DIRECTX 3D AND MY DDI 11.1D

[damien.picardi]

Hi,
Sorry for my english.
i m not an informatician but i have a problem "fatal error direct 3D is not available. i don't understand because i search into this discussions and i've see that if you have more than 11 it's ok for the DDI and my DDI is 11.1
Normally it 's good,no.
Thanks a lot to help me, i want to play this game.
Damien

[NathaN]

What gpu are you using?

[damien.picardi]

Initialize engine version: 4.3.4f1 (216286)
GfxDevice: creating device client; threaded=1
Direct3D:
Version: Direct3D 11.0 [level 10.1]
Renderer: Intel(R) HD Graphics (ID=0x106)
Vendor: Intel
VRAM: 1664 MB




WARNING: Shader Unsupported: 'Hidden/Golf/SkyPost' - Pass '' shader state not supported
WARNING: Shader Unsupported: 'Hidden/Golf/SkyPost' - Setting to default shader.
7] vs_5_0

WARNING: Shader Unsupported: 'Hidden/Dof/DX11Dof' - Pass '' shader state not supported
WARNING: Shader Unsupported: 'Hidden/Dof/DX11Dof' - Setting to default shader.

[NathaN]

You are using dx10.1 hardware. You need dx11.

[damien.picardi]

i know but when i disactivate my gpu i start but lag, i have :

Initialize engine version: 4.3.4f1 (216286)
GfxDevice: creating device client; threaded=1
Direct3D:
Version: Direct3D 11.0 [level 11.0]
Renderer: Microsoft Basic Render Driver (ID=0x8c)
Vendor: Microsoft
VRAM: 1993 MB

[NathaN]

So what gpu is it? Maybe itd not good enough. The 1st one you sent was intdl hd. INtegrated graphics. Not a real gpu.

What is the gpu you are disabling?

[damien.picardi]

i think that it's not possible with my pc.I m very disapointed...
it's not another gpu, it's two processor cpu B980 2.4 GHZ

[damien.picardi]

when i have buy this game i have watch the minimum riquired and my pc says direct x 3d level12 and VRAM up to 1000 but when my graphic is activate my directX is 10.1 and when is disctivate my directX is 11. i have see this problem with output log because my system information whem i have buy the game was good with your minimum.
System Information
------------------
Time of this report: 11/24/2016, 19:43:34
Machine name: DAMIEN
Machine Id: {BF9216EE-D048-4571-BA93-4CFEE8287CB7}
Operating System: Windows 10 Famille 64-bit (10.0, Build 14393) (14393.rs1_release_inmarket.161102-0100)
Language: French (Regional Setting: French)
System Manufacturer: Hewlett-Packard
System Model: HP Pavilion g7 Notebook PC
BIOS: F.14
Processor: Intel(R) Pentium(R) CPU B980 @ 2.40GHz (2 CPUs), ~2.4GHz
Memory: 4096MB RAM
Available OS Memory: 3986MB RAM
Page File: 1817MB used, 2872MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 12
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
Miracast: Not Available
Microsoft Graphics Hybrid: Not Supported
DxDiag Version: 10.00.14393.0000 64bit Unicode

------------
DxDiag Notes
------------
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Input Tab: No problems found.

--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)

---------------
Display Devices
---------------
Card name: Intel(R) HD Graphics
Manufacturer: Intel Corporation
Chip type: Intel(R) HD Graphics Family
DAC type: Internal
Device Type: Full Device
Device Key: Enum\PCI\VEN_8086&DEV_0106&SUBSYS_1845103C&REV_09
Device Status: 0180200A [DN_DRIVER_LOADED|DN_STARTED|DN_DISABLEABLE|DN_NT_ENUMERATOR|DN_NT_DRIVER]
Device Problem Code: No Problem
Driver Problem Code: Unknown
Display Memory: 1664 MB
Dedicated Memory: 32 MB
Shared Memory: 1632 MB
Current Mode: 1600 x 900 (32 bit) (60Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: unknown
Monitor Id: LGD027A
Native Mode: 1600 x 900(p) (59.985Hz)
Output Type: Internal
Driver Name: igdumd64.dll,igd10umd64.dll,igd10umd64.dll
Driver File Version: 9.17.0010.4229 (English)
Driver Version: 9.17.10.4229
DDI Version: 11.1
Feature Levels: 10_1,10_0,9_3,9_2,9_1
Driver Model: WDDM 1.2
Graphics Preemption: DMA
Compute Preemption: DMA
Miracast: Not Supported by Graphics driver
Hybrid Graphics GPU: Not Applicable
Power P-states: Not Applicable
Driver Attributes: Final Retail
Driver Date/Size: 26/05/2015 01:00:00, 12694808 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: Unknown
Device Identifier: {D7B78E66-4246-11CF-0963-4F38B7C2C435}
Vendor ID: 0x8086
Device ID: 0x0106
SubSys ID: 0x1845103C
Revision ID: 0x0009
Driver Strong Name: oem8.inf:5f63e534c4a533dd:iSNBM0:9.17.10.4229:pci\ven_8086&dev_0106

[NathaN]

Yeah you can run dx11 or dx12 software but the hardware can only really run dx10.1
Not many games will play well on integrated graphics. Time for an upgrade 😀