Can't remove flywheel/clutch discs

[山田太郎]

Forgot to install engine plate. Tried to remove flywheel, can't. Unscrewed the 6 screws on the flywheel AND the 6 on the clutch cover. Is this a bug?

[Toplessgun]

I think this might be, I got also other report about the clutch parts which could be related to this. Will be fixed for upcoming update :)

[山田太郎]

Originally posted by Toplessgun:

I think this might be, I got also other report about the clutch parts which could be related to this. Will be fixed for upcoming update :)

Thanks! Looking forward to it!

[Toplessgun]

I can't reproduce this :( When you unbolted both cover plate and flywheel, did you try to remove clutch plate first and then flywheel?

[Jyrsis]

I got the same problem. http://steamcommunity.com/sharedfiles/filedetails/?id=787747927 I managed to detach the pressure plate when it was inside other parts but that is the only part that I could detach. (and it probably shouldn't detach like it did. Can't put it back in obviously)

How I ended up in this situation went like so: I messed around with pressure plate and the other part and tried to attach them without clutch disc in place. (It shows you can do it but it doesn't work) then I built it properly (I assume, probably not never build any cars before :) ) with the disc and then I attached the flywheel, bolted it down and noticed that I too forgot the engine plate. I decided to try attaching the clutch pack into it anyway and if I remember it correctly I bolted it in too. Then I put the cover in place and found out that I can't detach it anymore. Didn't touch the bolts. After messing around for a while I managed to detach the pressure plate. Then I opened all bolts around there but that didn't help with the problem. One thing I noticed is that when the clutch pack is connected together but not attached to the engine it seems to have some issues as it isn't as easy to pick up as other parts. Maybe the collision doesn't work properly or something.

---

Mulla on seivi kuvan tilanteesta jos siitä on mitään iloa. Voin koittaa reprota tätä uudelleen jossain vaiheessa jos on tarvetta. En oo ihan varma tuosta kytkinpaketin kokoamisesta tosin, että menikö se just noin.

[OscarMike]

has this been fixed? i made the mistake of putting on the flywheel before the engine plate now i cant get the flywheel off. i have tried to pixel hunt everywhere but all i get is the block and crank shaft. do i need the engine plate for the car to run. i dont want to have to start all over again

[TheBaggyFunTrain]

You do.
Soz m8.

[Toplessgun]

Originally posted by oscarmike:

has this been fixed? i made the mistake of putting on the flywheel before the engine plate now i cant get the flywheel off. i have tried to pixel hunt everywhere but all i get is the block and crank shaft. do i need the engine plate for the car to run. i dont want to have to start all over again

I can't remember any more if it has been fixed. Can you send your save to support (at) amistech.com where the Flywheel is stuck?

[Tiretracker]

Originally posted by Toplessgun:

Originally posted by oscarmike:

has this been fixed? i made the mistake of putting on the flywheel before the engine plate now i cant get the flywheel off. i have tried to pixel hunt everywhere but all i get is the block and crank shaft. do i need the engine plate for the car to run. i dont want to have to start all over again

I can't remember any more if it has been fixed. Can you send your save to support (at) amistech.com where the Flywheel is stuck?

Heya. Without noticing, I made the same mistake too. Canb't seem to get the flywheel off even though the only thing holding it on is 6 6" bolts.

Would it be simpler to just make the Flywheel removable without diggging into everything else? I mean.... its totally exposed and the crankshaft is locked in place by the rest of the machinery.