Problem with morph vox microphone

[Epic1012345]

Basicly my normal mic works but the morphvox one cannot pick up sound can someone help?

[Mystix]

From the top menu in MorphVox Pro click on "MorphVox" then select Preferences.

In the Preferences box go to Device Settings.
From the Drivers Mode select which one you think would be best.

Under Microphone, select the correct Mic you intend to speak into.

For Playback select the correct device / speaker for sound output.

You could also go to the Sound Settings section and experiment with some of the settings there as well.

When you think you have the settings you like, click the OK button and test things.

Be sure to have ON the "Morph" button click to enable voice-morphing (you'll see a green light lit when it's on) and to hear your own voice playback to see what it sounds like you could also click on the Listen button.

When you're speaking, and if things are working properly, you can see some audio-level bars showing accordingly.

If it's all still not working properly, then I'd suggest to go into your Windows Recording Devices properties (right-click on the little speaker-icon in your Windows task-bar), and check the Properties of your Microphone. Check to see if the Levels are high-enough (if too low it may not be picking up your voice well enough).
I'd also suggest that in the Advanced section to Un-check the option in Exclusive Mode of "Allow applications to take exclusive control of this device."

Good luck.

PS: When wanting to use in a program, for example with Skype, you'd go into the Audio Settings for that program and choose the "Screaming Bee" as the Mic input device.
Screaming Bee is the driver associated with MorphVox.
Then to have your voice Morphed click the Morph-button on in MorphVox Pro, and for your own real voice click the Morph-button to off.

[Toph]

I'm having this same problem. When I speak into it it works for the MorphVox Software, but the driver shows no input at all. I wish there was actually some support to help fix this problem. Has anyone else had this problem? Has anyone figured out how to fix it?

[Zndtsu!]

Publicado originalmente por LoneWolfDon:

From the top menu in MorphVox Pro click on "MorphVox" then select Preferences.

In the Preferences box go to Device Settings.
From the Drivers Mode select which one you think would be best (or leave at the default). I went with "Legacy Drivers" as it seem to work more stable on my computer.

Under Microphone, select the correct Mic you intend to speak into.

For Playback select the correct device / speaker for sound output.

You could also go to the Sound Settings section and experiment with some of the settings there as well.

When you think you have the settings you like, click the OK button and test things.

Be sure to have ON the "Morph" button click to enable voice-morphing (you'll see a green light lit when it's on) and to hear your own voice playback to see what it sounds like you could also click on the Listen button.

When you're speaking, and if things are working properly, you can see some audio-level bars showing accordingly.

If it's all still not working properly, then I'd suggest to go into your Windows Recording Devices properties (right-click on the little speaker-icon in your Windows task-bar), and check the Properties of your Microphone. Check to see if the Levels are high-enough (if too low it may not be picking up your voice well enough).
I'd also suggest that in the Advanced section to Un-check the option in Exclusive Mode of "Allow applications to take exclusive control of this device."

Good luck.

PS: When wanting to use in a program, for example with Skype, you'd go into the Audio Settings for that program and choose the "Screaming Bee" as the Mic input device.
Screaming Bee is the driver associated with MorphVox.
Then to have your voice Morphed click the Morph-button on in MorphVox Pro, and for your own real voice click the Morph-button to off.

I AM GOING TO BE MAD IT ISNT WORK !

[Mystix]

Try contacting the Developers for official Support:
http://www.screamingbee.com/support/contacts.aspx

[CoolHunkBen]

You need a strong mic at the least a yetti. Or it doesn't work

[Regicide]

worked for me thank you

[wakeme]

did i miss sometihing ,...in the readings here ?

in Windows Audio Properties , Record Tab ,
the Screeming Bee Device Driver NEEDS to be selected as the :

Default Device
Default communications Device
( 2 items to "Set" )

aka ( your Physical mic is NOT set as the default device , NOT anymore )

the Screaming Bee Device Driver will Find your physical mic , and route it
thru MorphVOX Pro ,...ALL apps will\should automatically find the Screaming Bee
Device , which will then automatically route thru MorphVOX Pro .
your physical mic will now be morphed ALL the time , System Wide .

the "Physical mic's" Level here , is set to 100 %
the Screaming Bee Level here , is set to 65 %

MorphVOX Pro and the Screaming Bee Device Driver support
16 bit 44.1 khz mono ,...so i have the Physical
mic set to 16 bit 44.1 khz .

Steam Client mic test , worked just fine . no issues ( with morph ).
Vegas , Movie Studio , both find the "MIc" just fine ( with morph )
it all works .

the above "2 items to set" , is documanted by Screaming Bee help and web site .
the above is the Proper\best way to use MorphVOX Pro .

P.S.
in order to use your Physical mic with morph ,...MorphVOX Pro MUST be running .
( as sometimes i forget to Launch MorphVOX Pro , wondering why i didn't
have the morph )

[Void]

so morphvox is working and when i hit listen i hear my morphed voice. yet when i open my recording tab i see my normal mic working when i speak but screamingbee has no output. it was working fine for me yesterday so idk what soing on...
any body have an idea?

[AA battery]

Change both qualities of the mic to CD or 44100hz or something like that

[Zero]

my headset speaker apparently isn't sensitive enough. I have to push my face against the microphone and even then its not great. How do I make it more sensitive or something?

[three]

right click on the speaker icon in your tray (windows 10) -> open sound options -> on the right side you should see - "microphone privacy settings" - open it -> allow applications access to the microphone - turn ON -> restart MorphVOX.
this ♥♥♥♥ solved this problem for me.
sorry for necropost, just wanted to help future self or anyone else, bcoz this thread is one of the first which shows up in google(atleast for me) :)

[wakeme]

Publicado originalmente por 󠀡󠀡:

right click on the speaker icon in your tray (windows 10) -> open sound options -> on the right side you should see - "microphone privacy settings" - open it -> allow applications access to the microphone - turn ON -> restart MorphVOX.
this ♥♥♥♥ solved this problem for me.
sorry for necropost, just wanted to help future self or anyone else, bcoz this thread is one of the first which shows up in google(atleast for me) :)

thanks , windows 10 added the features to :
Turn OFF web cam , Turn OFF camera , Turn OFF mic ,
as a security feature , so then we need to Turn it On , to use it .
at least we are now aware that We Turned it On , thus we can't
blame miki-soft for any media breach . they only did it to
protect themselves , NOT us .

[bdchiz]

I just tried to do the set up but when I used my headset mic it dose not pick up on the setup and don't know how to fix it and the mic volume is at max , when I used my laptops mic it picks it up fine.

[Twitch.AndrewTate]

can somone help me with this? We can screen share on discord so its much clearer

[Peter]

try to run as admin