DCS 2.8.0.32235.1 Fix patch

[bignewy]

https://www.digitalcombatsimulator.com/en/news/changelog/openbeta/2.8.0.32235.1/

DCS 2.8.0.32235.1

DCS World
Network protocol version changed.
Fixed CTD while conversing with JTAC.
Aircraft shadows appear overlapping models and duplicated - fixed.
VR Kneeboard waypoint pages show battery page - fixed.
Fixed crash caused by shooting train that was placed via ME.
Fixed dedicated server crash when client uses smoke rockets.
Aircraft at Senaki Hold for 15+ mins before taking off - fixed.
Сombined arms crash - fixed.

DCS: F-16C Viper by Eagle Dynamics
Fixed: HARM Target handed off in HAS mode gets frozen relative to missile's seeker boresight
Updated ACM BORE HMCS logic. Hold TMS Forward to slave radar to HMCS line-of-sight and display the ellipse. When TMS Forward is released, the radar will attempt to lock the nearest contact within the ellipse out to 10 nm.

DCS: Mi-24P Hind by Eagle Dynamics
Fixed: gear automatically deploying in some cases when multicrew is used (Petrovich shenanigans).

DCS: Black Shark 2 by Eagle Dynamics (Features added in last patch DCS 2.8.0.32066 Open Beta 2022-10-28 but not mentioned)
Changes in the flight dynamics model include the implementation of the engine gas-dynamic instability during rocket launch from the inboard launchers, at hover, and at low speeds. This is due to hot rocket gases sucked in the air intakes, which can lead to a thrust drop, surge, and shutdown of the engines.
Added delay up to 2 seconds for ATGM Vikhr launch sequence.
SHKVAL screen textures changed to achieve more authentic “green” look

DCS: SA-342 by Polychop Simulations
Added functionality to ripple switch on weapons panel

DCS: JF-17 by Deka Ironwork Simulations
New: Brand new integrated configuration panel GUI
Apply laser code change, DTC config, AAR probe install/remove etc by one click
Open it via radio menu -> ground crew -> configuration panel
Added: campaign mission 11 and 12. Now campaign is completed

DCS: AV-8B by Razbam
Fixed:  Dedicated server crash when the aircraft dumps fuel
F10 MAP designation rework.
a. Now it is not required to create an unlabeled Marker. Marker Label must now say '#TPn' where  n is a number. 
b. In MP environment it will only load the Markers created by the pilot.
Added: New mode for Offset input in the Mission Editor. Please check the forum for a more detailed explanation.

DCS: M-2000C by Razbam
Fixed: Dedicated server crash when the aircraft dumps fuel

DCS Mirage F1 by Aerges
Systems:

Complete autopilot rework (BIP trim fix will be included in next update):
AP is now less aggressive in altitude hold mode.
Included radionavigation G and R modes that allow interception of a radial and following an ILS approach.
Corrected AP engagement and mode logic, as well as light logic.
Route commutation unit selected radial no longer affects ILS.
Artificial horizon radionavigation bars behaviour adjusted according to manuals.
Backup ADI bank index now animated (pending to fix incorrect bank indication).
IDN distance selector can no longer exceed its limits.
IDN: In TT and TE modes, now the narrow needle does not move with the rest of the IDN assembly
Fixed radio presets not allowing integers.

3D model:

Updated EQ liveries for Iraq.
Fixed missile floating when the wing is damaged.

[-OrLoK- Слава Україн]

excellent.

[TENƎT]

this is for good

[[IPL]Vino]

so I guess mixed language ka-50 cockpit broken by previous patch will stay with us longer huh....

[LordBane]

JF17 GUI dont Work!!

[Troll Norris]

Ursprünglich geschrieben von LordBane:

JF17 GUI dont Work!!

JF-17 is 3rd party module developed by Deka Ironwork Simulations. You have to contact the 3rd party developer when there is problem with their product.

https://forum.dcs.world/forum/626-bugs-and-problems/

[bignewy]

Ursprünglich geschrieben von IPLVino:

so I guess mixed language ka-50 cockpit broken by previous patch will stay with us longer huh....

as we fix stuff it gets added to the patches. We could only work on so much in the limited time we had, further patches to follow in the future

[bignewy]

Ursprünglich geschrieben von LordBane:

JF17 GUI dont Work!!

Please remove any unofficial mods if any and run a verify in steam

[bazzalb]

Any news on the VR FPS drop-off with VR?

[AndréNL]

Ursprünglich geschrieben von bazzalb:

Any news on the VR FPS drop-off with VR?

Nope, well....not for me. Still FUBAR

[bignewy]

If you are still experiencing issues

Remove all unofficial mods or edits if any ( including shader mods )
run a verify in steam
delete metashader2 and fxo folders in saved games dcs folder ( dcs will create new ones, first load will take longer while shaders are created )

If you still experience issues we will need to see your dcs log and a track replay of the problem and your system spec and settings.
you can post on the official forum to attach the items or visit us on our discord

https://forum.dcs.world/forum/253-bugs-and-problems/
https://discordapp.com/invite/eagledynamics

[AndréNL]

Ursprünglich geschrieben von bignewy:

If you are still experiencing issues

Remove all unofficial mods or edits if any ( including shader mods )
run a verify in steam
delete metashader2 and fxo folders in saved games dcs folder ( dcs will create new ones, first load will take longer while shaders are created )

If you still experience issues we will need to see your dcs log and a track replay of the problem and your system spec and settings.
you can post on the official forum to attach the items or visit us on our discord

https://forum.dcs.world/forum/253-bugs-and-problems/
https://discordapp.com/invite/eagledynamics

I did all yesterday.
This morning put a lot of time in it. No positive aspects here.

Gonna roll back to 2.5, fingers crossed in what state the ah64 is.

[spike2071]

Ursprünglich geschrieben von AndréNL:

Ursprünglich geschrieben von bignewy:

If you are still experiencing issues

Remove all unofficial mods or edits if any ( including shader mods )
run a verify in steam
delete metashader2 and fxo folders in saved games dcs folder ( dcs will create new ones, first load will take longer while shaders are created )

If you still experience issues we will need to see your dcs log and a track replay of the problem and your system spec and settings.
you can post on the official forum to attach the items or visit us on our discord

https://forum.dcs.world/forum/253-bugs-and-problems/
https://discordapp.com/invite/eagledynamics

I did all yesterday.
This morning put a lot of time in it. No positive aspects here.

Gonna roll back to 2.5, fingers crossed in what state the ah64 is.

The Apache requires 2.7.11. There is no AH-64 in 2.5.

[AndréNL]

Ursprünglich geschrieben von spike2071:

Ursprünglich geschrieben von AndréNL:

I did all yesterday.
This morning put a lot of time in it. No positive aspects here.

Gonna roll back to 2.5, fingers crossed in what state the ah64 is.

The Apache requires 2.7.11. There is no AH-64 in 2.5.

At this point....... I want my teddybear!

[spike2071]

Ursprünglich geschrieben von AndréNL:

Ursprünglich geschrieben von spike2071:

The Apache requires 2.7.11. There is no AH-64 in 2.5.

At this point....... I want my teddybear!

Lol, sorry.

I assume you tried this, but in case you haven't....did you try turning off Terrain Shadows? I read that it's bugged in 2.8 and kills your FPS if you have Flat enabled for Terrain Shadows. You said everything was already set to min, but thought I'd mention it.

[bignewy]

Ursprünglich geschrieben von AndréNL:

Ursprünglich geschrieben von spike2071:

The Apache requires 2.7.11. There is no AH-64 in 2.5.

At this point....... I want my teddybear!

If you want help I will need to see your data you can reach me in discord in the link above.

thanks