How to play Dragon Ball Sparking Zero in Ultrawide (21:9) mode & 120FPS+

[HANZ64]

Dragon Ball Sparking Zero Ultrawide (21:9) Hack Steps:

1. Download “UUU_v530” from here: https://kemono.su/patreon/user/37343853/post/83234146
Alternative Download Link 1: https://drive.proton.me/urls/RGZ82VAA2G#sVys98sMaKJT
Alternative Download Link 2: https://n2.kemono.su/data/da/fa/dafa1ce3480c069a5f185586ef4a15b04529e2d7bdfe7961dbc03697499329fd.zip?f=UUU_v530.zip

2. Place the “UUU_v530” zip file in a new folder and extract it.

3. Open up Dragon Ball Sparking Zero on Steam.

4. Once the game has fully loaded up into the menu screen open up “IGCSClient” in the new folder that you extracted all the files to.

5. You will now see a “Universal Unreal Engine 5 Unlocker” window and be on the General > Game process and DLL section. From here where it says “Game process to inject into” click on select and select your open instance of Dragon Ball Sparking Zero (the “DLL to inject” section should already be assigned to “.\UniversalUE5Unlocker.dll” - if it’s not you can manually select this from your extracted folder).

6. Click on “Inject DLL” for the first time your game will crash (this is normal).

7. Open up Dragon Ball Sparking Zero on Steam again and then proceed to open up “IGCSClient” and then click on “Inject DLL” - this time you should see the “Initialisation Complete” message on the top left corner of your screen (I noticed this works best if done as soon as possible ideally when the "Bandai Namco" white screen appears after you launch the game).

8. Congratulations! You now can play this game in ultrawide mode (if your game crashes again, repeat the previous step until it works).

9. The field of view in the game might be a bit too close now so to fix and adjust this to your liking, click on the tilda “~” key on your keyboard (usually located above the tab key on your keyboard).

10. You should now see a console/terminal interface appear on the bottom of your screen, enter “fov 75” to fix the field of view back to its original state (you can adjust this value to your liking but I found 75 to be close to how it looked like originally if you prefer that).

11. An additional recommended step to avoid issues during gameplay: in your “Universal Unreal Engine 5 Unlocker” window go to "Gamepad button bindings" > Toggle gamespeed override (+ X button) - this is set to the left stick (click) by default, I recommend changing this to the start button so it doesn't accidentally trigger during gameplay.

12. Enjoy the game!

A couple of things to note: I have tested this online and it works perfectly, no issues whatsoever.

If you are worried about getting banned or just want to be extra safe you can always simply open up the game normally if you intend to play online. In order to play this game with widescreen support you will have to follow step 7 each time, so I’m assuming the ultrawide hack doesn’t permanently alter your game files as you will have to actively be running “IGCSClient” alongside your game for their to be any risk of getting banned. So to avoid that risk completely simply open up the game normally if you intend to play online. Though imo I don't think there is any risk here as long as you're not opening up the terminal and messing around with stuff during an online match. I have played many ranked matches online and have had zero issues.

It’s early days so there might be a better method to do this, or even better if they update the game and simply provide ultra wide support like they should have from the very beginning (this game clearly is capable of running on Ultrawide and looks good!).

Also note although I mentioned the "21:9" aspect ratio this should work for any type of widescreen.

Proof: https://drive.google.com/drive/folders/13WUrm-vIQJu-NuFt_a5yIXV6VqedRaQj?usp=sharing

-----

Also if you want higher frame rates follow these guides:
https://www.youtube.com/watch?v=nbH997cXikM
https://www.youtube.com/watch?v=qc3zZEYpfLY

This method allows you to increase the resolution and/or frames of any game you play (regardless of whether they support it natively or not).

Here is the software you will need to make this work:
https://store.steampowered.com/app/993090/Lossless_Scaling/

With this method you can get higher FPS both offline and online for any game (I tested it online with no issues). You can even get higher than 120FPS (up to 240FPS if your monitor supports it). And yes it 100% works alongside the widescreen hack outlined above.

I recommend turning on the "performance" toggle as i did notice some input lag, but toggling this seemed to resolve that. I have an RTX 4070 and am able to get 165FPS with the highest visual settings (which is the max refresh rate of my screen). Here are the settings I'm using on my Lossless Scaling:
https://drive.google.com/file/d/1M3Z5QqlDx0ddUviRUnNt__bH8EVdMqfd/view?usp=sharing

Proof it's working:
https://drive.google.com/file/d/1Qtg858OE3A2gyoMskuobHDEtX0YxJzNP/view?usp=sharing

I hope this helps!

[CrazyFragzzz]

Originally posted by Tamaki:

Step 1: buy a normal monitor

Clown

[Mabaxx]

Thank you very much, works good for me :)
Sometimes I get: gamespeed overwrite 0 and then I need to toggle I back in the App don't know why

[HANZ64]

Originally posted by Mabaxx:

Thank you very much, works good for me :)
Sometimes I get: gamespeed overwrite 0 and then I need to toggle I back in the App don't know why

Hey there, I'm glad it's working for you!

I noticed that by default there are certain gamepad key bindings assigned to the controller e.g. Toggle gamespeed override (+ X button/Square Button). This is assigned to the Left stick (press) by default, which means that if you happen to hit left click (press) and square on your controller you will activate this override (which tends to freeze the gameplay). It happened to me a few times accidentally just by playing the game so I've changed the assignment to the start button so it no longer interferes with the actual gameplay.

[Vantuhh]

using uuu5 but my 43:18 ratio switches back to 2k res instantly, any idea why

[Noxdormus]

Thank you so much ! I was looking a google drive link to download it

[HANZ64]

Originally posted by Vantuhh:

using uuu5 but my 43:18 ratio switches back to 2k res instantly, any idea why

Hi there, I don't have that screen ratio to test out unfortunately, but I recommend checking out the "Hotsampling" settings in the Universal Unreal Engine 5 Unlocker window; it looks like you can customise resolutions and aspect ratios to whatever you require there.

[Asim_Skuggbane]

So i would love to use the mod but if you can get banned in online maybe not too god getting used to using it at all in single player. You think its bannable or we will just have to wait and see?

[Steijn]

just be glad there's no anticheat

[HANZ64]

Originally posted by Asim_Skuggbane:

So i would love to use the mod but if you can get banned in online maybe not too god getting used to using it at all in single player. You think its bannable or we will just have to wait and see?

I'm happy to report that I'm playing ranked online with no issues whatsoever.

[MorningStar]

do we have to inject it each time we launch the game? after I launch it, it resets.

[Legday]

game keeps crashing very time i inject

[Noxdormus]

Originally posted by HANZ64:

Dragon Ball Sparking Zero Ultrawide (21:9) Hack Steps:

1. Download “UUU_v530” from here: https://kemono.su/patreon/user/37343853/post/83234146
Alternative download link: https://drive.proton.me/urls/XTS65HWSBM#ATWEH23pOW4h

2. Place the “UUU_v530” zip file in a new folder and extract it.

3. Open up Dragon Ball Sparking Zero on Steam.

4. Once the game has fully loaded up into the menu screen open up “IGCSClient” in the new folder that you extracted all the files to.

5. You will now see a “Universal Unreal Engine 5 Unlocker” window and be on the General > Game process and DLL section. From here where it says “Game process to inject into” click on select and select your open instance of Dragon Ball Sparking Zero (the “DLL to inject” section should already be assigned to “.\UniversalUE5Unlocker.dll” - if it’s not you can manually select this from your extracted folder).

6. Click on “Inject DLL” for the first time your game will crash (this is normal).

7. Open up Dragon Ball Sparking Zero on Steam again and then proceed to open up “IGCSClient” and then click on “Inject DLL” - this time you should see the “Initialisation Complete” message on the top left corner of your screen (I noticed this works best if done as soon as possible ideally when the "Bandai Namco" white screen appears after you launch the game).

8. Congratulations! You now can play this game in ultrawide mode (if your game crashes again, repeat the previous step until it works).

9. The field of view in the game might be a bit too close now so to fix and adjust this to your liking, click on the tilda “~” key on your keyboard (usually located above the tab key on your keyboard).

10. You should now see a console/terminal interface appear on the bottom of your screen, enter “fov 75” to fix the field of view back to its original state (you can adjust this value to your liking but I found 75 to be close to how it looked like originally if you prefer that).

11. An additional recommended step to avoid issues during gameplay: in your “Universal Unreal Engine 5 Unlocker” window go to "Gamepad button bindings" > Toggle gamespeed override (+ X button) - this is set to the left stick (click) by default, I recommend changing this to the start button so it doesn't accidentally trigger during gameplay.

12. Enjoy the game!

A couple of things to note: I have tested this online and it works perfectly, no issues whatsoever.

If you are worried about getting banned or just want to be extra safe you can always simply open up the game normally if you intend to play online. In order to play this game with widescreen support you will have to follow step 7 each time, so I’m assuming the ultrawide hack doesn’t permanently alter your game files as you will have to actively be running “IGCSClient” alongside your game for their to be any risk of getting banned. So to avoid that risk completely simply open up the game normally if you intend to play online. Though imo I don't think there is any risk here as long as you're not opening up the terminal and messing around with stuff during an online match. I have played many ranked matches online and have had zero issues.

It’s early days so there might be a better method to do this, or even better if they update the game and simply provide ultra wide support like they should have from the very beginning (this game clearly is capable of running on Ultrawide and looks good!).

Also note although I mentioned the "21:9" aspect ratio this should work for any type of widescreen.

I hope this helps!

-----

Proof: https://drive.google.com/drive/folders/13WUrm-vIQJu-NuFt_a5yIXV6VqedRaQj?usp=sharing

I think there is an issue with the files UniversalUE5Unlocker.dll on the google drive, it was a .log extension and not a .dll , not sure if its the issue but after converted the file in .dll the software working but the 21/9 ratio doesn't work

[HANZ64]

Originally posted by MorningStar:

do we have to inject it each time we launch the game? after I launch it, it resets.

Yes that's correct (just follow step 7), it doesn't permanently modify your game files which is a good thing imo. It's pretty quick to launch if you have both the game and "IGCSClient" as shortcuts on your desktop.

[HANZ64]

Originally posted by Noxdormus:

Originally posted by HANZ64:

Dragon Ball Sparking Zero Ultrawide (21:9) Hack Steps:

1. Download “UUU_v530” from here: https://kemono.su/patreon/user/37343853/post/83234146
Alternative download link: https://drive.proton.me/urls/XTS65HWSBM#ATWEH23pOW4h

2. Place the “UUU_v530” zip file in a new folder and extract it.

3. Open up Dragon Ball Sparking Zero on Steam.

4. Once the game has fully loaded up into the menu screen open up “IGCSClient” in the new folder that you extracted all the files to.

5. You will now see a “Universal Unreal Engine 5 Unlocker” window and be on the General > Game process and DLL section. From here where it says “Game process to inject into” click on select and select your open instance of Dragon Ball Sparking Zero (the “DLL to inject” section should already be assigned to “.\UniversalUE5Unlocker.dll” - if it’s not you can manually select this from your extracted folder).

6. Click on “Inject DLL” for the first time your game will crash (this is normal).

7. Open up Dragon Ball Sparking Zero on Steam again and then proceed to open up “IGCSClient” and then click on “Inject DLL” - this time you should see the “Initialisation Complete” message on the top left corner of your screen (I noticed this works best if done as soon as possible ideally when the "Bandai Namco" white screen appears after you launch the game).

8. Congratulations! You now can play this game in ultrawide mode (if your game crashes again, repeat the previous step until it works).

9. The field of view in the game might be a bit too close now so to fix and adjust this to your liking, click on the tilda “~” key on your keyboard (usually located above the tab key on your keyboard).

10. You should now see a console/terminal interface appear on the bottom of your screen, enter “fov 75” to fix the field of view back to its original state (you can adjust this value to your liking but I found 75 to be close to how it looked like originally if you prefer that).

11. An additional recommended step to avoid issues during gameplay: in your “Universal Unreal Engine 5 Unlocker” window go to "Gamepad button bindings" > Toggle gamespeed override (+ X button) - this is set to the left stick (click) by default, I recommend changing this to the start button so it doesn't accidentally trigger during gameplay.

12. Enjoy the game!

A couple of things to note: I have tested this online and it works perfectly, no issues whatsoever.

If you are worried about getting banned or just want to be extra safe you can always simply open up the game normally if you intend to play online. In order to play this game with widescreen support you will have to follow step 7 each time, so I’m assuming the ultrawide hack doesn’t permanently alter your game files as you will have to actively be running “IGCSClient” alongside your game for their to be any risk of getting banned. So to avoid that risk completely simply open up the game normally if you intend to play online. Though imo I don't think there is any risk here as long as you're not opening up the terminal and messing around with stuff during an online match. I have played many ranked matches online and have had zero issues.

It’s early days so there might be a better method to do this, or even better if they update the game and simply provide ultra wide support like they should have from the very beginning (this game clearly is capable of running on Ultrawide and looks good!).

Also note although I mentioned the "21:9" aspect ratio this should work for any type of widescreen.

I hope this helps!

-----

Proof: https://drive.google.com/drive/folders/13WUrm-vIQJu-NuFt_a5yIXV6VqedRaQj?usp=sharing

I think there is an issue with the files UniversalUE5Unlocker.dll on the google drive, it was a .log extension and not a .dll , not sure if its the issue but after converted the file in .dll the software working but the 21/0 ration doest work

Hi there, I had to remove the google drive link as google flagged that specific file so it wasn't available anymore (feel free to use the new download link and try again).

[Noxdormus]

Originally posted by HANZ64:

Originally posted by Noxdormus:

I think there is an issue with the files UniversalUE5Unlocker.dll on the google drive, it was a .log extension and not a .dll , not sure if its the issue but after converted the file in .dll the software working but the 21/0 ration doest work

Hi there, I had to remove the google drive link as google flagged that specific file so it wasn't available anymore (feel free to use the new download link and try again).

On the new link the file is still shown as : UniversalUE5Unlocker.dll.log the .log at the end make impossible to choose it when you launch the software, but anyway alsoi after I converted it the game doesnt appear as 21/9 ratio, any idea ? Is it du to the file ?