PS4 Controller

[Philosoraptor]

Hello guys! I have a problem with the demo. The game works fine when I'm not using the DS4 Tool but it would not let me remap the keys on the controller. When I use the DS4 Tool to map it out as a Xbox 360 controller the game reconizes 2 controller in one.

I'm super happy that this game recognizes the DS4 without any drivers but the bottons are maped out in a wierd position and it wouldn't let me change them.

[Philosoraptor]

I wouldn't personally know if this works with a steam controller. Since I don't have one. Sorry man, maybe someone else is experiencing the same problem?

[Jodeth]

The solution that works for me is to assign a button at the precise moment, which seems to be in the 30-40 millisecond range after pressing Circle. Setting up a controller should never be this damn difficult. ♥♥♥♥... It's like a game in itself.

[Not Gaming]

use the steam big picture DS4 configuration and make a standard XBOX360 config

[Scrub Zero]

So, I tried using the hide DS4 option and it gave me an error on the bottom saying that it didn't work and to close steam and uplay before changing the setting. I did that, and it worked perfectly fine. Hope that helps people out since I had the same issue and checked that out.

[Brgthn]

Okay, so here is what I did, without the use of DS4Tools or InputMapper. (Or other similar programs)


1. Open Regedit
2. Go to "HKEY_CURRENT_USER\Software\Ubisoft\Rayman Legends\Settings\Player0"
3. To make things easier for you, go ahead and do this:
Rename "ActionMurphy" to "Square".
Rename "ActionHit" to "Triangle".
Rename "ActionJump" to "Circle".
Rename "ActionBack" to "Cross".

4. Rename "Cross" to "ActionJump".
5. Rename "Square" to "ActionHit".
6. Rename "Circle" to "ActionMurphy".
7. Rename "Triangle" to "ActionBack".
8. Right-click "ActionBack" and click 'modify'.
9. Change it to match this:

0000 03 00 00 00 00 00 00 00
0008 02 00 00 00 00 00 00 00
0010

Press "OK" and you're done.

Note: You open the briefcase in the menus with Circle instead of Triangle, but you should be able to live with that. Other than that the layout should be the same as PS4's.
Hope this helped someone.

[Davion Alexander Blackwing]

Bergethon, this doesn't work for me. I would be okay with just emulating 360 with DS4 but it's impossible because it overlays and shows as two controllers..

[Brgthn]

Where did it fail Davion? Are you using DS4Tools or any other 360 emulators while doing it?

[Q \/\/ 3 |2 T Y]

Originally posted by Philosoraptor:

I tried this and it didn't work :( Picture this. Devices and printers window is open. The DS4 Tool is open. In the Devices and printers you see the wireless controller (DS4) and the Emulated Xbox 360 controller. When you go to the DS4 Tool you click Hide DS4 Controller (in the Devices) the Xbox 360 controller disappears.
What a mystery

Hide DS4 Controller does work! But you have to quit all Apps/Games that use the xinput and restart ds4windows (using the Ryochan7 fork Version 1.4.121). Make sure that the "Set up game controller" app from Windows only shows the xbox360 controllers ordered on top.

[iSpeed]

Originally posted by Bergethon:

Okay, so here is what I did, without the use of DS4Tools or InputMapper. (Or other similar programs)


1. Open Regedit
2. Go to "HKEY_CURRENT_USER\Software\Ubisoft\Rayman Legends\Settings\Player0"
3. To make things easier for you, go ahead and do this:
Rename "ActionMurphy" to "Square".
Rename "ActionHit" to "Triangle".
Rename "ActionJump" to "Circle".
Rename "ActionBack" to "Cross".

4. Rename "Cross" to "ActionJump".
5. Rename "Square" to "ActionHit".
6. Rename "Circle" to "ActionMurphy".
7. Rename "Triangle" to "ActionBack".
8. Right-click "ActionBack" and click 'modify'.
9. Change it to match this:

0000 03 00 00 00 00 00 00 00
0008 02 00 00 00 00 00 00 00
0010

Press "OK" and you're done.

Note: You open the briefcase in the menus with Circle instead of Triangle, but you should be able to live with that. Other than that the layout should be the same as PS4's.
Hope this helped someone.

I don't care if this is 4 years old, this should be stickied.

[Ubi-Borealis]

We're glad to hear that Bergethon's post helped you out, iSpeed!

- Ubisoft Support

[Cosmoz]

Originally posted by Brgthn:

Okay, so here is what I did, without the use of DS4Tools or InputMapper. (Or other similar programs)


1. Open Regedit
2. Go to "HKEY_CURRENT_USER\Software\Ubisoft\Rayman Legends\Settings\Player0"
3. To make things easier for you, go ahead and do this:
Rename "ActionMurphy" to "Square".
Rename "ActionHit" to "Triangle".
Rename "ActionJump" to "Circle".
Rename "ActionBack" to "Cross".

4. Rename "Cross" to "ActionJump".
5. Rename "Square" to "ActionHit".
6. Rename "Circle" to "ActionMurphy".
7. Rename "Triangle" to "ActionBack".
8. Right-click "ActionBack" and click 'modify'.
9. Change it to match this:

0000 03 00 00 00 00 00 00 00
0008 02 00 00 00 00 00 00 00
0010

Press "OK" and you're done.

Note: You open the briefcase in the menus with Circle instead of Triangle, but you should be able to live with that. Other than that the layout should be the same as PS4's.
Hope this helped someone.

didn't work for me.. not sure what im doing wrong

[Ubi-WheelyDuck]

Originally posted by Cosmoz:

Originally posted by Brgthn:

Okay, so here is what I did, without the use of DS4Tools or InputMapper. (Or other similar programs)


1. Open Regedit
2. Go to "HKEY_CURRENT_USER\Software\Ubisoft\Rayman Legends\Settings\Player0"
3. To make things easier for you, go ahead and do this:
Rename "ActionMurphy" to "Square".
Rename "ActionHit" to "Triangle".
Rename "ActionJump" to "Circle".
Rename "ActionBack" to "Cross".

4. Rename "Cross" to "ActionJump".
5. Rename "Square" to "ActionHit".
6. Rename "Circle" to "ActionMurphy".
7. Rename "Triangle" to "ActionBack".
8. Right-click "ActionBack" and click 'modify'.
9. Change it to match this:

0000 03 00 00 00 00 00 00 00
0008 02 00 00 00 00 00 00 00
0010

Press "OK" and you're done.

Note: You open the briefcase in the menus with Circle instead of Triangle, but you should be able to live with that. Other than that the layout should be the same as PS4's.
Hope this helped someone.

didn't work for me.. not sure what im doing wrong

Hey there,

Thank you for your update and sorry to hear this didn't help.

Can I check whether you have the controller plugged in directly?

Many thanks,

- Ubisoft Support

[Cosmoz]

Originally posted by Ubi-WheelyDuck:

Originally posted by Cosmoz:

didn't work for me.. not sure what im doing wrong

Hey there,

Thank you for your update and sorry to hear this didn't help.

Can I check whether you have the controller plugged in directly?

Many thanks,

- Ubisoft Support

It's all fine now, got it to work, just another way
Thanks

[Ubi_TheBerry]

Originally posted by Cosmoz:

Originally posted by Ubi-WheelyDuck:

Hey there,

Thank you for your update and sorry to hear this didn't help.

Can I check whether you have the controller plugged in directly?

Many thanks,

- Ubisoft Support

It's all fine now, got it to work, just another way
Thanks

Thanks for the update Cosmoz, glad to see you're back up and running!

If there's anything else we can help with at all, please let us know.

Thank you!

- Ubisoft Support

[L0c0w0rLd]

1. Abrir editor de registros: Teclas Win + R: regedit
2. Ir a la ruta "HKEY_CURRENT_USER\Software\Ubisoft\Rayman Legends\Settings\Player0"

En la ruta mencionada en la segunda linea cambiar el

Cuadrado: 00
Cruz: 01
Circulo: 02
Triangulo: 03
L1: 04
R1: 05
L2: 07

ActionJump: X
0000 03 00 00 00 00 00 00 00
0008 01 00 00 00 00 00 00 00

ActionBack: O
0000 03 00 00 00 00 00 00 00
0008 02 00 00 00 00 00 00 00

ActionHit: ▲
0000 03 00 00 00 00 00 00 00
0008 00 00 00 00 00 00 00 00

ActionMurphy: O
0000 03 00 00 00 00 00 00 00
0008 (03-▲) o (02-O) 00 00 00 00 00 00 00

Esto me funcionó para reasignar los botones. Gracias a Brgthn por la respuesta.