FSR3 Frame Generation

[D4KiR]

anyone knows when the game gets FSR3 and frame generation?

[Scheneighnay]

Automatic12pro の投稿を引用：

hows this work with a 4090, anyone tried?

4090 has DLSS frame gen so I don't know why you would bother

[Reimu Hakurei x3]

Scheneighnay の投稿を引用：

Automatic12pro の投稿を引用：

hows this work with a 4090, anyone tried?

4090 has DLSS frame gen so I don't know why you would bother

I think its for the fluid motion thing that Nvidia lacks, it's really cool, as I understand it it works as, say you have 60fps only, the AMD card will fill the gaps between the frames in order to add more frames, like an in between animation that is different between the frames, the results is a far more fluid image as if it had alot more frames and even refresh rate, so instead of aiming for more FPS with good response time it looks "smoother" and hyper realistically smooth but can have noticeable input delay. There are ways to do it with an Nvidia card but only for videos and it's kind of yanky if not setup correctly. I used to do it watching anime with a third party software on my 4080 Super but I gave up on it due to artifacts and just lacking the knowledge to fine-tune it, but when it worked it was trippy how smooth it looked, almost like going from 60hz to 240hz.

[D4KiR]

yes frame generation is only good when you have 60+frames without it ~~

[PMA]

D4KiR の投稿を引用：

yes frame generation is only good when you have 60+frames without it ~~

Not true.. 30 series cards can run ASA very well if they added frame generation and optimized it properly.

[PMA]

Schildkroeti の投稿を引用：

Be Friendly & PMA <3 の投稿を引用：

I tried all the mods that I found, they all gave similar results on my 3050 gpu, but they caused input lag + weird artifacting after a long session.

can't wait for wildtards to once in their life do something right...

You can wait very long, because your GPU is extremely bad for these days. RTX 3050 is on the same level like a GTX 1660 Ti...
You should check some articles about your GPU, its basically a joke GPU card. Nothing for gaming.

yea i guess it is indeed a joke that can run cyberpunk at 50-60 fps on med/high :)

[Schildkroeti]

Be Friendly & PMA <3 の投稿を引用：

D4KiR の投稿を引用：

yes frame generation is only good when you have 60+frames without it ~~

Not true.. 30 series cards can run ASA very well if they added frame generation and optimized it properly.

He is right. Even with FSR3 FG you will start see artifacts, glitches and other visual issues if you have low base FPS. Stable 60 FPS are needed at least for a FG experience without issues. And starting at around ~100 base FPS (so around 200 FPS cap) FG also fails. FG is made to hit 120 (60 base FPS) or 144 (~70-80 FPS) FPS. 50 base FPS are okay too, but you see glitches here and there.

Be Friendly & PMA <3 の投稿を引用：

yea i guess it is indeed a joke that can run cyberpunk at 50-60 fps on med/high :)

Yeah a GTX 1660 Ti achieves very, very similiar results. What was the release date of GTX 1660 Ti? Ah, right, 2019.
3050 is just bad and makes no sense in the RTX series. Even 3060 is not that good. The sweatspot for current low end GPUs from team green starts at 3060 Ti. Or now the 4060 Ti.
ASA is unoptimized but you cant expect wonders with a old low end card, espically UE5 in general. And Cyberpunk is not a good comparison since its one of the biggest partners of Nvidia. Obviously Nvidia optimized the hell out of their drivers for Cyberpunk.

[D4KiR]

you have some stutter/input lag when you dont have enough fps without frame generation, it looks smooth with frame generation but it feels a little laggy or so

[D4KiR]

When the Plugin ist fixed they May add it

[Viserion]

I got RX 6650 XT. FSR 3 that's what I need. Hope it coming soon

[Sadge]

Viserion の投稿を引用：

I got RX 6650 XT. FSR 3 that's what I need. Hope it coming soon

FSR upscaling and frame generation is in the game, it just can't be enabled through the settings menu (wildcard why!?)

To do this, you need to go to the Engine.ini config located in your games installation folder (ARK Survival Ascended\ShooterGame\Saved\Config\Windows)

Next, add the following at the end of the ini:
[/script/ffxfsr3settings.ffxfsr3settings]

r.FidelityFX.FSR3.Enabled=True

r.FidelityFX.FSR3.UseNativeDX12=True

r.FidelityFX.FI.Enabled=True

To enable and change the upscaling, enter the following as a command:

r.FidelityFX.FSR3.QualityMode (number from 0 to 4 with 1 being quality and 4 being ultra performance)

There does seem to be some temporal stability issues with the frame generation, but the performance uplift is significant enough that I don't mind.

[D4KiR]

[/script/ffxfsr3settings.ffxfsr3settings]
r.FidelityFX.FSR3.Enabled=True
r.FidelityFX.FSR3.UseNativeDX12=True
r.FidelityFX.FI.Enabled=True
r.FidelityFX.FSR3.QualityMode=1

[/script/engine.localplayer]
AspectRatioAxisConstraint=AspectRatio_MaintainYFOV

yes already have it, also fix for widescreen FOV

[Maleficar]

D4KiR の投稿を引用：

[/script/ffxfsr3settings.ffxfsr3settings]
r.FidelityFX.FSR3.Enabled=True
r.FidelityFX.FSR3.UseNativeDX12=True
r.FidelityFX.FI.Enabled=True
r.FidelityFX.FSR3.QualityMode=1[/script/engine.localplayer]
AspectRatioAxisConstraint=AspectRatio_MaintainYFOV

yes already have it, also fix for widescreen FOV

Sadly this doesnt work at all for me. Still no Options available. Had hope for a sec.

[Derivat949]

It won't make the options toggleable, it will just be enabled and it 100% works

[Sadge]

Maleficar の投稿を引用：

D4KiR の投稿を引用：

[/script/ffxfsr3settings.ffxfsr3settings]
r.FidelityFX.FSR3.Enabled=True
r.FidelityFX.FSR3.UseNativeDX12=True
r.FidelityFX.FI.Enabled=True
r.FidelityFX.FSR3.QualityMode=1[/script/engine.localplayer]
AspectRatioAxisConstraint=AspectRatio_MaintainYFOV

yes already have it, also fix for widescreen FOV

Sadly this doesnt work at all for me. Still no Options available. Had hope for a sec.

You don't change it in the settings, it automatically enables it if you enter it correctly in the config. The FSR toggle in settings is for FSR Native AA which is not upscaling or frame generation.

[D4KiR]

王朋 の投稿を引用：

Maleficar の投稿を引用：

Sadly this doesnt work at all for me. Still no Options available. Had hope for a sec.

You don't change it in the settings, it automatically enables it if you enter it correctly in the config. The FSR toggle in settings is for FSR Native AA which is not upscaling or frame generation.

yes FSR ingame is not Frame generation, its upscaler, but its required for frame generation or not? (set to FSR)