S18-18 Speed Truck SIM Shifter MOD for G29 Shifter Logitech G920 G27 ETS2 & ATS

[Bramage]

Anyone used this? Opinions, thoughts? Cheers!

https://www.amazon.ca/dp/B07P7C63F7/?coliid=I3TZJSAU1632L5&colid=3467KSWIXU458&psc=1&ref_=lv_ov_lig_dp_it

[Cargran YT]

Looks interesting.
I have the Logitech Driving Force Shifter for the G29 and G920. I enjoy it quite a lot, adds to the realism.
That product is interesting, basically a modification for the shifter?

[Lazarus {FATE}]

Never used it but it should do the same as the more expensive knobs.

It looks interesting and I almost picked it up but I just ordered the man usb skrs shifter knob from amazon.ca simply due to the fact that I like the sim aspect.

[Foxman]

Originally posted by Cargran YT:

Looks interesting.
I have the Logitech Driving Force Shifter for the G29 and G920. I enjoy it quite a lot, adds to the realism.
That product is interesting, basically a modification for the shifter?

Yes, its a lower cost version of the larger, more realistic shifter knobs available that add range and split switches with some also having a quick switch for jake brake.

APlusB Software, Almar and Southern Trucker Gaming are the primary 3 vendors of the more expensive options.

[bloody death]

yer i have that mate it is great

[Bramage]

I’m a budget so the more expensive ones are a no go.

[~{DCMT}~ComaWhite12~]

Originally posted by Bramage:

Anyone used this? Opinions, thoughts? Cheers!

https://www.amazon.ca/dp/B07P7C63F7/?coliid=I3TZJSAU1632L5&colid=3467KSWIXU458&psc=1&ref_=lv_ov_lig_dp_it

Yep.
I bought and used one for around a month, before I ordered an Eaton Fuller knob, and a few switches, and built my own SKRS.
And I used the board that this one came with to run the SKRS.

[~{DCMT}~ComaWhite12~]

Originally posted by Foxman:

Originally posted by Cargran YT:

Looks interesting.
I have the Logitech Driving Force Shifter for the G29 and G920. I enjoy it quite a lot, adds to the realism.
That product is interesting, basically a modification for the shifter?

Yes, its a lower cost version of the larger, more realistic shifter knobs available that add range and split switches with some also having a quick switch for jake brake.

APlusB Software, Almar and Southern Trucker Gaming are the primary 3 vendors of the more expensive options.

Honestly, between picking up the micro switches, EATON knob, and wire, I was all in around $50-$60 total to make the exact same model they sell.
I won't say they're ripping people off, because time IS valuable, but if you're somewhat handy, you can make it for under 1/2 the cost.
https://i.imgur.com/xgjFaYg.jpg

[Foxman]

Absolutely - if you've got the DIY skills then it's well worth while making one yourself.

[Gearjammer]

I would say to all. Read the review on some of theses addon's. Some are not for this sim game. I almost purchased the wrong knob. The one I looked at was for IRL truck. Just be careful on amazon.

[Lazarus {FATE}]

Originally posted by Gearjammer:

I would say to all. Read the review on some of theses addon's. Some are not for this sim game. I almost purchased the wrong knob. The one I looked at was for IRL truck. Just be careful on amazon.

Well... If you type usb skrs shifter in google it won't take you to the stock truck knobs.

But, yeah! You do need to read the description. I do hope most people do before clicking buy

[Bramage]

Ok, the consensus is this item is a good low cost add-on? I have no time nor interest building my own.

[bloody death]

yes mate i have this and have no problem works on both ats and euro truck 2 and you wont waste you money its great

[Bramage]

Cheers brother. I will order it.

[Jin666]

Originally posted by Gearjammer:

I would say to all. Read the review on some of theses addon's. Some are not for this sim game. I almost purchased the wrong knob. The one I looked at was for IRL truck. Just be careful on amazon.

You can build your own D.I.Y with combination of any IRL Eaton Fuller 18speed truck gear knob, USB joystick and some open system micro switch encoder knob just as I did with mine..very easy and straight forward

[Buck Rogers]

Originally posted by ~{DCMT}~ComaWhite12~:

Originally posted by Foxman:

Yes, its a lower cost version of the larger, more realistic shifter knobs available that add range and split switches with some also having a quick switch for jake brake.

APlusB Software, Almar and Southern Trucker Gaming are the primary 3 vendors of the more expensive options.

Honestly, between picking up the micro switches, EATON knob, and wire, I was all in around $50-$60 total to make the exact same model they sell.
I won't say they're ripping people off, because time IS valuable, but if you're somewhat handy, you can make it for under 1/2 the cost.
https://i.imgur.com/xgjFaYg.jpg

---------------------------------------------------------------------------------------------------------------------------------
Same here, made my own. Shipping & parts was a little under 62 Euro.

https://www.amazon.com/gp/product/B07DD6FS9M/

https://www.amazon.com/gp/product/B06XCP8R5F/

https://www.amazon.com/gp/product/B00KLDQ0BO/

https://www.amazon.com/gp/product/B076P63V4T/

Very easy to build, It's plug & play.