4080: Mid Graphics Settings, still Unplayable

[Memnock]

I started playing the demo on "ultra" graphics settings on my 4080 computer and was getting such poor performance, that I dropped the graphics settings down to "MID", and it was still unplayable. It was so bad I couldn't get more than 15 min into the game.

Square Enix, you have to fix this before you launch. Push pack your launch date if you have to.

[CH13F]

....
specs

[rival123]

i´ve an AMD cpu 5950 and rx7900xtx 24 gb,the game was working fine during last days without any special update for it and now i dont know why the screen appears with many vertical lines, this didn´t happen before

[RoronoaZoro]

4080 and 7800x3d and having granitic framerate.

[Kaliz]

3080 ultra settings no issues here

[Blu Neko]

Ursprünglich geschrieben von LordSylc:

RX 570 not open the game :Reflex:

You're way below the minimum specs and the rx 570 is unsupported by AMD outside of security updates.

[rival123]

i just discovered the issue, i had enabled virtualization on my cpu, if you have enabled this option you could have screen issues. im going to check memory integrity, can be an issue aswell, but it´s so estrange because this does not happen on epic games app. it only happens on steam, i wiil check it.

[Dave]

Ursprünglich geschrieben von Memnock:

I started playing the demo on "ultra" graphics settings on my 4080 computer and was getting such poor performance, that I dropped the graphics settings down to "MID", and it was still unplayable. It was so bad I couldn't get more than 15 min into the game.

Square Enix, you have to fix this before you launch. Push pack your launch date if you have to.

Something is wrong with your rig OR you have the settings cranked up too high OR you paired that GPU with a weak CPU. Did you turn on DLSS upscaling and DLSS Frame Gen? Are you playing at 1440p or 2160p?

I'm on a 4090 at 2560x1440p, all settings maxed, DLSS frame gen on, DLSS upscaling set to DLAA, VRS off, and I'm pulling 120 FPS. I could play in 4K, but then I'd have to use upscalling, and upscalling causes particles and other effects to look weird sometimes. So I stick to 1440p most of the time.

What's bad are the stuttering and jittering. Often when a cut scene loads, I'll drop to 30 fps for a second before going back to 120 (I have the cutscene fps unlock mod installed.

this is also a demo and not the final product.

My rig: i9-12900K @ 5.5GHz, 64GB, RTX 4090, running on m.2 NVMe SSDs

[PcMasterRace]

are your drivers old. I have a 7900xtx so around same strength of card for raster. For me it runs fine 4k maxed settings. I even got a mod that makes my cut scenes 120fps. You can even give cut scenes framegen.

[Kopseer]

Ursprünglich geschrieben von Kaliz:

3080 ultra settings no issues here

I also have a 3080 but at 4k the performance for the second part of the demo, the Eikonic challenge, was abysmal. Which resolution did you play at?