安裝 Steam
登入
|
語言
簡體中文
日本語（日文）
한국어（韓文）
ไทย（泰文）
Български（保加利亞文）
Čeština（捷克文）
Dansk（丹麥文）
Deutsch（德文）
English（英文）
Español - España（西班牙文 - 西班牙）
Español - Latinoamérica（西班牙文 - 拉丁美洲）
Ελληνικά（希臘文）
Français（法文）
Italiano（義大利文）
Bahasa Indonesia（印尼語）
Magyar（匈牙利文）
Nederlands（荷蘭文）
Norsk（挪威文）
Polski（波蘭文）
Português（葡萄牙文 - 葡萄牙）
Português - Brasil（葡萄牙文 - 巴西）
Română（羅馬尼亞文）
Русский（俄文）
Suomi（芬蘭文）
Svenska（瑞典文）
Türkçe（土耳其文）
tiếng Việt（越南文）
Українська（烏克蘭文）
回報翻譯問題
討論區規矩與守則
檢舉此篇文章
You can also do it like this:
http://steamcommunity.com/sharedfiles/filedetails/?id=1277779184
All 3 stack inserters need to be set to overrride stack size to a divisor of 40 (like 4,5,8,10)
The one going back into the machine from the box is enabled if U235 = the same value as the stack override. The yellow one enabled if U235 = 1.
After the proccessing is done, the U235 gets moved around one stack at a time, at last there's one piece left, and that'll be put onto the belt.
Let's try again, a basic non-resetting counter: Connect a belt (or inserter) to a decider combinator, set it to read, pulse. Connect the output of the combinator to it's input. Set the decider to x > 0 , output : x,1
The same thing, but with " x < 40 " (for example) resets as soon as 40 things went by. I didn't manage to make something useful with that though. It seems like the reset happens instantly and I can't get anything to trigger on exactly that amount.
Without it, a Kovarex centrifuge takes in 80 U235. When it starts working, 40 disappear from the input storage, and it can take in another 40. So each centrifuge can tie up up to 80 U235 that could already be used for something else. You could just ignore it, but considering the time it takes to get that stuff, it's worth it to do something about this.
Example: https://i.imgur.com/05uVyPL.png
The 4x stack filter inserters are set to stack size =10, plus 1x filter inserter set to stack size =1. Result: 40 are recycled back in automagically, 1 is output. Only uses the minimum of 40 catalyst too.
The link is actually helpfull so Thanks. If you can't see any sense to this, it's gonna be usefull for kovarex. You'll get to this point later in the game.
centrifuge
out in in
>>>>>>>>>>
Out inserter needs to be filter, or stack-filter.
This way the out inserter pulls out all uranium that is output by kovarex, and the other two make sure no uranium leaves the belt unless the centrifuge has enough to start the next process. Do keep in mind this keeps a buffer in the centrifuge, but after that buffer is filled (is like 30 u235 if im not mistaken) then the u35 is allowed to overflow because the in inserters wont pull any more uranium. You have to make sure you handle the u238 above the centrifuge, on another belt.
The buffer is 80. 2 times the cost of one product, same as in every assembler.
I thought the problem was using only 40 U235 in each centrifuge ?
Cheap build and sometimes doesn't work well
It would be useful to start off, but once you have an excess amount of U-235and can spare the extra 40-80 in a centrifuge, it doesn't hurt anything to take the lazy way out and only capture the excess U235.
I do babysit my centrifuges to get them all running, but once they all are, I don't care if they build up their reserves for a bit. Maybe takes a teeny bit longer before I get any U235 out of it automatically, but the clean look for a zero-wire, zero-circuit-condition centrifuge setup is beautiful:
http://steamcommunity.com/sharedfiles/filedetails/?id=921557763