LEGO® Jurassic World

LEGO® Jurassic World

View Stats:
Lone Tiger Sep 18, 2015 @ 11:49pm
T. Rex chase glitch
I cannot get the last three minikits because the last dilophosaur minikit, the T. Rex catches up with me and just circles my car and doesn't roar. Same thing with the san deigo chase, the T.rex rarely roars and i cant seem to get the other minikit. Any ideas?
< >
Showing 1-15 of 17 comments
markrevell Sep 19, 2015 @ 7:33am 
Are you swapping characters? You need to be the driver to get certain achievements, and others you need to do as the back-seat character who can aim at the required items and throw.
Or are you having some other problem?
Good Luck :)
wolverinetodd Dec 4, 2015 @ 11:29pm 
I'm having the same problem with San Diego Streets. I just need two remainiing kits to finish game and they're both on San Diego Streets. The problem I'm running into is that the car is too slow and the T-Rex is too close to the car during the chase to even be able to roar, thus no target to hit with chicken legs to its mouth. In fact most of the time it is running right on top of the car. Is there a gas pedal button to push to actually outrun the T-Rex?

I've seen on YouTube that there's even a tanker truck that's supposed to slam into the T-Rex, causing a huge explosion. But because the T-Rex is running too close to my car, the tanker truck never shows up. There are two guys carrying a sheet of glass across the street that I'm supposed to crash into to collect a kit, but because the "timing" is off with my car running slower than the T-Rex, the two guys never show up to cross the road.

This "car too slow/T-Rex too fast" is an unfortunate glitch and thankfully appears to be the only one I've experienced. However, it is preventing me from completing the game. Seriously, these two kits are all I need to have all 200 kits, thus giving me my last gold brick to get 100% on the game. Any suggestions would be appreciated. BTW, I've got my game set on the lowest settings possible.
wolverinetodd Dec 6, 2015 @ 8:38am 
I'm stuck at 99.7% because of the "car too slow/T-Rex too fast" glitch in San Diego Streets (as mentioned above), so I decided to start a new game. Ironically in Tyrannosaurus Chase this time around my Jurassic Park Jeep starts to outrun the T-Rex right after the T-Rex takes the shortcut through the trees and breaks out between the two breakable Lego Trees. My jeep outruns it to the point that the T-Rex isn't behind my jeep at all, thus preventing me from throwing flares into its mouth.

These two chase glitches truly need to be fixed through some sort of downloadable patch or something that keeps the T-Rex and the vehicle it's chasing at a set distance at all times.
Lone Tiger Jan 10, 2016 @ 9:40am 
I agree, usually in my game the T. Rexes open their mouth once (rarely) then they quickly catch up with my car until the level ends.
rledonne1982 Feb 11, 2016 @ 10:05am 
I've got exactly the same problem. Has anyone found a fix for this? I'm thinking maybe I should do it in story mode, but don't want to bother if the problem is going to still be there.

I've only got about 5% of the game remaining, so this thing is getting on my nerves.
rledonne1982 Feb 12, 2016 @ 12:27pm 
If anyone still has this problem, I seem to have solved it by going into the effects settings and setting everything to 'off' and shadow settings to 'medium'.

I'm not sure which of the options made a difference, but hopefully doing that will work for others.
wolverinetodd Feb 28, 2016 @ 10:27am 
Originally posted by rledonne1982:
If anyone still has this problem, I seem to have solved it by going into the effects settings and setting everything to 'off' and shadow settings to 'medium'.

I'm not sure which of the options made a difference, but hopefully doing that will work for others.

I think all my settings in EFFECTS are set to OFF or LOW, but I'll double-check and try this. Otherwise I may have to consider your first idea and try to get that Minikit out of the T-Rex's mouth in Story Mode.

As it stands this is the only Minikit I lack and thus I'm short one Gold Brick from being 100%.
BushwalkerSP Feb 28, 2016 @ 1:50pm 
Have you tried it with V-sync switched on?
wolverinetodd Mar 8, 2016 @ 10:50am 
Originally posted by BushwalkerSP:
Have you tried it with V-sync switched on?

I'll try that too because so far nothing has worked.
wolverinetodd Mar 9, 2016 @ 6:51pm 
Originally posted by wolverinetodd:
Originally posted by BushwalkerSP:
Have you tried it with V-sync switched on?

I'll try that too because so far nothing has worked.

That didn't work either. I've had all settings set to LOW or OFF and all settings set to HIGH or ON and I'm still unable to "outrun" the T-Rex in San DIego Streets. Ian's car is either too slow compared to the T-Rex, the T-Rex is just too fast for Ian's car, or a combination of both. Thus the T-Rex is just too close to Ian's car during the entire chase that it won't roar so I can throw chicken legs into its mouth. Every other try I might get lucky in getting one chicken leg in because the T-Rex goes wide to the side and circles back, putting enough distance between it and the car so it can roar, but that usually only happens once.

It's becoming an absolute frustrating situation because that kit from the T-Rex's mouth is the very last kit I need, thus getting me my very last gold brick, so I can get 100%. This glitch needs to seriously be overhauled STAT!!!!
markrevell Mar 10, 2016 @ 8:49am 
Originally posted by wolverinetodd:
Originally posted by wolverinetodd:
I'll try that too because so far nothing has worked.

That didn't work either. I've had all settings set to LOW or OFF and all settings set to HIGH or ON and I'm still unable to "outrun" the T-Rex in San DIego Streets. Ian's car is either too slow compared to the T-Rex, the T-Rex is just too fast for Ian's car, or a combination of both. Thus the T-Rex is just too close to Ian's car during the entire chase that it won't roar so I can throw chicken legs into its mouth. Every other try I might get lucky in getting one chicken leg in because the T-Rex goes wide to the side and circles back, putting enough distance between it and the car so it can roar, but that usually only happens once.

It's becoming an absolute frustrating situation because that kit from the T-Rex's mouth is the very last kit I need, thus getting me my very last gold brick, so I can get 100%. This glitch needs to seriously be overhauled STAT!!!!

Are you turning off all your Extras (multipliers etc.) aswell as having all Settings and Options low/off? I've had a few glitches where this has made a difference.
Sorry if this is something you've already tried.
Hope you find your answer :)
wolverinetodd Mar 11, 2016 @ 12:31pm 
Originally posted by markrevell:
Originally posted by wolverinetodd:

That didn't work either. I've had all settings set to LOW or OFF and all settings set to HIGH or ON and I'm still unable to "outrun" the T-Rex in San DIego Streets. Ian's car is either too slow compared to the T-Rex, the T-Rex is just too fast for Ian's car, or a combination of both. Thus the T-Rex is just too close to Ian's car during the entire chase that it won't roar so I can throw chicken legs into its mouth. Every other try I might get lucky in getting one chicken leg in because the T-Rex goes wide to the side and circles back, putting enough distance between it and the car so it can roar, but that usually only happens once.

It's becoming an absolute frustrating situation because that kit from the T-Rex's mouth is the very last kit I need, thus getting me my very last gold brick, so I can get 100%. This glitch needs to seriously be overhauled STAT!!!!

Are you turning off all your Extras (multipliers etc.) aswell as having all Settings and Options low/off? I've had a few glitches where this has made a difference.
Sorry if this is something you've already tried.
Hope you find your answer :)

Nope, I haven't tried turning off all my Extras. I'm at the end of my rope with this one unattainable kit that I'll just about try anything right now. I've been tempted in just keying in a cheat code to get that one kit, but not sure how it will affect my Achievement. In other words, if I cheat will my Completion Achievements, etc. be withheld?

I'll try turning off all my Extras first and see what that gets me.
wolverinetodd Mar 16, 2016 @ 11:19am 
Originally posted by wolverinetodd:
Originally posted by markrevell:

Are you turning off all your Extras (multipliers etc.) as well as having all Settings and Options low/off? I've had a few glitches where this has made a difference.
Sorry if this is something you've already tried.
Hope you find your answer :)

Nope, I haven't tried turning off all my Extras. I'm at the end of my rope with this one unattainable kit that I'll just about try anything right now. I've been tempted in just keying in a cheat code to get that one kit, but not sure how it will affect my Achievement. In other words, if I cheat will my Completion Achievements, etc. be withheld?

I'll try turning off all my Extras first and see what that gets me.

Well turning off all my Extras, with V-Sync on and then off, all Effect settings Low or Off as well as High and On still hasn't gotten me any closer to that Minikit. My sanity is in jeopardy because of this glitch.

I really hope that if a patch is being created, I hope it includes fixing this problem. As it stands, my next option is to key in a cheat code.
markrevell Mar 16, 2016 @ 11:52am 
Originally posted by wolverinetodd:
Originally posted by wolverinetodd:

Nope, I haven't tried turning off all my Extras. I'm at the end of my rope with this one unattainable kit that I'll just about try anything right now. I've been tempted in just keying in a cheat code to get that one kit, but not sure how it will affect my Achievement. In other words, if I cheat will my Completion Achievements, etc. be withheld?

I'll try turning off all my Extras first and see what that gets me.

Well turning off all my Extras, with V-Sync on and then off, all Effect settings Low or Off as well as High and On still hasn't gotten me any closer to that Minikit. My sanity is in jeopardy because of this glitch.

I really hope that if a patch is being created, I hope it includes fixing this problem. As it stands, my next option is to key in a cheat code.

You could try changing the programs Compatability, running on older settings, in the 'exe' file Properties. I've just changed them for HP1-4 to give me smooth graphics on load-up screens.
Best of luck :)
lonkyD Mar 22, 2016 @ 6:18am 
so sad
< >
Showing 1-15 of 17 comments
Per page: 1530 50