ストアページ
Project CARS
すべて スレッド スクリーンショット 作品 ブロードキャスト 動画 ニュース ガイド レビュー

Project CARS

ストアページ
データを表示:
グローバル実績
Project CARS > 総合掲示板 > トピックの詳細
Zarian 2015年5月6日 17時59分
Logitech driving force GT
Hey everyone. I can't get the pedal on my driving for GT to work in Project cars. Windows (8.1) does see them as when I go to control panel and controller settings the brake and acceleration cause the Y axis to change.

I do not have the logitech software installed though, but all other buttons seem to workwith Project cars.

Any help would be great.
< >
16-30 / 31 のコメントを表示
SternLX 2015年5月7日 2時59分 
{PHSN} Unkill Bear の投稿を引用：
Got the same problem as OP. I've followed your instructions so far DropnFbombs (thx for suggestions), but it still reports the Brake as "centre undefined". If anyone else has any suggestions please let me know! I'd love to be able to slow down before corners....
That's usually what happens when you select Combined Pedals. Have you ran the Calibrate feature built into the Game Controllers panel in Windows?
#16
{PHSN} Unkill Bear 2015年5月7日 3時13分 
SternLX の投稿を引用：
That's usually what happens when you select Combined Pedals. Have you ran the Calibrate feature built into the Game Controllers panel in Windows?

I had selected Logitech Driving Force GT, Separate Pedals. I have since found the solution - thanks to everyone for their suggestions.

The answer was that the Brake settings are set by default to "Joy Axis -Rz", instead of "Joy Axis +Y". To correct this:

- select controller as Logitech Driving Force GT Seperate Pedals
- go into Edit Assignments, under "Brake" it will say "Joy Axis -Rz"
- click on "Brake" to edit the assigned button.
- when it prompts you to select the new Brake button, stand on your Brake pedal for 5 seconds.
- your Brake should now say "Joy Axis +Y"
- go into Calibrate and calibrate the Brake & Throttle pedals
- click Finish, then Save

Hope this helps anyone who struggles with this problem.

Cheers,
:car::car: UB :car::car:
#17
Del-Dredd 2015年5月7日 3時21分 
If you had checked under Devices and Printers in Windows Control Panel etc.

Select your wheel and go to its options, you could have set pedals as seperate there and probably not had the issue in the first place. You set your wheel rotation and overall effects strength there as well. The rest is normally left at 0 for any good Sim.

Spring, Damper and Centering Spring only give fake force and used in arcade games.

No need for Logitech or other Profiler as they seem to cause issues with the game in any case for some, ie game locks up.
最近の変更はDel-Dreddが行いました; 2015年5月7日 3時22分
#18
GTsimms 2015年5月7日 4時11分 
The only issue here is on a 10 or 15 Lap Karting Race. The wheel goes from 270 to 900 degrees randomly.
#19
discombobulated1 2015年5月7日 4時16分 
G27 wont recongise my pedals only the excellerator and then its on full. the menus go mad for me but think thats because it wont set up. ive tryed all the config stuff suggested no joy if you solve your issue please share
#20
Zarian 2015年5月7日 5時19分 
SternLX の投稿を引用：
DropnFbombs の投稿を引用：

Lol no problem. The menu is a little unconventional and crowded. To be honest I don't see the exit button either!
It's where every Window App has an exit button. UPPER RIGHT CORNER. Big Phat X

I don't recall seeing an X, seriously I was looking there too when i did see a EXIT option in the rest of the interface. I'll have to check when I get home.
最近の変更はZarianが行いました; 2015年5月7日 5時21分
#21
discombobulated1 2015年5月7日 5時54分 
go to the troubleshoot section on steam find my thread the dev helped me set my peddles up
#22
CustomInternals 2015年5月7日 6時03分 
My pedals didn't work at first either. I had the combines pedals selected and you need to select the profile for the DFGT with seperate pedals.
#23
Apokalypt 2015年5月8日 5時00分 
♥♥♥♥♥♥♥ pc gaming. You can`t get ♥♥♥♥ to work. For everything you need to search hours and hours...
I plugged my wheel in, started game, everything was ok, except the problem with the brakes. So I changed the assignment and now my throttle won`t work anymore (won`t even recognize the throttle in the assignments). So I tried to install the Logitech Profiler, but I can`t install it. It always skips the installing part. And the internet isn`t a great help either.
♥♥♥♥♥♥♥ ♥♥♥♥♥♥♥♥...
#24
discombobulated1 2015年5月8日 7時26分 
Apokalypt の投稿を引用：
♥♥♥♥♥♥♥ pc gaming. You can`t get ♥♥♥♥ to work. For everything you need to search hours and hours...
I plugged my wheel in, started game, everything was ok, except the problem with the brakes. So I changed the assignment and now my throttle won`t work anymore (won`t even recognize the throttle in the assignments). So I tried to install the Logitech Profiler, but I can`t install it. It always skips the installing part. And the internet isn`t a great help either.
♥♥♥♥♥♥♥ ♥♥♥♥♥♥♥♥...
go to the troubleshoot part on staem look 4 my thread i imagine u might have the same prob as me mines good now. if it dont help you ask in that section the dev helped me and he was fast
#25
gio_vtec 2015年5月8日 7時44分 
i had a problem installing the gaming software at first,, (it was my bad) but make sure just to select OS then 32 or 64 it work well for me, and i run Pcars from Gaming software, some how i can feel strong force feedback than just the force feedback from Pcars

http://support.logitech.com/product/driving-force-gt
#26
Apokalypt 2015年5月8日 7時51分 
giovtec08 の投稿を引用：
i had a problem installing the gaming software at first,, (it was my bad) but make sure just to select OS then 32 or 64 it work well for me, and i run Pcars from Gaming software, some how i can feel strong force feedback than just the force feedback from Pcars

http://support.logitech.com/product/driving-force-gt

♥♥♥♥♥♥♥♥♥, thank you. I re-downloaded it again, this time it really took the 64 bit file, and the installation worked.
#27
gio_vtec 2015年5月8日 8時32分 
good to hear that!~

Cheers!!~~~
#28
Zarian 2015年5月9日 6時04分 
{PHSN} Unkill Bear の投稿を引用：
SternLX の投稿を引用：
That's usually what happens when you select Combined Pedals. Have you ran the Calibrate feature built into the Game Controllers panel in Windows?

I had selected Logitech Driving Force GT, Separate Pedals. I have since found the solution - thanks to everyone for their suggestions.

The answer was that the Brake settings are set by default to "Joy Axis -Rz", instead of "Joy Axis +Y". To correct this:

- select controller as Logitech Driving Force GT Seperate Pedals
- go into Edit Assignments, under "Brake" it will say "Joy Axis -Rz"
- click on "Brake" to edit the assigned button.
- when it prompts you to select the new Brake button, stand on your Brake pedal for 5 seconds.
- your Brake should now say "Joy Axis +Y"
- go into Calibrate and calibrate the Brake & Throttle pedals
- click Finish, then Save

Hope this helps anyone who struggles with this problem.

Cheers,
:car::car: UB :car::car:


This worked perfectly!
#29
aaronwu0804 2016年6月5日 11時17分 
I got same problem and I follow the instructions below, it fixed, thank you.

{PHSN} Unkill Bear の投稿を引用：
SternLX の投稿を引用：
That's usually what happens when you select Combined Pedals. Have you ran the Calibrate feature built into the Game Controllers panel in Windows?

I had selected Logitech Driving Force GT, Separate Pedals. I have since found the solution - thanks to everyone for their suggestions.

The answer was that the Brake settings are set by default to "Joy Axis -Rz", instead of "Joy Axis +Y". To correct this:

- select controller as Logitech Driving Force GT Seperate Pedals
- go into Edit Assignments, under "Brake" it will say "Joy Axis -Rz"
- click on "Brake" to edit the assigned button.
- when it prompts you to select the new Brake button, stand on your Brake pedal for 5 seconds.
- your Brake should now say "Joy Axis +Y"
- go into Calibrate and calibrate the Brake & Throttle pedals
- click Finish, then Save

Hope this helps anyone who struggles with this problem.

Cheers,
:car::car: UB :car::car:
#30
< >
16-30 / 31 のコメントを表示
ページ毎: 1530 50

Project CARS > 総合掲示板 > トピックの詳細
投稿日: 2015年5月6日 17時59分
投稿数: 31

ルールとガイドライン