Logitech G920 not working with ATS

[Disco Spider]

Hey Guys! I recently purchased a Logitech G920 wheel to use in this game as well as Forza. In Forza it worked great out of the box with no issues. However on ATS the following this are happening to me when I try to use it.

-The cursor goes to the bottom of the screen unless I press on the gas pedal which raises it.
-When I press my gas breaks in the truck it looks around (like its acting as the mouse)
-The steering wheel does turn the wheel however it doesn't go back to the middle when the G920 swings back

I've tried:
Plugging in the wheel directly to the computer
Plugging the wheel in before I start ATS
Restarting the computer before launching ATS with wheel plugged in
Leaving G Hub open before launching game.

It seems like it's something with the button layout but when I tried to remap in game it wasn't even registering that I was pressing on the pedals or anything.

If anyone has any suggestions let me know I would love to get this working in game!

Thanks!

[Goose_Few]

https://steamcommunity.com/app/227300/discussions/0/4070650515254574075/

[tjmanse69]

My partner has the same steering wheel and she wants to know if you done everything in the game play settings in the game and also do advance setup

[Disco Spider]

Originally posted by tjoy69:

My partner has the same steering wheel and she wants to know if you done everything in the game play settings in the game and also do advance setup

Well I went in and tried to reassign buttons to the wheel but nothing happens when I press the buttons. As far as advance setup I didn't see anything that said that in settings

[AyMazingATS]

Try this:

Right click ATS in your Library. Set "Steam Input Per-Game Setting" to 'forced off'. Then try setting them again in Keys & Buttons after this setting is turned off.

[AyMazingATS]

You have the mouse assigned to the wheel if it moving down the screen without touching the mouse.

Exit the game and relaunch the game. Do not click on Drive.

Click Options >> Controls.

Scroll down until you see alternate mouse cursor control. Click on Reset.

[Disco Spider]

Originally posted by AyMazingATS:

You have the mouse assigned to the wheel if it moving down the screen without touching the mouse.

Exit the game and relaunch the game. Do not click on Drive.

Click Options >> Controls.

Scroll down until you see alternate mouse cursor control. Click on Reset.

That worked! The only thing that's not working now is the gas is like always pressed down in game even when I’m not pressing it. In the controls settings the bar is all the way orange no matter what

[beerddlovliness]

Originally posted by Shark Park:

Originally posted by AyMazingATS:

You have the mouse assigned to the wheel if it moving down the screen without touching the mouse.

Exit the game and relaunch the game. Do not click on Drive.

Click Options >> Controls.

Scroll down until you see alternate mouse cursor control. Click on Reset.

That worked! The only thing that's not working now is the gas is like always pressed down in game even when I’m not pressing it. In the controls settings the bar is all the way orange no matter what

Did you try setting the accelerator ingame and break to inverted? that will probably fix the issue

[rush]

Originally posted by beerddlovliness:

Originally posted by Shark Park:

That worked! The only thing that's not working now is the gas is like always pressed down in game even when I’m not pressing it. In the controls settings the bar is all the way orange no matter what

Did you try setting the accelerator ingame and break to inverted? that will probably fix the issue

My controls are inverted, steam input is disabled, and the Logitech G Hub is connected. My gas and break pedals don't seem to be working, but my clutch, arrow keys, and wheel all seem to work just fine. I don't know what else I can do.

[rush]

Originally posted by rush:

Originally posted by beerddlovliness:

Did you try setting the accelerator ingame and break to inverted? that will probably fix the issue

My controls are inverted, steam input is disabled, and the Logitech G Hub is connected. My gas and break pedals don't seem to be working, but my clutch, arrow keys, and wheel all seem to work just fine. I don't know what else I can do.

Now, the clutch is my gas pedal and I have no way of stopping the vehicle. Maybe I just don't know how to drive a truck but I'm pretty sure something is wrong.

[AyMazingATS]

Originally posted by rush:

Originally posted by rush:

My controls are inverted, steam input is disabled, and the Logitech G Hub is connected. My gas and break pedals don't seem to be working, but my clutch, arrow keys, and wheel all seem to work just fine. I don't know what else I can do.

Now, the clutch is my gas pedal and I have no way of stopping the vehicle. Maybe I just don't know how to drive a truck but I'm pretty sure something is wrong.

Sounds like you need to go through the input wizard in Options >> Controls.

[greg]

I am downloading another drive sim to figure out if its ATS or the Logitech 920. I've tried everything. Sometimes Clutch is gas and gas is brake. Nuts! Whats crazy is that I've had it running beautifully a few times.

[INSTG8R™]

Originally posted by AyMazingATS:

Originally posted by rush:

Now, the clutch is my gas pedal and I have no way of stopping the vehicle. Maybe I just don't know how to drive a truck but I'm pretty sure something is wrong.

Sounds like you need to go through the input wizard in Options >> Controls.

This is your answer. I have a 920 as well no issues, Running the wizard will let you assign your axis properly by default it assumes "split pedals" so the Brake will be "on" and unassigned. Once you have properly assigned Gas, Brake, and Clutch they should all be inverted

[_KC76_]

Also, you could try using the Logitech Gaming Software instead of GHUB .. some people report that GHUB does not play well with ATS/ETS2, others say its fine. I run the Logitech Gaming Software with my G29, and have had no issues.

[INSTG8R™]

Originally posted by KingConrail:

Also, you could try using the Logitech Gaming Software instead of GHUB .. some people report that GHUB does not play well with ATS/ETS2, others say its fine. I run the Logitech Gaming Software with my G29, and have had no issues.

Unfortunately it can't use LGS take it from someone that is currently using both

[Wolfpig]

Originally posted by KingConrail:

Also, you could try using the Logitech Gaming Software instead of GHUB .

He could try.....but it wont work, as the lgs software was outdated/discontinued at the time of the g92x release (aka, it does not support that wheel)