Butikssida
My Summer Car
Alla Diskussioner Skärmbilder Konst Sändningar Filmer Nyheter Guider Recensioner

My Summer Car

Butikssida
Visa statistik:
Globala prestationer
My Summer Car > General Discussions > Ämnesdetaljer
RinChanMeow 20 jun, 2017 @ 6:34
Crankshaft removal
Sorry for making another post, but I'm stuck. What parts need to be taken off to remove the crankshaft? Because I've taken pretty much everything you can without dropping the engine from the car, and yet it still doesn't let me remove it
< >
Visar 1-4 av 4 kommentarer
meesha 20 jun, 2017 @ 6:56 
Yes, you need to remove parts from both sides, i.e. timing gear and flywheel/clutch/gearbox. I don't know if the engine may fall out once you unscrew the 11mm bolt mounting the gearbox, but it is possible.
#1
RinChanMeow 20 jun, 2017 @ 7:22 
Ursprungligen skrivet av meesha:
Yes, you need to remove parts from both sides, i.e. timing gear and flywheel/clutch/gearbox. I don't know if the engine may fall out once you unscrew the 11mm bolt mounting the gearbox, but it is possible.
I've unscrewed the gearbox, gear linkage and the halfshafts, even the engine mounting bolts, and the gearbox won't go. I'm guessing the engine needs to be removed (which is slightly insane). Sucks I can't bring the engine hoist to the car. It'd be alot easier than taking the car to it
#2
meesha 20 jun, 2017 @ 7:31 
Gearbox is mounted, afair, 11 to the body, 6x6 and 1x10 to the block, 6x9 halfshafts, but there is still drive gear to be removed - 6mm? Will try to check this later today.
#3
RinChanMeow 20 jun, 2017 @ 7:46 
We've done it. The gearbox and all the gubbins under it need to come off for the crankshaft to be removed. A pain, but the engine is still in. Dispite all 3 of the engine mounts not touching anything
#4
< >
Visar 1-4 av 4 kommentarer
Per sida: 1530 50

My Summer Car > General Discussions > Ämnesdetaljer
Datum skrivet: 20 jun, 2017 @ 6:34
Inlägg: 4

Diskussionsregler och -riktlinjer