N2O not working..?

[honeybadger]

So I installed N2O for the first time after many hours of driving without, but it does not seem to work. First things first, msc wiki says, the bottle is full after buying it.. right?
Racing carburetor is installed, that N2O thingy, which sits on top of the carburetor is installed and bolted, bottle sits in the back, button is installed. Pressing the button does not change the AFR.. Anything I could have missed.

Also.. I read about many different opinions regarding the right AFR with N2O. Some say, it should be 13.1 (N2O off), others say, it should be made richer, so tuned down, because N2O makes the Ratio leaner and then it should be at about 13-14 in the green zone..?

[FlyingWaffle]

You need adjust the pressure on the tank

[honeybadger]

Already did. Tried, half, tried full... nothing

[s-d]

The bottle is not full after purchasing it, you'll have to adjust the spark timing too. My setting is lowest pressure possible (not 0) so that spark timing doesn't cause power loss when nitro is off as you don’t have to adjust it. Also watch your headgasket :p

[honeybadger]

Okay, will try it tomorrow

[BubbaNichabee]

Did you tighten the 2x5mm bolts to the racing carb and the 2x7mm bolts for the bottle holder?

[honeybadger]

Originally posted by Grrrblunder:

Did you tighten the 2x5mm bolts to the racing carb and the 2x7mm bolts for the bottle holder?

Yes I did, already doublechecked