preset JoytoKey config updated

[Kronokill92]

I set up a config to make this game feel less wonky and figured I would share it with you guys. This is for an Xbox 360 controller but PS3/4 could work with Xinput wrapper. As long as your Gothic controls are set to default this should work great.

New additions are the Y button = Enter ,Dpad Up/Down and RS click controls

LS = move
LS click = walk/run
RS = camera
RS click = trade 10 items at a time (hold RS click then use either LS move or RB/LB)
Dpad Left and Right = Strafe
Dpad UP = Player Status
Dpad Down = Quests
A = Jump
B = Action
X = Sheathe/Unsheathe weapon
Y = Sneak/Enter (used to confirm menu screens)
Start = open Menu/backtrack in menus
Back = open Inventory
RT = Forward attack/Auto pickup/interact
LT = Block
RB = Right attack
LB = Left attack

1.To use this code go to where your JoytoKey configs are saved at and create a new Notepad document.
2. Name the document Gothic.cfg or whatever you want.
3. open Gothic.cfg and copy paste the code below into it then save and close it.
4. Done open JoytoKey and you should be set.

 
[General]
FileVersion=57
NumberOfJoysticks=2
NumberOfButtons=32
DisplayMode=3
UseDiagonalInput=0
UsePOV8Way=0
Threshold=340
Threshold2=330
KeySendMode=0
SoundFile=

[Joystick 1]
Axis1n=1, 25:00:00:00, 0.000, 0, 0
Axis1p=1, 27:00:00:00, 0.000, 0, 0
Axis2n=1, 26:00:00:00, 0.000, 0, 0
Axis2p=1, 28:00:00:00, 0.000, 0, 0
Axis3n=2,  -35,   0,   0, 0, 0, 0, 0.000, 0, 95, 1.0, 100, 0, 0, 0
Axis3p=2,   35,   0,   0, 0, 0, 0, 0.000, 0, 95, 1.0, 100, 0, 0, 0
Axis4n=2,    0, -35,   0, 0, 0, 0, 0.000, 0, 95, 1.0, 100, 0, 0, 0
Axis4p=2,    0,  35,   0, 0, 0, 0, 0.000, 0, 95, 1.0, 100, 0, 0, 0
Axis5n=1, 11:26:00:00, 0.000, 0, 0
Axis5p=1, 11:28:00:00, 0.000, 0, 0
Button01=1, 12:00:00:00, 0.000, 0, 0
Button02=1, 11:00:00:00, 0.000, 0, 0
Button03=1, 20:00:00:00, 0.000, 0, 0
Button04=1, 0D:41:00:00, 0.000, 0, 0
Button05=1, 11:25:00:00, 0.000, 0, 0
Button06=1, 11:27:00:00, 0.000, 0, 0
Button07=1, 09:00:00:00, 0.000, 0, 0
Button08=1, 1B:00:00:00, 0.000, 0, 0
Button09=1, 10:00:00:00, 0.000, 0, 0
POV1-3=1, 22:00:00:00, 0.000, 0, 0
POV1-7=1, 2E:00:00:00, 0.000, 0, 0
POV1-1=1, 53:00:00:00, 0.000, 0, 0
POV1-5=1, 4E:00:00:00, 0.000, 0, 0
Button10=1, 11:12:00:00, 0.000, 0, 0

[Basnap]

I remember a guy playing Gothic 1/2 with a wii remote controller.

[Oneeyed]

Oprindeligt skrevet af Basnap:

I remember a guy playing Gothic 1/2 with a wii remote controller.

Link or it didn't happen.

[Basnap]

http://www.youtube.com/watch?v=DYd4yjxoKLY
(didn't watch it, though)

[Kronokill92]

Oprindeligt skrevet af usa scorpion:

thanks, good effort!
Ill try it out

The controls have been updated as I play the game so redownloading may help ya out.

[Sir Trousers McPants]

my joytokey doesnt do anything in gothic 1, i've tested it and it works fine with everything, but Gothic 1 ignores any input given by the controller

[MaGoth]

Oprindeligt skrevet af PewPewKazoo:

my joytokey doesnt do anything in gothic 1, i've tested it and it works fine with everything, but Gothic 1 ignores any input given by the controller

Joystick and gamepad controllers are not supported by the game Gothic1, they will only work in Gothic2 and Gothic2a.

Ps, Maybe later we will add their support in the Gothic1 through SystemPack.
Ps-ps.. facking steam...

[IntrepidSkin]

Oprindeligt skrevet af MaGoth:

Oprindeligt skrevet af PewPewKazoo:

my joytokey doesnt do anything in gothic 1, i've tested it and it works fine with everything, but Gothic 1 ignores any input given by the controller

Joystick and gamepad controllers are not supported by the game Gothic1, they will only work in Gothic2 and Gothic2a.

Ps, Maybe later we will add their support in the Gothic1 through SystemPack.
Ps-ps.. facking steam...

Good effort MaGoth thanks

[Kronokill92]

Oprindeligt skrevet af PewPewKazoo:

my joytokey doesnt do anything in gothic 1, i've tested it and it works fine with everything, but Gothic 1 ignores any input given by the controller

Are you sure you saved after you created your notepad.cfg document? and make sure that you set your in game ketboard controls to default. I know it is obvious but I made the mistake of not saving a couple of times when I tested this which made me think I couldnt share my config. But I tested it multiple times before I sent out this post and I know it will work for Gothic 1 as I have been using it (and loving it) and recreated my config using the same steps above.
Also make sure you close JoytoKey until you have your notepad.cfg completed and that when you reopen JoytoKey check if there are inputs set on the buttons. If there isnt you most likely forgot to save the notepad.cfg.
Last thing if you are lucky/unlucky enough to play this game without the fix for the "ACCESS VIOLATION" problem you may want to add the 2 simple fixes for that problem just search access violation and you will find it. but it seems like that problem arises from the fact that this game doesn't allow you to even alt+tab because it doesnt want any outside programs that could allow you to cheat/change the game which could block out any JoytoKey functions. I dont know though since I'm not a game programmer I just want everyone to experience the Joy of JoytoKey ;)

[Kronokill92]

Oprindeligt skrevet af PewPewKazoo:

my joytokey doesnt do anything in gothic 1, i've tested it and it works fine with everything, but Gothic 1 ignores any input given by the controller

I just had a hard drive crash and when setting this game up for my new computer I found that you can increase both resolution and framerate with some extra patches/switching to windows XP SP3 compatibility mode but changing the compatibility mode disabled my joytokey.
If you did this then change your compatibility settings to your own Operating System and go back to the 1280x720 resolution if you prefer a controller to better graphics.