Marvel Rivals

Marvel Rivals

Ver estadísticas:
taqeladragn 5 DIC 2024 a las 16:38
help. mouse drift
I'm using MKB. In game, but not menus, my cursor drifts up and to the right. is this happening to anyone else, is there a fix??
< >
Mostrando 16-30 de 38 comentarios
Blundha 7 DIC 2024 a las 10:11 
Thought it would work for me but it doesn't. Using a Varmilo keyboard and Ninjutso Sora 4k mouse. Nothing works, never encountered this in the Alpha or Beta.
Perjoss 7 DIC 2024 a las 17:50 
had this issue tonight, unplugging my controller fixed it. The controller deadzones are likely set a little lower than most other games, so it picks up some drift it seems
Kinshou 7 DIC 2024 a las 19:45 
Publicado originalmente por Robmo:

Nothing i try works for my tartarus, OTHER THAN ALT TABBING EVERYTIME I DIE

It is a bit inelegant, but for Rivals I was able to just turn the controller horizontal/vertical sensitivity to 50 and change the aim sensitivity curve type to Dual-Zone S-Curve. (I think I also maxed out the Minimum/Max input deadzones.)

It was enough to fix the Tartarus causing aim drift.

Chances are, you can probably dig up the config file and toggle a bit to disable controller support to fix the issue also.

Anyways, hope that works for you also.
EpiGuy 9 DIC 2024 a las 13:14 
Never seen an issue like that, it's also happening to me
sgt squirt 10 DIC 2024 a las 8:09 
Publicado originalmente por taqeladragn:
Publicado originalmente por SANTO REŇ͢҉̧͔͖̙̼̼̲:
If you happen to use Tartarus Keypad this might help you.

What worked for me was going to device manager and going down to Xbox 360 peripherals drop down to xbox 360 controller for windows and disable the device in its properties under the driver tab.

I've had the same exact problem with Helldivers 2 months ago.
i do not have my tartarus anymore, BUT i do use a huntsman v2 analogue which uses 360 drivers. will get back to you!!! thanks for the tip!

EDIT: Couldn't figure it out with that keyboard. Switching to a steel series apex pro tkl fixed the problem. Its gotta be the 360 drivers. does anyone know how i can fix this and use my huntsman?

i fixed it today if you go to ur device settings in windows and disable any controllers connected mine was at the very bottom listed as "HID compliant controller" it should fix the issue I;m using a razer huntsman v3
Última edición por sgt squirt; 10 DIC 2024 a las 8:09
Zoomalude 10 DIC 2024 a las 19:30 
Publicado originalmente por Kinshou:
Publicado originalmente por Robmo:

Nothing i try works for my tartarus, OTHER THAN ALT TABBING EVERYTIME I DIE

It is a bit inelegant, but for Rivals I was able to just turn the controller horizontal/vertical sensitivity to 50 and change the aim sensitivity curve type to Dual-Zone S-Curve. (I think I also maxed out the Minimum/Max input deadzones.)

It was enough to fix the Tartarus causing aim drift.

Chances are, you can probably dig up the config file and toggle a bit to disable controller support to fix the issue also.

Anyways, hope that works for you also.

This worked for me, thanks!
CruxinN 11 DIC 2024 a las 14:05 
Publicado originalmente por Likecyber:
I believe this is caused by any driver that tries to emulate controller actions.

This can be fixed by enabling Steam Input in the Controller settings.

Here is how to do it in detail:

Make sure to exit the game if you have it running now.
Then go to your Steam Library.
Right-click at Marvel Rivals -> Properties... -> Controller
Switch from "Use default settings" to "Enable Steam Input".

Now you can enter the game and the problem should be fixed.

This method works for other games as well.
Strinova can also use this method to fix the same issue.


This didn't fix the issue for me at first, but I went into the 'Controller Configurator' in the Marvel Rivals steam controller settings -> 'Edit Layout' -> 'Joysticks' -> change left and right joystick behavior to 'Joystick Mouse' from the selection menu. Hope this helps. Fixed the crosshair drift for me. I'm also MKB player btw.
jstRPG 12 DIC 2024 a las 3:37 
Publicado originalmente por Fivio:
My mouse won’t stay on my main monitor when I’m playing and makes me click on my second one idk what to do
I fix it after trying alot of methods, if you have dual monitor try this switching to pc monitor only from P+windows, my problem was because my mouse was going to other monitor while gaming so I had to use single monitor mode until they fix it I hope this help
Última edición por jstRPG; 12 DIC 2024 a las 3:38
Tsi Aileron 12 DIC 2024 a las 3:40 
Dual monitors, Logitech kb+mouse, with a PS5 controller plugged in. I've never experienced this issue before. Weird!
jstRPG 14 DIC 2024 a las 3:01 
finally I found the reason for me it is that I'm using a program to make my mouse smoother between monitors (Little big mouse) check if you are using something like that, there is another solution you can try I didn't need to (control panel>change User control setting under security and maintenance>make sure it's on never notify and click ok)
Reasons 22 DIC 2024 a las 16:57 
Publicado originalmente por taqeladragn:
I'm using MKB. In game, but not menus, my cursor drifts up and to the right. is this happening to anyone else, is there a fix??
the game is detecting controller input. you can tell by adjusting controller sense. even if you dont have a controller plugged in it will do it. you need to disable all controller inputs in steam.
Vehxy 25 DIC 2024 a las 14:50 
this happens to me too i unplug my mouse it still drifts up i unplug my keyboard and it stops idk why or how but the keyboard is causing the drift
Perjoss 25 DIC 2024 a las 16:45 
Publicado originalmente por Vehxy:
this happens to me too i unplug my mouse it still drifts up i unplug my keyboard and it stops idk why or how but the keyboard is causing the drift

if you have a controller plugged in, try unplugging it while you're playing this game, this worked for me. In my case the drift was happening because the game has pretty small dead zones for the thumb sticks and if the stick are not perfectly centered it will pick up that input
Última edición por Perjoss; 25 DIC 2024 a las 16:45
zimba7768 29 DIC 2024 a las 8:22 
Publicado originalmente por Likecyber:
I believe this is caused by any driver that tries to emulate controller actions.

This can be fixed by enabling Steam Input in the Controller settings.

Here is how to do it in detail:

Make sure to exit the game if you have it running now.
Then go to your Steam Library.
Right-click at Marvel Rivals -> Properties... -> Controller
Switch from "Use default settings" to "Enable Steam Input".

Now you can enter the game and the problem should be fixed.

This method works for other games as well.
Strinova can also use this method to fix the same issue.


This worked for me
Publicado originalmente por taqeladragn:
I'm using MKB. In game, but not menus, my cursor drifts up and to the right. is this happening to anyone else, is there a fix??
Go to bluetooth devices and remove what might be called HID-Controller. its a glitch with razor keyboards
< >
Mostrando 16-30 de 38 comentarios
Por página: 1530 50

Publicado el: 5 DIC 2024 a las 16:38
Mensajes: 38