved the Earth Entry lessons. The "Apollo 8" (Campaign 3) and "Apollo 11" (Campaign 4) fictional missions has received many updates and sequence fixes based on new features and procedure changes over the years.
Apollo Sun Positioning issue fixed
Finally tracked down a very old issue where the sun orientation data saved into Apollo (Apollo only) Save States are wrong. This has been corrected but it might require you to use the sp console command to correct the sun position in previous save states. However, the save states should have stored the position correctly, but incorrectly load it.

I have also fixed the issue where the sun gets a slight offset (~0 - 10 degrees) as you enter the Lunar Sphere of Influence.
0.99.19 release notes

• Updated the later Mercury lessons to cover what instruments and gauges should show.
  
• Mercury Gyro logic fixes
  
• Horizon scanner updates to better detect the Earth horizon
  
• Mercury capsule model slight rotation offset (8 - 10 degrees) removed
  
• Mercury Reflection Probe panel brightness fix
  
• Apollo Earth Entry Academy lesson updates
  
• Dynamic Skybox during landing
  
• Landing system updates
  
• Reentry plasma effect updates
  
• Apollo Sun Positioning issue fixed
  
• Added orbit info into the Mercury Mission Pad (as Gemini and Apollo has)
  
• Fixed the missing atmosphere in the Gemini Orbit View
  
• Updates to the CSM SM/CM RCS systems, and monitoring
  
• Apollo CSM cabin repress and ECS updates
  
• Apollo CSM LM pressurize updates
  
• Updates to the CSM docking probe logic
  
• Apollo Campaign 3 mission updates and fixes
  
• Apollo Campaign 4 mission updates and fixes
  
• LM Att Hold after Lunar Ascent (Key V77 if it does not work)
  
• Fixed the "Offscreen Switch Indicator" setting (the graphics that will lead you towards a highlighted switch). You can now disable the Offscreen Switch Indicator again, if you desired to do so.