Controller Issue SOLVED! (x360ce)

[Molgerax]

I found it! I found it! Hahahahaha...'xcuse me.

So, if you want to get Cuphead running with x360ce, all you need to do is open Cuphead, go into Options > Controls, press Remove Controller, then manually open up x360ce (windowed mode is recommended). Make sure it is running completely fine. Then, go back to Cuphead and press Assign Controller, click inside the x360ce window and quickly press a button on your controller. Voilà!

To check if it worked, just look at the button mapping of the controller: If it says D-Pad Up, Left Stick Up, A, X and the likes, congratulations! Enjoy the game without any further restrictions.
If it says Axis 0, Button 10, or is completely blank, then I don't know either.

But I hope it works for everyone with x360ce, it just took me 6 hours to figure out to enjoy the game with my GameCube controller and I know it's a huge pain in the butt.

[Nabs]

Ursprünglich geschrieben von shadowcowz:

I know my comment my not pertain to x360ce, but for anyone having controller issue using DS4windows, in profiles change the controller settings to use Dinupt only, this fixed my issue with player 2 spawing when using my ps4 controller

Just make sure to go into settings and check "Hide DS4 Controller" and you can leave xinput on.

[RiderikReyes.TTV]

Please HELP! I CAN'T!!! My generic control does not want to work! I cant fix it!

[ssgod]

Ursprünglich geschrieben von Riderik Reyes:

Please HELP! I CAN'T!!! My generic control does not want to work! I cant fix it!

Did you try going to steam settings -> controller -> General control settings and check the generic gamepad configuration support? Also make sure to configure your controls in there. For some reason that was the best solution for me and now player 2 doesnt spawn anymore as well!

I also use a generic cintroller.

[FeDDe]

Can someone please upload their x360ce configuration or something? I did the steps, but the 2nd player its still appearing

[RiderikReyes.TTV]

Ursprünglich geschrieben von ssgod:

Ursprünglich geschrieben von Riderik Reyes:

Please HELP! I CAN'T!!! My generic control does not want to work! I cant fix it!

Did you try going to steam settings -> controller -> General control settings and check the generic gamepad configuration support? Also make sure to configure your controls in there. For some reason that was the best solution for me and now player 2 doesnt spawn anymore as well!

I also use a generic cintroller.

YOU ARE A GENIOUS!!! MANY, THANK YOU VERY MUCH!!! YEAH !!!

[RiderikReyes.TTV]

I have a new problem!

I can already play Cuphead and my Steam games with my Generic Control, but apparently it was generally deconfigured in my pc, in other games that have the buttons are wrong and are repeated (Example: press button "A" and at the same time press "START" with the same button) and I do not know how to reconfigure it!

PLEASE HELP!

[ssgod]

Ursprünglich geschrieben von Riderik Reyes:

I have a new problem!

I can already play Cuphead and my Steam games with my Generic Control, but apparently it was generally deconfigured in my pc, in other games that have the buttons are wrong and are repeated (Example: press button "A" and at the same time press "START" with the same button) and I do not know how to reconfigure it!

PLEASE HELP!

You configure the controls at the same place as the checkbox. just click on the controller under "detected controllers" and for me there should be a define layout option.

[Squall Leonhart]

Ursprünglich geschrieben von Molgerax.Productions:

I found it! I found it! Hahahahaha...'xcuse me.

So, if you want to get Cuphead running with x360ce, all you need to do is open Cuphead, go into Options > Controls, press Remove Controller, then manually open up x360ce (windowed mode is recommended). Make sure it is running completely fine. Then, go back to Cuphead and press Assign Controller, click inside the x360ce window and quickly press a button on your controller. Voilà!

X360CE co-developer here

What you are writing makes no sense.
The setup app has absolutely nothing to do with the function of the DLL apart from configuring the INI.

[gabriel_brigida97]

Ursprünglich geschrieben von Squall Leonhart:

Ursprünglich geschrieben von Molgerax.Productions:

I found it! I found it! Hahahahaha...'xcuse me.

So, if you want to get Cuphead running with x360ce, all you need to do is open Cuphead, go into Options > Controls, press Remove Controller, then manually open up x360ce (windowed mode is recommended). Make sure it is running completely fine. Then, go back to Cuphead and press Assign Controller, click inside the x360ce window and quickly press a button on your controller. Voilà!

X360CE co-developer here

What you are writing makes no sense.
The setup app has absolutely nothing to do with the function of the DLL apart from configuring the INI.

Actually, the important thing is to get out of the cuphead window and press a button, no matter what is the active window after you minimize cuphead.
It is just coincidence that people who have done that got in x360ce window, cuz it was the last program left open, and thought it was the solution...

[Serbian Prinny]

Why is this issue occuring with this game?

[bum]

is it not working because im using a horipad S? please let me know.

[bum]

nevermind nobody told me the x360ce and the cuphead game had to be in same folder or the cuphead game should be minimized while pressing buttons on x360ce

[Cosbot]

Thank you!

[Garavel]

Very simple yet effective solution thanks man!

[nonua]

can you help me,
when I go to assign controller then click on x360ce, nothing happens
I tried doing anything it still doesn't work.
pls help, thnx in advance