Error when starting new flight in 11.10

[John W]

Just a little while ago XP11.10 started giving the following error:
BE ADVISED

There was a problem loading the scenery package:
Custom Scenery/Global Airports/
The scenery may not look correct.
Please see the log.txt file for detailed error information.

I tried validating game cache. Started XP11.10 again and got the same error. So I deleted the Global Airports folder under Custom Scenery and revalidated files. Over 2,000 files were reacquired but I still get the same error.

Was there some update to XP11 that is causing this?

[🐉 Ðŗąçø 🐉]

^^ Have you added KPHX as a download to X-Plane at any point?

[John W]

I'm checking something out. I have backed up my aircraft, custom scenery, plugins, downloads folders and have uninstalled XP11. Deleted all folders and am reinstalling right now. I will look for the error going to KPHX before I start reinstalling anything.

OK clean install of 11.10R3, Configured X-52 controller, started new flight, no addons installed, still got the error when selecting KPHX. So the person who said they couldn't duplicate needs to try again. Or did I miss something in how I just recreated the issue?

[🐉 Ðŗąçø 🐉]

Messaggio originale di John W:

I'm checking something out. I have backed up my aircraft, custom scenery, plugins, downloads folders and have uninstalled XP11. Deleted all folders and am reinstalling right now. I will look for the error going to KPHX before I start reinstalling anything.

OK clean install of 11.10R3, Configured X-52 controller, started new flight, no addons installed, still got the error when selecting KPHX. So the person who said they couldn't duplicate needs to try again. Or did I miss something in how I just recreated the issue?

No that's tied to the airport. It's not on your end.

[Freakyweakywoo]

Messaggio originale di 🐉 Ðŗąçø 🐉:

^^ Have you added KPHX as a download to X-Plane at any point?

My X-plane is 100% vanilla, installed the sim and all the updates via steam, nothing else. Today is the first time I've ever hand any issues.

[Tom Johnson]

Messaggio originale di Freakyweakywoo:

Just updated, wanted to fly from Prescott Love down to the new KPHX, game crashes on loading. I have never had any 3rd party airports installed.

+-------------------------------------------------------------------------------
0:00:34.639 E/SYS: | There was a problem loading the scenery package:
0:00:34.639 E/SYS: | Custom Scenery/Global Airports/
0:00:34.639 E/SYS: | The scenery may not look correct.
0:00:34.639 E/SYS: | Please see the log.txt file for detailed error information.
0:00:34.639 E/SYS: | (io_dsf.cpp:643)
0:00:34.639 E/SYS: +-------------------------------------------------------------------------------
0:00:34.639 E/SCN: Custom Scenery/Global Airports/Earth nav data/+30-120/+33-112.dsf:
0:00:34.639 E/SCN: Unable to load object file: Resources/default scenery/sim objects/custom_spills/120_degrees/300m/white_uplight_300m.obj
Failed to open Resources/default scenery/sim objects/custom_spills/120_degrees/300m/orange_uplight_300m.obj: the file cannot be opened.
0:00:34.639 E/SCN: Custom Scenery/Global Airports/Earth nav data/+30-120/+33-112.dsf:
0:00:34.639 E/SCN: Unable to load object file: Resources/default scenery/sim objects/custom_spills/120_degrees/300m/orange_uplight_300m.obj
Failed to open Resources/default scenery/sim objects/custom_spills/120_degrees/300m/white_uplight_300m.obj: the file cannot be opened.
0:00:34.639 I/SCN: DSF load time: 7419497 for file Custom Scenery/Global Airports/Earth nav data/+30-120/+33-112.dsf (0 tris)
0:00:34.639 I/SCN: DSF load time: 1624078 for file Global Scenery/X-Plane 11 Global Scenery/Earth nav data/+30-120/+33-112.dsf (253782 tris)
0:00:34.639 I/SCN: DSF load time: 801 for file Custom Scenery/Global Airports/Earth nav data/+30-120/+34-114.dsf (0 tris)
0:00:34.639 I/SCN: DSF load time: 147703 for file Custom Scenery/Global Airports/Earth nav data/+30-120/+35-111.dsf (0 tris)
0:00:34.639 I/SCN: DSF load time: 991601 for file Global Scenery/X-Plane 11 Global Scenery/Earth nav data/+30-120/+34-114.dsf (177953 tris)
0:00:34.639 I/SCN: DSF load time: 10576 for file Custom Scenery/Global Airports/Earth nav data/+30-120/+33-111.dsf (0 tris)
0:00:34.639 I/SCN: DSF load time: 1029645 for file Global Scenery/X-Plane 11 Global Scenery/Earth nav data/+30-120/+35-111.dsf (167911 tris)
0:00:34.639 I/SCN: DSF load time: 1141157 for file Global Scenery/X-Plane 11 Global Scenery/Earth nav data/+30-120/+33-111.dsf (182185 tris)
0:00:34.639 E/SCN: Custom Scenery/Global Airports/Earth nav data/+30-120/+33-113.dsf:
0:00:34.639 E/SCN: Unable to load object file: Resources/default scenery/sim objects/custom_spills/120_degrees/300m/white_uplight_300m.obj
Failed to open Resources/default scenery/sim objects/custom_spills/120_degrees/300m/blue_uplight_300m.obj: the file cannot be opened.
0:00:34.639 E/SCN: Custom Scenery/Global Airports/Earth nav data/+30-120/+33-113.dsf:
0:00:34.639 E/SCN: Unable to load object file: Resources/default scenery/sim objects/custom_spills/120_degrees/300m/blue_uplight_300m.obj
Failed to open Resources/default scenery/sim objects/custom_spills/120_degrees/300m/orange_uplight_300m.obj: the file cannot be opened.
0:00:34.639 E/SCN: Custom Scenery/Global Airports/Earth nav data/+30-120/+33-113.dsf:
0:00:34.639 E/SCN: Unable to load object file: Resources/default scenery/sim objects/custom_spills/120_degrees/300m/orange_uplight_300m.obj

I am getting this same error, I posted on the X-plane.org forum, but no reply as of yet

[John W]

I tried starting a flight from Prescot Love KPRC and got the same error. When I click on "understood" the flight continues to load and I don't see any errors with the scenery. Same situation when selecting KPHX. Wonder if I should check other Arizona airports.

[🐉 Ðŗąçø 🐉]

Messaggio originale di John W:

I tried starting a flight from Prescot Love KPRC and got the same error. When I click on "understood" the flight continues to load and I don't see any errors with the scenery. Same situation when selecting KPHX. Wonder if I should check other Arizona airports.

If you load an airport near KPHX, then that airport too has to load. But yes - there is definitely a problem with this scenery.

IF YOU ARE EXPERIENCING ISSUES WITH KPHX OR THE SURROUNDING AREA, OR WOULD LIKE TO CONFIRM THIS ERROR, PLEASE DO SO ON THIS POST.

[John W]

I've tried a few airports in Arizona with mixed results:
ICAO Error
KSEZ no
KPRC yes
KLUF yes
KIWA no
34AZ no
KGYR no
KSDL no

I'll keep checking.

[🐉 Ðŗąçø 🐉]

Messaggio originale di John W:

I've tried a few airports in Arizona with mixed results:
ICAO Error
KSEZ no
KPRC yes
KLUF yes
KIWA no
34AZ no
KGYR no
KSDL no

I'll keep checking.

That's very intersting. It may not be KPHX then, but another airport nearby.

[John W]

OK here is the error I am getting from the log.txt file:

0:01:07.146 I/SCN: DSF load time: 1962682 for file Global Scenery/X-Plane 11 Global Scenery/Earth nav data/+30-120/+33-113.dsf (259386 tris)
0:01:16.711 E/SYS: +-------------------------------------------------------------------------------
0:01:16.711 E/SYS: | There was a problem loading the scenery package:
0:01:16.711 E/SYS: | Custom Scenery/Global Airports/
0:01:16.711 E/SYS: | The scenery may not look correct.
0:01:16.711 E/SYS: | Please see the log.txt file for detailed error information.
0:01:16.711 E/SYS: | (io_dsf.cpp:643)
0:01:16.711 E/SYS: +-------------------------------------------------------------------------------

I tried removing the file +33-113.dsf and ran a new flight with KPHX. I got the following in the log.txt.

0:05:28.381 I/SCN: DSF load time: 2306561 for file Custom Scenery/Global Airports/Earth nav data/+30-120/+33-112.dsf (0 tris)
0:05:29.666 E/SYS: +-------------------------------------------------------------------------------
0:05:29.666 E/SYS: | There was a problem loading the scenery package:
0:05:29.666 E/SYS: | Custom Scenery/Global Airports/
0:05:29.666 E/SYS: | The scenery may not look correct.
0:05:29.666 E/SYS: | Please see the log.txt file for detailed error information.
0:05:29.666 E/SYS: | (io_dsf.cpp:643)
0:05:29.666 E/SYS: +-------------------------------------------------------------------------------
0:05:29.666 I/SCN: DSF load time: 1902996 for file Global Scenery/X-Plane 11 Global Scenery/Earth nav data/+30-120/+33-112.dsf (253782 tris)

So I don't know what I'm reading here. The problem apparently is "io_dsf.cpp:643". I restored the file and will continue to investigate. This is now the final release 11.10r3. This error didn't happen in previous versions of XP11.

[Tom Johnson]

Messaggio originale di John W:

I've tried a few airports in Arizona with mixed results:
ICAO Error
KSEZ no
KPRC yes
KLUF yes
KIWA no
34AZ no
KGYR no
KSDL no

I'll keep checking.

This is not making any sense,

I removed the Nimbus version and added the MisterX6 freeware version, and the same error,
Removed that one and went default and the same error

Checked the following airports
ICAO - no error
KFFZ – no error
KTUS – no error
KLUF – no error
KPRC – no error
KFLG – no error
KLVS – no error
KVGT – ERROR - + ODD OBJECTS AT THE AIRPORT

None of these above are custom scenery

[Tom Johnson]

Messaggio originale di Tom Johnson:

Messaggio originale di John W:

I've tried a few airports in Arizona with mixed results:
ICAO Error
KSEZ no
KPRC yes
KLUF yes
KIWA no
34AZ no
KGYR no
KSDL no

I'll keep checking.

This is not making any sense,

I removed the Nimbus version and added the MisterX6 freeware version, and the same error,
Removed that one and went default and the same error

Checked the following airports
ICAO - no error
KFFZ – no error
KTUS – no error
KLUF – no error
KPRC – no error
KFLG – no error
KLVS – no error
KVGT – ERROR - + ODD OBJECTS AT THE AIRPORT

None of these above are custom scenery

Just added a freeware version of KVGT by Zoidberg538 and still get the error but the odd objects are gone now.

When I start X-Plane 11 it says 11.10 for the version, I have betas enabled

[John W]

I checked KVGT and got an error about KLAS Las Vegas Mc Carran. KVGT looks ok and when I go to KLAS it looks OK. I deleted the KLAS Las Vegas Mc Carran folder and went to KVGT and it still looks OK and I didn't get an error. Went to KLAS and there is nothing there! I'll keep checking more but I did not have any of these problems before 11.10r3.

[steve67]

Messaggio originale di John W:

Does anyone else who is running the beta get this error when going to KPHX?

The same happens to me @ KPHX with a fresh install. Opening the log file it says:
Unable to load object file: Resources/default scenery/sim objects/custom_spills/120_degrees/300m/white_uplight_300m.obj
and
Unable to load object file: Resources/default scenery/sim objects/custom_spills/120_degrees/300m/orange_uplight_300m.obj

So I checked the path, and noticed that I don't even had the 300m folder under 120_degrees folder

I verified the cache integrity but no success. The 300m folder is still missing. So I uninstalled and installed again XP11. Now I have the 300m folder but it's empty!!!

[John W]

I just checked mine since I had done a clean install the other day and I also have a 300m folder that is empty.

I searched the folders under SteamLibrary\steamapps\common\X-Plane 11\Resources\default scenery\sim objects\custom_spills\60_degrees and found aa 300m folder. I copied the files from there and pasted them into the 300m folder under 120_degrees. Started XP11 and select KPHX, no error, restarted XP11 and selected KPRC, no error. So that seems to be a temporary fix until Laminar can get those files added to the game cache.

TEMPORARY FIX!