Flysky FS T6 dont work :(

[SkyHogRC]

My Flysky radio witch i use for playing liftoff and old DRL sim dont work, i did recalibration in windows 10 as well and it didnt help. It seems like it detect my radio but then no stick movement, it will just hang there and will do nothing.....Hope this will get fixed, it worked in the old sim as well ;)

[tonyrulez]

I'm having the same issue. Note: I have an FS-i6 WITHOUT the LCD screen (rebranded transmitter for RTF package), so I can't change anything inside the trasmitter. There should be a "disable reset and restart switches" option during the setup for us unfortunate so we could still play with the game.

[Expecto]

Glitch with transmitters that use PPM signal/Auto restarting races

It's been months that I've been reading users having the same issue as I have:
I follow all the instructions to calibrate the controller and then when I get to set the 'reset' and 'unflip' actions I just skip those assignments because my USB dongle only have support to 4 channels. The problem is that this dongle seems to merge CH4 with CH5, so DRL recognize still the CH5 even when placing 'skip' in that part of the configuration setup, and when I move the yaw slightly to the left (4CH) it reset the race preventing us to play it. I can actually see in the overlay settings the lever going back and forth as I use the yaw.
As they already suggested months ago, this problem could be possible solved just by disabling the functionalities 'reset' and 'unflip' for those who pressed 'skip' at this part of the callibration setup, leaving this features to the command (ALT + R) in the keyboard, and those who have support for more than 4 channels could match using the levers in the transmitter with no issues.
I imagine that this could work beacuse I've been playing previous versions of DRL with no problems and I assume that it was because of this.
I don't know if this will work, but solving this problem will help a lot of people, including me. :)

DRL recognize my transmitter as PPM.
As it follows: I use the FlySky FS-i6x transmitter with the SM100 USB cable, can be found at: https://www.amazon.com/GoolRC-Helicopter-Airplane-Simulator-Controller/dp/B00DR4I4O0

Peace.

[OhGeez!]

Yep. I still have the same issue. Worked fine in version 1.1.1, but has been broke ever since.

[Skip Rogers]

Hi Expecto,

Thanks for sharing your feedback. This is an issue that is being worked on currently and should be resolved soon.

[FPV Shadow]

Първоначално публикувано от SkyHogRC:

error please calibrate, so dont work at all for me with Flysky FS-T6 :(
If i try setup controller i can do first step and then center, after it it wont react anymore, i hope thats helpful :)

I get exactly the same problem. It shows up as unknown or vjoy controller. I've got the flysky fs-i6x

[FPV Shadow]

Well after hours of trying different methods, I finally found one that works on WINDOWS 10. You will need the 6 pin to 3.5mm jack connector and a male to male 3.5mm jack lead. Then go to https://sourceforge.net/projects/smartpropoplus/ and download and install.

On the i6x go into SYSTEM SETTINGS, down to RX SETUP and select OUTPUT MODE, select PPM and i-BUS. Press cancel and go to TRAINER MODE, select ON and switch is set to SwB. STUDENT MODE is off. Make sure all your Aux switches are set to on. Go back to main screen and then select FUNCTIONS, AUX CHANNELS and set Channel 5 to Source SwA and Channel 6 to SwD.

After that is all done you can start up smartpropoplus and connect your transmitter to the pc via the 3.5mm microphone jack (MAJOR NOTE- IF YOUR PC ASKS THEN SET IT TO LINE IN, NOT MIC). It should automatically pick it up and it will show as vJoy Device 1. If you have a line in port on your sound card then just plug it in there.

OPEN UP DRL SIMULATOR, CONFIGURE YOUR TRANSMITTER AND ENJOY!!