FSR 3.1 FG when using DLSS?

[Mr.SkuLL]

The main point of FSR 3.1 is that you can use the Frame Generation with other scalers, why can't I use it with DLSS now? DLSS in this game looks so much better and FSR3.1+FG for some strange reason just stutters all over the place.

[Zerberus]

Modify Engine.ini, add r.FidelityFX.FI.Enabled=1 under [SystemSettings] block, select DLSS in game, set FPS lock to 30. Should work for stable 60.

[Gurlokovich]

With this mode FG works with anything, you don’t even need dlss, juste press F3 in game 2 times, with a fps counter it’s easy to see. F1 toggle RayTracing F2 ray reconstruction F4 RTAO F5 vignettes F6 Dlss level F7 toggle Fog on off F8 deep of field F9 3 level of SSR

https://www.nexusmods.com/silenthill2/mods/24

[darkjairo29]

FG AMD not working in the game

[Mr.SkuLL]

Originally posted by Gurlokovich:

With this mode FG works with anything, you don’t even need dlss, juste press F3 in game 2 times, with a fps counter it’s easy to see. F1 toggle RayTracing F2 ray reconstruction F4 RTAO F5 vignettes F6 Dlss level F7 toggle Fog on off F8 deep of field F9 3 level of SSR

https://www.nexusmods.com/silenthill2/mods/24

This mod's frame generation works with uncapped fps right?

[Mr.SkuLL]

Originally posted by Zerberus:

Modify Engine.ini, add r.FidelityFX.FI.Enabled=1 under [SystemSettings] block, select DLSS in game, set FPS lock to 30. Should work for stable 60.

yeah, I can get 60, Im trying to get to 120fps using Ultra Graphics, I'll probably be able to get there using FG of some kind, but current FSR AA is trash in this game...Never seen a big difference in a game between FSR3 and DLSS except for this one

[Zerberus]

Originally posted by Mr.SkuLL:

Originally posted by Zerberus:

Modify Engine.ini, add r.FidelityFX.FI.Enabled=1 under [SystemSettings] block, select DLSS in game, set FPS lock to 30. Should work for stable 60.

yeah, I can get 60, Im trying to get to 120fps using Ultra Graphics, I'll probably be able to get there using FG of some kind, but current FSR AA is trash in this game...Never seen a big difference in a game between FSR3 and DLSS except for this one

No matter what mod you use, with fg fsr you'll get hiccup stutters and broken textures all the time if you play with fps more than 60
Tested myself
Not sure if that works with nvidia fg, bet not
However, getting solid 60 with fg on ultra with dlss enabled is the best option for those who dont have 40 rtx cards
I advice you not to waste your time and get used to the option i said before
If you ignore, after many wasted hours you'll get to that point by yourself

[Zerberus]

Ultra plus is a joke. Doesn't make a difference at all
Tried to acrivate it by both ways, by direct and with Vortex MM

[Gurlokovich]

Originally posted by Mr.SkuLL:

Originally posted by Gurlokovich:

With this mode FG works with anything, you don’t even need dlss, juste press F3 in game 2 times, with a fps counter it’s easy to see. F1 toggle RayTracing F2 ray reconstruction F4 RTAO F5 vignettes F6 Dlss level F7 toggle Fog on off F8 deep of field F9 3 level of SSR

https://www.nexusmods.com/silenthill2/mods/24

This mod's frame generation works with uncapped fps right?

Yes right now with 7900 xtx I’m using FG + AFMF2 without FSR I’m getting around 180-200 fps but it run smooth if I lock the frame at 30 FPS in game but in real I’m getting 120 30 to 60 because of FG then AFMF2 double my 60 to 120. It should work because it was a stuttering mess with black myth wukong but with this mod it let me use FG without FSR.

[Gurlokovich]

Originally posted by Mr.SkuLL:

Originally posted by Zerberus:

Modify Engine.ini, add r.FidelityFX.FI.Enabled=1 under [SystemSettings] block, select DLSS in game, set FPS lock to 30. Should work for stable 60.

yeah, I can get 60, Im trying to get to 120fps using Ultra Graphics, I'll probably be able to get there using FG of some kind, but current FSR AA is trash in this game...Never seen a big difference in a game between FSR3 and DLSS except for this one

If the mod doesn’t work for you, and you have to use FSR to enable FG, what I use to do before to get a clean picture was this:

Put your game in FSR Quality plus FG save your game and exit. Not put that line in your engine.ini

r.FidelityFX.FSR3.QualityMode=O

Load your game without touching FSR it going to put you in FSR NativeAA which is a better picture then normal 4K at a 10 to 15 % less fps but FG will Compensate in this FSR level there’s no super sampling happening so no ghosting or all the bad pictures quality of FSR Quality.

[Gurlokovich]

Originally posted by Zerberus:

Ultra plus is a joke. Doesn't make a difference at all
Tried to acrivate it by both ways, by direct and with Vortex MM

If I use vortex to install the mod, the game crash. If I put the .pak file directly in the
SILENT HILL 2\SHProto\Content\Paks
Folder it work. But if you really wanna see if it work put the file there manually start the game, load your saved file then exit. Go look inside
SILENT HILL 2\SHProto\Binary\win64 if the mod worked correctly it will have created a couple files one called Ultraconfig.ini if I remember correctly
This is where your choice for F1 F2 F3… are saved if you saved them in game by pressing F11. It didn’t work for me also a couple versions before the last one that came out a few days ago.

And some of her version didn’t seem to gave me any kind of performance boost, but I had so many mods or UE variables inputs in my engine.ini that I couldn’t tell if it was actually doing anything.

I’ve uninstalled everything, the game itself then put my settings where I usually put then at. Loaded a saved and looked at my fps it was at 85~89 installed the last version of the mods loaded the same save right away I was at 110 ~ 115, I then pressed F1 the game froze for 2 seconds my fps when down to 80~85 I’ve just activated RT. Then pressed F3 I went further down at 35~40 I had deactivated FG.

Since the game was running better I tried running the game with XeSS and AFMF2, cause it look better this way and i get a good 100 fps, I’ve pressed F3 nothing happened but I don’t know why F3 is the only one that I have to press it 2 times to activate it but I my fps now where at 190 at thought it was not possible, so after that I tried it with no super sampling and it worked OMG.


The only little downside side is every time I load the the game my saved configuration of her mod don’t seem to save, and I have to fix all the fonction from F1 to F9


F9 specifically if set on her ultra preset is very GPU demanding you have to cycle between 3 settings and and depending of you location in the game it can be hard to tell which one you are using. I keep I FPS counter and look at it while changing the options.

[v100dragon]

Originally posted by Gurlokovich:

Originally posted by Zerberus:

Ultra plus is a joke. Doesn't make a difference at all
Tried to acrivate it by both ways, by direct and with Vortex MM

If I use vortex to install the mod, the game crash. If I put the .pak file directly in the
SILENT HILL 2\SHProto\Content\Paks
Folder it work. But if you really wanna see if it work put the file there manually start the game, load your saved file then exit. Go look inside
SILENT HILL 2\SHProto\Binary\win64 if the mod worked correctly it will have created a couple files one called Ultraconfig.ini if I remember correctly
This is where your choice for F1 F2 F3… are saved if you saved them in game by pressing F11. It didn’t work for me also a couple versions before the last one that came out a few days ago.

And some of her version didn’t seem to gave me any kind of performance boost, but I had so many mods or UE variables inputs in my engine.ini that I couldn’t tell if it was actually doing anything.

I’ve uninstalled everything, the game itself then put my settings where I usually put then at. Loaded a saved and looked at my fps it was at 85~89 installed the last version of the mods loaded the same save right away I was at 110 ~ 115, I then pressed F1 the game froze for 2 seconds my fps when down to 80~85 I’ve just activated RT. Then pressed F3 I went further down at 35~40 I had deactivated FG.

Since the game was running better I tried running the game with XeSS and AFMF2, cause it look better this way and i get a good 100 fps, I’ve pressed F3 nothing happened but I don’t know why F3 is the only one that I have to press it 2 times to activate it but I my fps now where at 190 at thought it was not possible, so after that I tried it with no super sampling and it worked OMG.


The only little downside side is every time I load the the game my saved configuration of her mod don’t seem to save, and I have to fix all the fonction from F1 to F9


F9 specifically if set on her ultra preset is very GPU demanding you have to cycle between 3 settings and and depending of you location in the game it can be hard to tell which one you are using. I keep I FPS counter and look at it while changing the options.

As a quick heads-up - after you choose your settings with the UltraPlus mod, press F11 to save it to the config file. The next time you load the game (with mod installed), press F12 and that will re-load everything saved!

[Gurlokovich]

Originally posted by v100dragon:

Originally posted by Gurlokovich:

If I use vortex to install the mod, the game crash. If I put the .pak file directly in the
SILENT HILL 2\SHProto\Content\Paks
Folder it work. But if you really wanna see if it work put the file there manually start the game, load your saved file then exit. Go look inside
SILENT HILL 2\SHProto\Binary\win64 if the mod worked correctly it will have created a couple files one called Ultraconfig.ini if I remember correctly
This is where your choice for F1 F2 F3… are saved if you saved them in game by pressing F11. It didn’t work for me also a couple versions before the last one that came out a few days ago.

And some of her version didn’t seem to gave me any kind of performance boost, but I had so many mods or UE variables inputs in my engine.ini that I couldn’t tell if it was actually doing anything.

I’ve uninstalled everything, the game itself then put my settings where I usually put then at. Loaded a saved and looked at my fps it was at 85~89 installed the last version of the mods loaded the same save right away I was at 110 ~ 115, I then pressed F1 the game froze for 2 seconds my fps when down to 80~85 I’ve just activated RT. Then pressed F3 I went further down at 35~40 I had deactivated FG.

Since the game was running better I tried running the game with XeSS and AFMF2, cause it look better this way and i get a good 100 fps, I’ve pressed F3 nothing happened but I don’t know why F3 is the only one that I have to press it 2 times to activate it but I my fps now where at 190 at thought it was not possible, so after that I tried it with no super sampling and it worked OMG.


The only little downside side is every time I load the the game my saved configuration of her mod don’t seem to save, and I have to fix all the fonction from F1 to F9


F9 specifically if set on her ultra preset is very GPU demanding you have to cycle between 3 settings and and depending of you location in the game it can be hard to tell which one you are using. I keep I FPS counter and look at it while changing the options.

As a quick heads-up - after you choose your settings with the UltraPlus mod, press F11 to save it to the config file. The next time you load the game (with mod installed), press F12 and that will re-load everything saved!

Thx man I knew I was doing something wrong!