737 Zibo - Nosewheel Axis

[Metallic]

Before setting out for a joystick and a setup for xp11, as bad as it sounds I'm stuck with a mouse. I'm having issues using the mouse to control the steering wheel on the tarmac.

The settings is set to 'Roll' on zibo tablet so if I turn the yoke, the steering wheel respond. For some reason, it's decided to not respond anymore... for some strange reason. Please help..

[opjose]

You have to activate TILLER stearing for the plane you are flying.

On some planes you can click on the center of the tiller wheel to make it temporarily work with your rudder.

[Metallic]

Originally posted by opjose:

You have to activate TILLER stearing for the plane you are flying.

On some planes you can click on the center of the tiller wheel to make it temporarily work with your rudder.

I've attempted to click the center of the wheel and nothing happened. Not sure how to activate TILLER for steering, is it in settings? Cockpit?

[Barro Roan]

There is no button to activate the tiller on the zibo.

The tiller is setup up through the tablet, my guess is you proberly reloaded/changed aircraft or exited x plane and didn't save the settings in the tablet.

[opjose]

Originally posted by Xяoss:

I've attempted to click the center of the wheel and nothing happened. Not sure how to activate TILLER for steering, is it in settings? Cockpit?

I don't know about Zibo since I use a dedicated tiller axis.

But it varies from plane to plane just like in the real world.

FYI: The "tiller" is not the plane's control yoke. It is a small half wheel often close to the window of the plane.

Wiki entry:

"Most large, transport category airplanes use a device known as a tiller to steer the airplane while taxiing. This usually takes the form of a small steering wheel or lever in the cockpit, often one for the pilot and one for the co-pilot. However, they differ from the tiller on a ship. Rather than move the rudder, the tiller on an airplane steers by turning the nose wheel, and the tiller is moved in the direction of the turn, rather than opposite the turn as on a ship. "

[Metallic]

Nothing has any impact even after resetting it. :<

[Barro Roan]

Originally posted by Xяoss:

Nothing has any impact even after resetting it. :<

Have you tried re-installing the zibo mod.

I just checked my zibo and the nose wheel steering works fine with all the settings

[Metallic]

Ugh... I guess its the last thing to do - I've constantly reinstalled zibo because it was stuffed xd - I'll check. Thanks!

[Magneto]

There's a setting in the Zibo pad (on your left) that will change the nosewheel steering. Click the setting to Yaw, and you can steer with the rudder.

It's under "Settings & Features" > "Hardware Configuration" ...2nd line down, click Yaw (or your desired preference...)

..Hope that helps

[Metallic]

Unfortunately, I’ve tried that but it still won’t work.. I will reinstall the mod shortly and if it dosen’t work, I guess I need to find a tiller wheel ^_^

[petegolf41]

Originally posted by Magneto:

There's a setting in the Zibo pad (on your left) that will change the nosewheel steering. Click the setting to Yaw, and you can steer with the rudder.

It's under "Settings & Features" > "Hardware Configuration" ...2nd line down, click Yaw (or your desired preference...)

..Hope that helps

[petegolf41]

Clicked on yaw and saved it. Works great with rudder pedals.

[Metallic]

Thanks friends for helping my issue :3 - now and I can go back to flying! Soon I'll get some actual hardware but for now, thankyou to all ;)

[J.J. McQuade]

There's a setting in the Zibo pad (on your left) that will change the nosewheel steering. Click the setting to Yaw, and you can steer with the rudder unless your using the GeForce/Saitek Flight Yoke System, read below.

It's under "Settings & Features" > "Hardware Configuration" ...2nd line down, click Yaw (or your desired preference...)

If however you are using the GeForce/Saitek Flight Yoke System, the above settings won't work, you will need to set it it "Roll" for the Yoke to work in conjunction with the rudder..

[gekco]

Originally posted by J.J. McQuade:

If however you are using the GeForce/Saitek Flight Yoke System, the above settings won't work, you will need to set it it "Roll" for the Yoke to work in conjunction with the rudder..

If you're using the Logitech yoke you should have pedals anyway making this statement irrelevant.

[Metallic]

This is kind of old but thanks guys.