2000 Ship

[Dag]

How are you supposed to get these? I used the saw to cut both the anchors on each side. If you try and cut the pieces that turn red (Which is the floor it's on), it just destroys.

https://imgur.com/a/GE233qx

[Twinsen]

Yup same issue on "Aramano Adrianii" front section.

Both generators cannot be lifted stating the floor they're on as obstacle:
https://steamcommunity.com/sharedfiles/filedetails/?id=3023025583
https://steamcommunity.com/sharedfiles/filedetails/?id=3023025546

Also in the same section could not target a rivet with a hammer (on both symmetrical panels):
https://steamcommunity.com/sharedfiles/filedetails/?id=3023028526

[Twinsen]

Also there seem to be several sections in the back of the ship (deck level) that can't be dislodged from the hull of the ship and explosives seem to be the only way to do it.

[Black Heart]

i used explosives for the front of the ship to get it done, on the back i haven't tried yet.

[Fenrir_Grauwolf]

I have the same Problem, Explosives doesn't work because they destroy the generators

[Torklan]

Yea, all the Tier 3 ships are broken. The cross beams are not flagged as dependent on the floors or walls. Which leave a bunch of them floating in the air at places difficult or unable to get too.

Edit - FYI because that room design is copied on multiple of the Tier 3 ships you should know this. If you place an explosive on the deck of the ship directly above the fuse panel it will only break the floor down so you can turn off the power without destroying anything.

[Dag]

I noticed for the back section there are 3 floor deck panels i had to use explosions on to clear. No visible rivets to hit. The front portion there is overlap from the walls. If you tear those down with the cables. You can then hit the rivets that were over lapped. But of course explosions work as well. Same with the front left crane-able cross section, if looking from front to back. Too lazy to look up the nautical term haha. I had to remove the side panel to get the crane to accept it could grab that. You can see visible overlap on that top deck piece and the top of the cross section.