Can't Un-Invert My Pedals: Controller Calibration Broken?

[bhoenigmann]

Dakar recognizes my wheel (Logitech G Pro) and pedals (Fanatec Clubsport 3) and the controller calibration routine shows my pedal axes as inverted. (After some searching, I did manage to "un-invert" them - but only on the calibration screen.)

While that's all fine, there is apparently no way that works (at least that I can see) to carry over that "un-inverted" setting for the pedals when you drive. IOW, the pedal axes go back to "inverted" when you hop in the vehicle.

Maybe I'm doing some thing wrong? (If so, a step-by-step set of instuctions would be helpful.)

Or is the controller calibration routine still broken?

[espen.torgersen]

I am seeing the same behavior today.

[Normlinde]

i had the same prob with my brake pedal, i can managed it to bind onetime the brakes on the gas pedal in the devicewizard and then you can bind it correctly in my case and the inverted problem was gone, also got fanatec pedals

[bhoenigmann]

Hey guys - Sorry that you're having the same problems as me, But I got it working now!

Very Weird, but try calibrating your pedal axes WHILE HOLDING DOWN YOUR CLUTCH PEDAL! That did it for me. Note that I haven't yet dialed in the FFB, Linearity, Saturation etc yet, but the wheel and peds now work as expected!

I still can't return to Windows without going thru Task Manager though...

Good Luck!

[TomGoodwrenchSK]

Another important thing for wheel calibration - have the game in FULLSCREEN mode ! Not Windowed, not Borderless. If you try anything other than in Fullscreen it will flicker at always 100%.

[amendes]

Hello everyone,
If you are still experiencing issues with the Fanatec ClubSport 3 pedals, could you please send the device config file created by the calibration to [e-mail]?
It should be on [MAIN_DISK]\Users[WINDOWS_USERNAME]\AppData\Local\Dakar2Game\Saved\SteeringWheelConfigs and it should be called User 3767 6203.json.

You can send all config files on that folder, if you want.

[nicovb1]

I had the same problem. Finally solved it by editing the mentioned config file.
Setting the inverter to true or false did nothing.
I swapped the values at min and max 4 all 4 axe configs of the pedal config file.
So 0 to 65535.
And 65535 to 0.

[Pollinflas]

CSW 2.5 Here. Incredible, almost 2 hours trying to make my steering wheel work, and nothing worked. Unbelievable.