VR is superb !! Has something changed ?

[Coffeeguy66]

I could be wrong here but has the developer updated the VR side of ACC ? I bought the GT2 DLC and last night fired up my Metaquest 3 to give the new DLC a try , didn't mess with any settings, chose a track and the GT2 Ferrari and flipping heck !! I was blown away by the clarity and smoothness of the race!!
The last time I tried this game in VR it was awful, lots of messing with settings to get it looking anywhere near this good.
I'm not complaining, one very happy customer here !!

[goblueteam]

ah i had a feeling that was the case as i had not seen any news of updates to the game regarding VR maybe people just upgraded hardware or drivers got a little better or something a long those lines.

[Remcob78]

I got itbto work yess thanks for your help 😇🙏🏻

[Remcob78]

What settings you have in openxr toolkit with a rtx 4090

[goblueteam]

i would think with a 4090 you wouldnt need to mess around with these extra things so i have to assume it actually isnt really any better than it was in the past....

[Remcob78]

it is defenitly better performance

[Gulivert]

Messaggio originale di Remcob78:

What settings you have in openxr toolkit with a rtx 4090

Nice finally you got it working 😀 glad to earn.

For settings : in game set maximum with AA to temporal and active TAA.
Do not active DLSS or FSR because the images will look a lot blurry and you do not need with a 4090. Set the resolution to 100% and VR density to 200%.

Then in OpenXR overlay only activate Upscaling/Sharpening to CAS, and set sharpened to 100%, this will render a clearer images. You can also activate the fps monitor and set the fps target, this is just to verify that you get the target fps.

In Oculus app set the maximum resolution with needed refresh rate. Try first at 72. If you game run smoothly to this value you can try 90.


Then end, if you have a troubles to keep the target fps, you can adjust the vertical fov in oculus debug tool. Like setting to 0.7, this will render 70% of the height of the resolution and will increase the performance quite a lot.

[Remcob78]

Messaggio originale di Gulivert:

Messaggio originale di Remcob78:

What settings you have in openxr toolkit with a rtx 4090

Nice finally you got it working 😀 glad to earn.

For settings : in game set maximum with AA to temporal and active TAA.
Do not active DLSS or FSR because the images will look a lot blurry and you do not need with a 4090. Set the resolution to 100% and VR density to 200%.

Then in OpenXR overlay only activate Upscaling/Sharpening to CAS, and set sharpened to 100%, this will render a clearer images. You can also activate the fps monitor and set the fps target, this is just to verify that you get the target fps.

In Oculus app set the maximum resolution with needed refresh rate. Try first at 72. If you game run smoothly to this value you can try 90.


Then end, if you have a troubles to keep the target fps, you can adjust the vertical fov in oculus debug tool. Like setting to 0.7, this will render 70% of the height of the resolution and will increase the performance quite a lot.

Thanks man for you help. I try that tonight 😊😊

[Gulivert]

Ok got a 4090 today, which I run with a 14700k from intel with a Quest 3.

I can push all games settings to maximum excepted Shadow set to high and game resolution to 90%. VR density still push to 200%.

I run Oculus app with max resolution @ 72hz.

Oculus debug I set bitrate to 900, encode resolution to 4128 and sharpening to quality.
Then to get permanent 72FPS I must set a FoV multiplier : H = 0.92 and V = 0.35.

Keep in mind that this is for Quest 3, with a Quest 2 you mayby can push less fox like v to 0.5. You need to try. Reducing game resolution will help a lot if needed but behind 80% start too blurry for me.

I will now tried some settings to get 90fps...

[DingBatDave]

Messaggio originale di Coffeeguy66:

I could be wrong here but has the developer updated the VR side of ACC ? I bought the GT2 DLC and last night fired up my Metaquest 3 to give the new DLC a try , didn't mess with any settings, chose a track and the GT2 Ferrari and flipping heck !! I was blown away by the clarity and smoothness of the race!!
The last time I tried this game in VR it was awful, lots of messing with settings to get it looking anywhere near this good.
I'm not complaining, one very happy customer here !!

Aye, agreed. Its very very smooth. I have the Oculus Rift S and i reckon ACC
is the best performing sim racing game i have that works with VR.

and indeed I am genuinely 2 or 3 tenths faster in VR over the flat screen.
So smooth. nailing apexes.

it's a delight.

[Remcob78]

Messaggio originale di Gulivert:

Ok got a 4090 today, which I run with a 14700k from intel with a Quest 3.

I can push all games settings to maximum excepted Shadow set to high and game resolution to 90%. VR density still push to 200%.

I run Oculus app with max resolution @ 72hz.

Oculus debug I set bitrate to 900, encode resolution to 4128 and sharpening to quality.
Then to get permanent 72FPS I must set a FoV multiplier : H = 0.92 and V = 0.35.

Keep in mind that this is for Quest 3, with a Quest 2 you mayby can push less fox like v to 0.5. You need to try. Reducing game resolution will help a lot if needed but behind 80% start too blurry for me.

I will now tried some settings to get 90fps...

oke thanks i will try these settings and nice that you also have a 4090

[Remcob78]

Messaggio originale di Remcob78:

Messaggio originale di Gulivert:

Ok got a 4090 today, which I run with a 14700k from intel with a Quest 3.

I can push all games settings to maximum excepted Shadow set to high and game resolution to 90%. VR density still push to 200%.

I run Oculus app with max resolution @ 72hz.

Oculus debug I set bitrate to 900, encode resolution to 4128 and sharpening to quality.
Then to get permanent 72FPS I must set a FoV multiplier : H = 0.92 and V = 0.35.

Keep in mind that this is for Quest 3, with a Quest 2 you mayby can push less fox like v to 0.5. You need to try. Reducing game resolution will help a lot if needed but behind 80% start too blurry for me.

I will now tried some settings to get 90fps...

oke thanks i will try these settings and nice that you also have a 4090

WHAT CAN YOU GET WITH 90 FPS HAVE YOU TESTED YET? WHAT DO YOU CHANGED IN OPENXR TOOLKIT OR ONLY CAS AND 100% SHARPNESS WHAT SETTINGS ARE IMPORTEND

[Remcob78]

AND WHAT SHARNING IN GAME DO YOY HAVE SET 300%?

[Gulivert]

I just did a small test for 90hz but did not try to find the best settings, I just pushed down game resolution to 80% and keep everything else as same as I use with 72hz. It was more and less ok. But what I see is that I’m currently happy to my settings with 72hz.

For openxr only CAS with 100% sharpness is important. This is just to improve the images quality.

Then yes in game sharpening set to 300.

If I found time I will maybe create a video to explain the whole settings and show the results in to the lenses.

[Remcob78]

Ah super that would be great

[Remcob78]

When I start the game with openxr toolkit and steam then the menu in acc is very dark. In oculus mode is it normal. Do you no how I can fix that. The in game colour settings do nothing When I change it.