Controller problem

[Berti297]

Im the only one who is having issues with my controller? When i configure my controller, i dont use levers, so i skip this set up, but when i save the profile, when i move the sticks the levers also move.

[OhGeez!]

Just in case you need anymore data, I'm still having the same problem with my FlySky FS-i6 connected with this:

https://www.amazon.com/gp/product/B01AAETLVY/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1


Works great on v1.1.1, but on v2.0.7a64-eax moving my right stick (roll/pitch) up and to the right causes it to reset the current race.


I followed these directions, except when leaving swB in Trainer mode, it doesn't work at all. As soon as I flip it up to disable Trainer mode, it's recognized and I can calibrate.:

https://drlracingsimulator.zendesk.com/hc/en-us/articles/115001150792-FlySky-FS-i6-AFHDS-6CH

I've tried positioning the sticks in different positions before I click the next to get into the switch config screens and it doesn't seem to help. It just moves the position where the reset occurs, a little bit.

It seems like the easiest fix would be to program the reset functions to not work on controller input if someone selects Skip. The resets should only work with keyboard input. Just my 2 cents.

EDIT:
And a little more info... no matter how I set up my FlySky FS-i6 I can't get the roll axis (channel 1) to not be sync'ed with swA. Normally, when I move the stick while configuring the reset button, as soon as the game senses the stick movement, the Skip button goes away. If I don't move anything, the Skip button is available and I select it. Even though skip was selected, swA and Channel 1 (roll) are somehow linked.

Hope that made sense.

[MeltrackzFPV]

Publicado originalmente por Marker:

Just in case you need anymore data, I'm still having the same problem with my FlySky FS-i6 connected with this:

https://www.amazon.com/gp/product/B01AAETLVY/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1


Works great on v1.1.1, but on v2.0.7a64-eax moving my right stick (roll/pitch) up and to the right causes it to reset the current race.


I followed these directions, except when leaving swB in Trainer mode, it doesn't work at all. As soon as I flip it up to disable Trainer mode, it's recognized and I can calibrate.:

https://drlracingsimulator.zendesk.com/hc/en-us/articles/115001150792-FlySky-FS-i6-AFHDS-6CH

I've tried positioning the sticks in different positions before I click the next to get into the switch config screens and it doesn't seem to help. It just moves the position where the reset occurs, a little bit.

It seems like the easiest fix would be to program the reset functions to not work on controller input if someone selects Skip. The resets should only work with keyboard input. Just my 2 cents.

EDIT:
And a little more info... no matter how I set up my FlySky FS-i6 I can't get the roll axis (channel 1) to not be sync'ed with swA. Normally, when I move the stick while configuring the reset button, as soon as the game senses the stick movement, the Skip button goes away. If I don't move anything, the Skip button is available and I select it. Even though skip was selected, swA and Channel 1 (roll) are somehow linked.

Hope that made sense.

I am having the same issue after trying all the steps given. I have gotten it to work but lowering my end points on my flysky but the u create othe issues then have to tweak them then u have a mess the finally allows u to fly but not in true gameplay form. End up using subtrim as well as other steps to get it to fly straight as possible thought trimming

[Cartec74]

Thank you for the prompt response. I'm looking forward to using this sim. Have used with an Xbox One S controller, just isn't the same.

[Skip Rogers]

Hey Marker,

Can you tell me what the game calls your transmitter please?

MeltrackzFPV can you please tell me what equipment you're using? The name of the transmitter, a link to the cable you're using and what the game is calling your transmitter when it's plugged in.

Cartec74,

No problem, it's very important to the team that as many controllers are supported as possible.

Thank you!

[OhGeez!]

Publicado originalmente por jlguerrero:

Hey Marker,

Can you tell me what the game calls your transmitter please?

MeltrackzFPV can you please tell me what equipment you're using? The name of the transmitter, a link to the cable you're using and what the game is calling your transmitter when it's plugged in.

Cartec74,

No problem, it's very important to the team that as many controllers are supported as possible.

Thank you!

Down at the bottom right it says PPM

If it would be helpful, tell me how I can get my phone number to you privately and you can call me to troubleshoot.

[MeltrackzFPV]

Im using A Flysky i6 the cable is a flysky sm100 usb and the bottom says ppm

[w!lko]

Publicado originalmente por jlguerrero:

Publicado originalmente por w!lko:

after update my Generic USB Joystick - RIGHT stick don't work properly.
Before update was ok..
So they broke something (in windows is all ok)

Hi there,

Can you try to delete your controller profile and recalibrate it please? Then let me know what happens. Thanks.

@Cartec74 the team is still working on getting the Spektrum transmitters working. I will follow up here as soon as they give me an update.

Thanks!

When I deleted my profile then game recognizes my Generic USB Joystic as XBOX pad.
Still when I pull up right stick I see as move to right direction (pull down = left)
When I pull left or right nothing is happen.
At first time it just work - I see radio controler (not any pad) and calibrate everything was so easy .

[bob the builder]

getting the same issue with "PPM" controller (USB PPM adapter that connects to my Taranis X9D+ via ppm port - my usb port is broken)

[Skip Rogers]

Thanks Marker, I'll keep that in mind if the team needs more information.

@bob the builder and @MeltrackzFPV sorry, but could please post a link to the exact cable you're using. And bob if you could give me the exact model name for the transmitter, it would be very helpful, please.

Thanks!

[Gyurex]

Same issue, anything I put on the channel4, it's moves the switch and resets the game.

Turnigy 9x with openTx
hobbyking usb adapter (gtx3 or something like that, no text or marking on the device)
https://hobbyking.com/en_us/usb-simulator-lead-for-turnigy-gtx3-transmitter-vrc-sim-compatible.html?___store=en_us
PPM is the name in the game.

[Skip Rogers]

Thank you everyone for your feedback, it has been very helpful in the investigation of this issue.

Stay tuned for updates! Thanks again, everyone.

[MeltrackzFPV]

i am able to fly now after multiply modifications within the combo of tweaking the settings on my flysky i6 and the settings in the sim.... like oen guy said earlier in the discussion change you end points to 50% for Channel 4. then u will have to adjust the rates in the sim to comp the 50% as well as trim adjustments. works to allow you to fjly until issue is fixed

[MeltrackzFPV]

Publicado originalmente por jlguerrero:

Thanks Marker, I'll keep that in mind if the team needs more information.

@bob the builder and @MeltrackzFPV sorry, but could please post a link to the exact cable you're using. And bob if you could give me the exact model name for the transmitter, it would be very helpful, please.

Thanks!

https://www.walmart.com/ip/Flysky-SM100-USB-RC-Helicopter-Airplane-Simulator-for-Flysky-FS-i6-FS-i4-FS-TH9X-FS-T6-FS-T4B-FS-GT3-FS-GT2-Remote-Controller/258245247?wmlspartner=wlpa&selectedSellerId=4801&adid=22222222227090580734&wmlspartner=wmtlabs&wl0=&wl1=g&wl2=c&wl3=204670355400&wl4=pla-332560067201&wl5=9010594&wl6=&wl7=&wl8=&wl9=pla&wl10=114227155&wl11=online&wl12=258245247&wl13=&veh=sem

[OhGeez!]

Publicado originalmente por jlguerrero:

Thanks Marker, I'll keep that in mind if the team needs more information.

@bob the builder and @MeltrackzFPV sorry, but could please post a link to the exact cable you're using. And bob if you could give me the exact model name for the transmitter, it would be very helpful, please.

Thanks!

[OhGeez!]

I just updated to 2.0.7ee6-eax and the contoller problem still exists... Whenever I try to yaw, the level resets. And, when I'm in the controller setup and I move the left stick side to side (yaw), switch A also moves.

FlySky FS-i6 connected with this:

https://www.amazon.com/gp/product/B01AAETLVY/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1