Problem with imprinting

[Planet_Chris]

Hello,
I have a problem with imprinting my dinos. No matter what I set the Baby Mature Speed and the Baby Cuddle Intervall setting - the dino only gets 1% imprinted.

Then, I added "BabyImprintAmountMultiplier=7" to the Game.ini. After that, the imprint percentage dropped to Zero - even after I removed the line from the Game.ini and did a reboot of my PC.
I tested the line between line 1 and 2, 2 and 3 and so on, until the sixth line.

I hope, anyone can help. Thank you very much in advance!

[CaveMonkey]

What are your settings?

Mine that count are

BabyCuddleIntervalMultiplier=0.022
BabyMatureSpeedMultiplier=45
BabyImprintAmountMultiplier=2

Easy 100% for most dinos

[Planet_Chris]

Originally posted by CaveMonkey:

What are your settings?

Mine that count are

BabyCuddleIntervalMultiplier=0.022
BabyMatureSpeedMultiplier=45
BabyImprintingStatScaleMultiplier=2

Easy 100% for most dinos

I tested a lot - nothing worked for me - always 1% per cuddle.
At the moment I have:

BabyCuddleIntervalMultiplier=0.01
BabyMatureSpeedMultiplier=0.01
BabyImprintingStatScaleMultiplier=1.5

Also had the same settings. only the Mature Speed Multiplier was 20.

[CaveMonkey]

These two will not work

BabyCuddleIntervalMultiplier=0.01
BabyMatureSpeedMultiplier=0.01

BabyMatureSpeedMultiplier in your case needs to be 20

Also set the BabyImprintAmountMultiplier=2 increases percentage per imprint

Also try new baby, after settings changes I am seeing many stay with the settings it got at birth, this is a bug maybe?

[Planet_Chris]

Originally posted by CaveMonkey:

These two will not work

BabyCuddleIntervalMultiplier=0.01
BabyMatureSpeedMultiplier=0.01

BabyMatureSpeedMultiplier in your case needs to be 20

Also set the BabyImprintAmountMultiplier=2 increases percentage per imprint

Also try new baby, after settings changes I am seeing many stay with the settings it got at birth, this is a bug maybe?

The problem is, that no matter how I set the Imprint Amount Multiplier - the percentage stays 0% - I deleted the line from the .ini and tried a new dino - still 0%. All other settings were the same where I got at least 1%. Even, after I put both (Interval and Mature Speed) back to the original settings.

[CaveMonkey]

Sounds off for sure, hopefully not a corruption issue.

[Planet_Chris]

Originally posted by CaveMonkey:

Sounds off for sure, hopefully not a corruption issue.

Sadly I can't try it right now, because I'm not at my PC, but I'll try your settings.
My plan was to change it so that the imprinting takes place for over a few hours, but also the cuddle intervall should be 1 t 1.5 hours - depending on the dino.