Flip a truck?

[FM Helldiver Radio]

I just managed to miss a bridge a little.
I pulled myself out of the river but the truck now lies on its side.
pulling it around with the own winch or other vehicles won't help.
Is there a way to attach it to a crane to lift it?

[The_Grunt]

As far as I know, you need to use another truck and pull it on angle to get it up. That is how I've done it.

[시니론_]

You have to pin it against something so when you winch it it rolls up. if you have it just on flat ground it will just slide instead of roll. if you have another vehicle handy you can park it against it and use that vehicle to pin it, just dont be suprised if some damage happens

[AfkForCoffee]

For the trucks I've noticed it works best to attach a winch to the rear then pull at around 45 degrees angle. Attach the winch at a distance, driver closer, then reverse at full speed and as the cable tightens then keep reversing and then pull the winch. This should cause a harsh jerking motion which usually causes the truck to flip on it's wheels.

[Wizard]

Thanks my dudes. I just fixated that ♥♥♥♥♥♥ with a 2nd truck and pushed it wtih a 3rd and flipped it over.

[mud]

sometimes you can also just turn the front wheels of the rolled vehicle towards the ground and it will bite so you can roll it back onto it's wheels. of course the angle does matter with any winching, but it should help next time you try.

[Wizard]

Originally posted by 8up:

sometimes you can also just turn the front wheels of the rolled vehicle towards the ground and it will bite so you can roll it back onto it's wheels. of course the angle does matter with any winching, but it should help next time you try.

Ye Im not sure if the AI doesnt try turning the wheel when I pull and annulating the turn I did.

[mud]

when winching it is automaticly set for the pulled vehicle to auto-steer, just click on the left/right till it is turned when in advanced menu of the vehicle doing the pulling. hope we all helped and good luck. have fun.