Conveyor belts

[Phanton]

Ok so, i saw someone in a youtube video, in darkrp who made a conveyor belt (glitch) with the precision tool, i don't know how to make them so can anyone tell me?

[Sigfig]

Can you send the video?

[Phanton]

Originally posted by Mr.fănŧâsŧic:

Can you send the video?

sure, here it is https://www.youtube.com/watch?v=hO3jzinZ2_k

[Sigfig]

My only guess is it's a super ice physical property on a slight angle

[MLGTASTIC]

It is super ice on a slight angle , you can clearly see the prop going under the small wall by a bit

[꧁Jay꧂]

Originally posted by MLGTASTIC:

It is super ice on a slight angle , you can clearly see the prop going under the small wall by a bit

I've tested in Sandbox with supericed props on larger angles (2-3 degrees) and it doesn't slide quite like that, in the description the guy claimed it was a 'glitch' so I'm not sure how he does it. I had to tilt my supericed plate at 5 degrees to get it to slide remotely like that, unless if you can physprop gun shipment crates I am not sure how they did it in that video either.

[MLGTASTIC]

Originally posted by Soarin':

Originally posted by MLGTASTIC:

It is super ice on a slight angle , you can clearly see the prop going under the small wall by a bit

I've tested in Sandbox with supericed props on larger angles (2-3 degrees) and it doesn't slide quite like that, in the description the guy claimed it was a 'glitch' so I'm not sure how he does it. I had to tilt my supericed plate at 5 degrees to get it to slide remotely like that, unless if you can physprop gun shipment crates I am not sure how they did it in that video either.

maybe he used a wire grabbeR?

[Phanton]

Originally posted by MLGTASTIC:

Originally posted by Soarin':

I've tested in Sandbox with supericed props on larger angles (2-3 degrees) and it doesn't slide quite like that, in the description the guy claimed it was a 'glitch' so I'm not sure how he does it. I had to tilt my supericed plate at 5 degrees to get it to slide remotely like that, unless if you can physprop gun shipment crates I am not sure how they did it in that video either.

maybe he used a wire grabbeR?

impossible, if you look more, there isn't the wiremod in the top right corner of the screen.

[Dougyy]

I think i did it but it needs like A lot like ALOT of precision to do it
so what you do is you push like about 1 tile into the wall and then put something on the other end of the conveyor belt about 0.5 tile away from the conveyor belt and then you unfreeze the conveyor belt and then things should glide on it

[Dougyy]

also i forgot to say that you need to precision the prop thats stopping the conveyor or else it wont work dont precision the prop into it tho

[Phanton]

Originally posted by Dunald Dook:

I think i did it but it needs like A lot like ALOT of precision to do it
so what you do is you push like about 1 tile into the wall and then put something on the other end of the conveyor belt about 0.5 tile away from the conveyor belt and then you unfreeze the conveyor belt and then things should glide on it

i did try to do the glitch, and all you have to do is basically do what you said, you put a long thin prop (that's how i've done it), push it into the ground, put a prop on one end and push it into the conveyor belt. I did something different however, i spawned a 1-1 cube and welded it to the conveyor belt, after that i put a prop on the other side of the conveyorbelt to make the prop stop gliding, and i got the conveyor belt, so thanks!

[Pidgen]

Originally posted by ǝᴉʞOOƆ:

Originally posted by Dunald Dook:

I think i did it but it needs like A lot like ALOT of precision to do it
so what you do is you push like about 1 tile into the wall and then put something on the other end of the conveyor belt about 0.5 tile away from the conveyor belt and then you unfreeze the conveyor belt and then things should glide on it

i did try to do the glitch, and all you have to do is basically do what you said, you put a long thin prop (that's how i've done it), push it into the ground, put a prop on one end and push it into the conveyor belt. I did something different however, i spawned a 1-1 cube and welded it to the conveyor belt, after that i put a prop on the other side of the conveyorbelt to make the prop stop gliding, and i got the conveyor belt, so thanks!

I am having trouble understanding all of this, and I have a feeling others are as well. Do you think one of you may make a short video on the creation? Thanks

[Liam Johnson]

Watching a waiting.........

[n_dzhuzganov]

Look here https://youtu.be/zoEDmItUWqc

[Soulkiller]

How you make the conveyor belt in most servers i've tried it in is you get a plate the size that u need and you precision it into the wall about 2 or 3 squares of the plate and weld it to another prop that aint touching or inside of it then physgun the prop in the wall to unfreeze it