Dead or School

Dead or School

View Stats:
 This topic has been pinned, so it's probably important
__eb  [developer] Oct 11, 2019 @ 5:18am
L/R Trigger problems L/R同時押し問題について
The main problem:
1. L/R trigger does not respond (= axis 9 and axis 10 are not recognized)
2. Stands when trying to shoot a machine gun strong attack with L/R trigger (= Registered as Axis 3 for Normal Attack and Strong Attack)
3. Can't shoot strong attacks with PS4 controller(= through steam controller settings)

Solution:
1 or 2:
Make the controller recognize axis 9 and axis 10, and return the key assignment to the default.
3:
Please refer to the following.

When starting from BigPictureMode, please take the following actions for each controller.
■ XBox Controller
- Check "Xbox ~ support" in global settings
- Select "Global Settings" for controller options for each game
(Probably the default setting.)
■ PS4 Controller
- Select "forced off" in the controller options for each game
- Select the "Wireless Controller" device on the settings screen in the game.
■ DirectInput
- Check "generic ~ support" for global settings
- Select "Global Settings" for controller options for each game
(Probably the default setting.)

・About the trouble that the L / R trigger is pressed simultaneously:
In this game, the L / R trigger axis 9 and axis 10 are assigned to controllers other than PS4.
I do not understand well, but there are times when axis 9 and axis 10 cannot be recognized.
If that happens, the attack button and the strong attack button will not respond at the time of the default key assignment. In this state, if you register an L / R trigger on the settings screen, they will be registered as Axis 3- and Axis 3+ respectively, and will be 0 when they are pressed simultaneously, so returning to the idle state.
As long as the system data that saved with this key assignment is loaded, the machine gun strong attack will not be able to hit the L/R.
In that case, press the "Reset to Default" button to reset the key assignment to axes 9 and 10.

・ When axes 9 and 10 cannot be read
I don't know well, but here it responds by turning on / off the controller or check/uncheck repeatly global settings in BigPictureMode in my case.

・ About PS4
It may work even in the BigPicture mode controller settings, but here I have confirmed that it works if you set the “Forced off” in the controller options for each game and set the device to WirelessController on the settings screen in the game.

I uploaded the controller test tool to the ControllerTest branch, so I hope you can use it for verification.
If nothing is displayed on axes 9 and 10 when the trigger is pressed, the controller is not responding.

===================================
主な問題:
1.L/Rトリガーが反応しない(=軸9、軸10が認識できていない)
2.L/Rトリガーでマシンガン強攻撃を撃とうとすると立ってしまう(=通常攻撃と強攻撃に軸3で登録されている)
3.PS4コンで強攻撃が撃てない(=steamのコントローラ設定を介してしまっている)

解決方法:
1 or 2:
コントローラに軸9、軸10を認識させて、キーアサインをデフォルトに戻してください。
3:
下記を参照してください。


BigPictureModeから起動している場合、コントローラ毎に下記の対処をお願いいたします。
■XBox Controller
・グローバル設定ではXBoxサポートにチェック
・ゲーム毎のコントローラのオプションではグローバル設定を選択
(おそらくデフォルトの設定です。)
■PS4 Controller
・ゲーム毎のコントローラのオプションでは強制オフを選択
・ゲーム内のコンフィグ画面でWireless Controllerデバイスを選択してください。
■DirectInput
・グローバル設定では一般サポートにチェック
・ゲーム毎のコントローラのオプションではグローバル設定を選択
(おそらくデフォルトの設定です。)

・L/Rトリガーが同時押しの不具合について
このゲームでは、PS4以外のコントローラについてはL/Rトリガーそれぞれ軸9,軸10軸を割り当てています。
よくわかりませんが、軸9、軸10が認識できないときがあります。
そうなると、まずデフォルトのキーアサイン時に攻撃ボタンと強攻撃ボタンが反応しなくなります。その状態で、コンフィグ画面でL/Rトリガーを登録すると、それぞれ軸3-, 軸3+と登録されてしまい、同時押し時に0となってしまい、アイドル状態に戻る挙動となります。
このキーアサインが保存されたシステムデータをロードする限り、マシンガン強攻撃がLRで打てない状態になってしまいます。
その際は「デフォルトに戻す」ボタンを押してキーアサインを軸9,10にリセットしてください。

・軸9,10が読み込めないとき
よくわかっていないのですが、こちらではコントローラのオンオフやBigPictureMode内のグローバル設定のチェックオンオフ等で反応するようになりました。

・PS4について
BigPictureモードのコントローラ設定でも動くかもしれませんが、こちらではゲーム毎のコントローラオプションで「強制オフ」に設定し、デバイスをWirelessControolerに設定してもらえば動くことを確認しております。

ControllerTestブランチにコントローラテストツールをアップしたので、確認用に使ってもらえればと思います。
トリガーを押しても軸9,10に何も表示されてなければコントローラが軸9,10を認識できていないということになります。
Last edited by __eb; Oct 11, 2019 @ 5:47am
< >
Showing 1-2 of 2 comments
MooerFoes Nov 15, 2019 @ 9:19pm 
Here are some helps for people who using Chinese:
各位好,我在使用PS4手柄连接电脑玩DEAD OR SCHOOL,出现了L1和R1键无法识别的问题,在解决这一问题后又出现了L1+R1键一起按无法识别的问题,这是我的解决方法,供各位参考:
打开STEAM大屏幕模式,关闭PS4手柄的支持
进入游戏,用鼠标点击的方式进入设置页面,对手柄控制的每一个项目都调整一下,这时候PS4手柄会被识别为XBOX手柄,很多内容识别到的和你输入的是不一样的。调整完以后应该不会有问题了。
最后感谢制作者们努力做出了这个游戏,このゲームを作ってくれてありがとうございます。
Anijha Jun 22, 2022 @ 5:15am 
XboxOneコントローラー使用の場合、ゲームプロパティ→コントローラー項目を「Steam入力を無効にする」に設定することで改善しました。
このゲーム自体がネイティブでコントローラー対応なので問題ありませんでした。
< >
Showing 1-2 of 2 comments
Per page: 1530 50