Missing floor and other panels on corridors after repairs

[Astrostars2025]

So for some reason my base took damage (might have been a glitch with my mod) and a bunch of corridor pieces took major damage but were intact. No big deal. So I went to fix them, and I found that one of the floor pieces was missing in a small corridor. I used the blow torch to bring brought it back to full health, but the floor panel is missing and I need to jump over it every time I go down that hall. I tried using the torch again on the floor, but it didn't have any effect. I would have replaced the while corridor, but I want to know what happened before going back on that way this doesn't happen again.

[CursedXistence]

Yup, sounds like a mod glitch.

I'd make a backup copy of your save if that's a play through you care about, then replace the missing corridors that are glitched. After that I'd travel around to a bunch of the abandoned bases and see if there's any obviously glitched corridors just to make sure it's not a more wide spread issue,

[MikeDH]

Sometimes this happens after damage. There are parts you can print and place in the corridor. There are named "Universal wall panel". After printing take it in the hand and place it on the missing floor. Looks like there are 2 Parts, one for walls and one for the floors. In the list the second one with the highlightet "floor" section should be the right panel. I play without mods and faced the same issue after the corridor gets damaged, but i could repair it like described.

[CursedXistence]

Originally posted by MikeDH:

Sometimes this happens after damage. There are parts you can print and place in the corridor. There are named "Universal wall panel". After printing take it in the hand and place it on the missing floor. Looks like there are 2 Parts, one for walls and one for the floors. In the list the second one with the highlightet "floor" section should be the right panel. I play without mods and faced the same issue after the corridor gets damaged, but i could repair it like described.

Unless they already have, they really need to update the descriptions for those panels then because all they say about them is that it's for added radiation protection. Never would have known they're also for repairing corridors if you hadn't said something about it.

[MikeDH]

I think the description is somehow right. I take a screenshot to show. I only repaired the "floor" and you have to use also the "floor" highlighted panels to repair the walls in a corridor. The panel changes depending on which place you point. To repair all missing parts in a normal corridor (not the short one) i guess you will need 16 panels > 4 bottom / 4 center / 4 top / 2 ceiling / 2 floor panels.
https://steamuserimages-a.akamaihd.net/ugc/2465247790757826642/72E3373F6886C34E802C007B5C340AC614869DB3/?imw=5000&imh=5000&ima=fit&impolicy=Letterbox&imcolor=%23000000&letterbox=false

[Astrostars2025]

Wait a minute, there are panels I need to print?! I didn't know that, but it explains why floor panels were missing in a long corridor of an abandoned base I found, I had to jump over each segment of that like the one spot in my base! Thanks for the feedback and answers everyone!

[amon]

The damage can be permanent and then the damaged part must be removed and replaced with a new one. This is a really old problem in the game. You can usually see this from inside the corridor.