Car won't start after rebuild

[mulkeand]

I just got done reinstalling a new crankshaft for the Satsuma. I reinstalled everything yet the engine won't even turn over. An odd note is that the electrics seem to work fine. What is the problem?

[Okefenokee]

spark plugs worn, starter worn.

[mulkeand]

Originally posted by Willy0077:

Have you re-wired the battery to the starter?

This might be it, I'll have to check.

[mulkeand]

Originally posted by Willy0077:

Have you re-wired the battery to the starter?

It appears to be wired already.

[lukeh1709]

You need to make sure that the “electrics” (condenser bolted to the side of the engine bay) are wired to main Harness and that the alternator is wired to the regulator. Those wires disappeared for me when I did the same rebuild. Also undo the do up the 5mm nut on the starter as that wire also technically detaches with engine removal and the game make not recognise it connected until you loosen and tighten it again. Hope this helps.

Ps also there seems to be a bug where if one of the battery terminals are loose, the game still lets you turn on the ignition but won’t start the engine. (Happened to me, don’t know if anyone else experienced this). The negative terminal always comes loose when removing and installing the engine so you could also check that

[mulkeand]

Originally posted by lukeh1709:

You need to make sure that the “electrics” (condenser bolted to the side of the engine bay) are wired to main Harness and that the alternator is wired to the regulator. Those wires disappeared for me when I did the same rebuild. Also undo the do up the 5mm nut on the starter as that wire also technically detaches with engine removal and the game make not recognise it connected until you loosen and tighten it again. Hope this helps.

Ps also there seems to be a bug where if one of the battery terminals are loose, the game still lets you turn on the ignition but won’t start the engine. (Happened to me, don’t know if anyone else experienced this). The negative terminal always comes loose when removing and installing the engine so you could also check that

I thought something looked off about the battery. Thanks!

[lukeh1709]

Your welcome. all working now?
[/quote]
I thought something looked off about the battery. Thanks! [/quote]

[mulkeand]

Originally posted by lukeh1709:

Your welcome. all working now?

I thought something looked off about the battery. Thanks! [/quote] [/quote]
The car is running again. Thank you!

[LongGorillaDong]

Originally posted by lukeh1709:

You need to make sure that the “electrics” (condenser bolted to the side of the engine bay) are wired to main Harness and that the alternator is wired to the regulator. Those wires disappeared for me when I did the same rebuild. Also undo the do up the 5mm nut on the starter as that wire also technically detaches with engine removal and the game make not recognise it connected until you loosen and tighten it again. Hope this helps.

"Ps also there seems to be a bug where if one of the battery terminals are loose, the game still lets you turn on the ignition but won’t start the engine. (Happened to me, don’t know if anyone else experienced this). The negative terminal always comes loose when removing and installing the engine so you could also check that

"
i have this problem, any way to fix this??