Old Version / LEGACY Version available

[veeyooh]

If you have any issues with the new update comparing to the Legacy version, please describre it here, it will help us to solve your issues.

You can have access to the older version (before the update) by :

> going into the TRYP FPV settings from the game's STEAM page.
> choose "Properties"
> select "Beta "
> top right, select the "Legacy version" and launch the download.

Have a great fly !

[GOATER]

Hello. Thank you for making very nice game. I am using JUMPER T-20. Why the 2 position switch ( and all switches and buttons) on my controller doesn't work TWICE in one map? I turn the switch on, and the drone is armed. I turn it off, but the drone is still arming. Left and Right sticks can maneuver drones even though that switch thing happens. I want to fly without touching keyboard .

[myst0001]

Hello, using DJI FPV 2, the legacy does not work either, i'ts even worse. Going to calibrate the controller, I have the following :
1) the throttle zero is set up
2) the pitch zero is set up (and is either full up or full down when moving later)
3) none of the invert checkboxes toggles anything, the interface ignores the click and never dispalys a checkboc or adds it
i'd add a screenshot if i could

[veeyooh]

Originally posted by myst0001:

Hello, using DJI FPV 2, the legacy does not work either, i'ts even worse. Going to calibrate the controller, I have the following :
1) the throttle zero is set up
2) the pitch zero is set up (and is either full up or full down when moving later)
3) none of the invert checkboxes toggles anything, the interface ignores the click and never dispalys a checkboc or adds it
i'd add a screenshot if i could

you can do it on discord about screen shot

I suggest to move out the .sav, they are in appdata/local/trypfpv, it will reset all setting, tell me if it work

(important : be sure your DJI FPV 2 controller is up to date with DJI software)

[veeyooh]

Originally posted by GOATER:

Hello. Thank you for making very nice game. I am using JUMPER T-20. Why the 2 position switch ( and all switches and buttons) on my controller doesn't work TWICE in one map? I turn the switch on, and the drone is armed. I turn it off, but the drone is still arming. Left and Right sticks can maneuver drones even though that switch thing happens. I want to fly without touching keyboard .

isn't it because it's working only in one way ? i mean going -100 to 100 would work, and 100 to -100 wouldn't ? please confirm

[Belly]

My Taranis X9 Lite disconnect everytime I came from a menu

[myst0001]

Originally posted by veeyooh:

Originally posted by myst0001:

Hello, using DJI FPV 2, the legacy does not work either, i'ts even worse. Going to calibrate the controller, I have the following :
1) the throttle zero is set up
2) the pitch zero is set up (and is either full up or full down when moving later)
3) none of the invert checkboxes toggles anything, the interface ignores the click and never dispalys a checkboc or adds it
i'd add a screenshot if i could

you can do it on discord about screen shot

I suggest to move out the .sav, they are in appdata/local/trypfpv, it will reset all setting, tell me if it work

(important : be sure your DJI FPV 2 controller is up to date with DJI software)

It works fine on legacy now. Thank you.

I will check now if this trick works also on the current version.

[veeyooh]

Originally posted by myst0001:

Originally posted by veeyooh:

you can do it on discord about screen shot

I suggest to move out the .sav, they are in appdata/local/trypfpv, it will reset all setting, tell me if it work

(important : be sure your DJI FPV 2 controller is up to date with DJI software)

It works fine on legacy now. Thank you.

I will check now if this trick works also on the current version.

yes please let me know

[GOATER]

Originally posted by veeyooh:

Originally posted by GOATER:

Hello. Thank you for making very nice game. I am using JUMPER T-20. Why the 2 position switch ( and all switches and buttons) on my controller doesn't work TWICE in one map? I turn the switch on, and the drone is armed. I turn it off, but the drone is still arming. Left and Right sticks can maneuver drones even though that switch thing happens. I want to fly without touching keyboard .

isn't it because it's working only in one way ? i mean going -100 to 100 would work, and 100 to -100 wouldn't ? please confirm

I am newbie so I don't know technical words and others. The switch that I meant is 2 position (on and off) not momentary switch. I flick that up the screen on the controller shows 100, and down -100. Shouldn't it work in the opposite way?
In real fpv flying, the pilot uses that switch as arm and disarm, so I thought my switches might can be.. I didn't know in the legacy version because I checked Auto arm then. And after the update, all setups are reset then I know manual arming doesn't work.

[cdl]

With the new version, it became unplayable for me. FPS is below 20 and sound is choppy. Lowering the resolution or quality of graphics doesn't change anything, nor does starting with directX.
With the previous version I could play around 35 FPS in high quality.
My laptop is not very recent however: Intel i7-7700, Nvidia GTX 1050, and 32GB of RAM

[veeyooh]

Originally posted by cdl:

With the new version, it became unplayable for me. FPS is below 20 and sound is choppy. Lowering the resolution or quality of graphics doesn't change anything, nor does starting with directX.
With the previous version I could play around 35 FPS in high quality.
My laptop is not very recent however: Intel i7-7700, Nvidia GTX 1050, and 32GB of RAM

would you accept and would have some time to make some test of performance to understand what is hapening ?
if yes just come on discord ask for a #performance issue access
thank yo uvery much

[BartX_PL]

Hello, i have problem witch choppy sound too. It is most often in main menu and races. In races there is also much fps drops.
Usually on free flight, challanges and scenarios flights is everything good.
I tried also Legacy mode and it was working well.
My PC: AMD Ryzen 7 2700, RTX 3050, 32 GB RAM

[cerigent]

我是新手玩家，平时玩这游戏只是为了解压。我遇到的问题：angle模式下，右手的两个轴的作用与其他模式是反的，有时候我想短暂尝试一下其他模式，每次这样做就要把我的那两个轴反转。物理引擎太逼真了，导致angle下画面抖动很大，我不是去练习飞行的只是享受风景解压的。我之前更新了，没有找到返回旧版本的方法，希望你们能解决。

[GOATER]

Legacy: I could connect controller (Jumper T-20) when ever I want play even during the game.
Updated: I should turn it on and connect to PC before I click the Green Play button in STEAM launcher.

[alex@hangtime]

Hi, not a technical person so apologies but i have a repeatable crash, occurs whenever i go to "drone" in any of the menus the game crashes and message "fatal error" comes up.
Great otherwise, loving it

thanks

Alex

[Mqrius]

Found one!

In the new version, if I switch to Angle mode, the pitch gets inverted compared to Acro mode. This makes it impossible to switch between Angle and Acro mode during flight without going into the controller settings.

In the legacy version it works correctly.