Turntable problems

[cornel_mh2012]

When move a loco on a turntable without rotate turntable before, all is ok (before movement signal is green or yellow) but, if rotate turntable then aligne it to the loco track i cant move on turntable because the signal remain red with message : "Line terminates or is closed" I have tried various combinations of locos, turntables, signals - no change.

Can someone help me please ?

P.S. Turntable is complete (with its track stub) and is placed in the middle of a track complete and full signaled.

P.S. I have a route inported "Example turntables AJS_route_TaneSP3" (kuid:490249:100055) working perfect but if, in scenario, rotate turntable and realigne it, before loco pass the signal, the same problem : "Line terminates or is closed".

[ZecRail]

Hi Cornel_mh2012
Do you have a signal attached to the turntable itself? I don't think this has been actively tested, so may cause unexpected issues after the turntable has turned as the signal may not immediately update.

I would recommend that you try removing the signal from the turntable, and see if you are now able to drive on/off the turntable.

[cornel_mh2012]

You have right. After some tests I have found (!?) the problem. Signal is not update. I have solved with trigger and set signal to automatic. Thanks for your help