AV1 - NVENC is still missing

[BorealSine]

Would love to see AV1 - nvenc, RTX 4000 support it.

[Justin62628]

please use nvencc av1 instead

[BorealSine]

Originally posted by Justin62628:

please use nvencc av1 instead

AV1 option is missing under - NVENC encoder, i only have h264 and h265 there, nothing else.

[BorealSine]

Originally posted by Justin62628:

please use nvencc av1 instead

https://prnt.sc/spyOOH7l4aHH have a look, no AV1 , i need it for power efficiency, lower size and higher quality !!!

[Justin62628]

do you have professional version?which has nvencc and nvenc two encoders. Will add AV1 encoder to NVENC soon

[BorealSine]

Originally posted by Justin62628:

do you have professional version?which has nvencc and nvenc two encoders. Will add AV1 encoder to NVENC soon

Non professional. Thank you, its needed a lot. SVFI is amazing, other than this little issue I don't have any problems, I've interpollated ~150 movies so far with it with amazing results.

[-S3R610-]

Originally posted by Justin62628:

please use nvencc av1 instead

Is AV1 NVENCC already fixed? I reported several times on Discord that the size of the exported files encoded in AV1 NVENCC were inordinately large. One opening was around 200GB, you told me that you never tested AV1 NVENCC because you don't have a 4000 series GPU, have you done it yet and is it fixed? If not, it would be better off removing AV1 NVENCC and implementing it inside normal NVENC as that one always worked flawlessly.

[Justin62628]

Originally posted by BorealSine:

Originally posted by Justin62628:

do you have professional version?which has nvencc and nvenc two encoders. Will add AV1 encoder to NVENC soon

Non professional. Thank you, its needed a lot. SVFI is amazing, other than this little issue I don't have any problems, I've interpollated ~150 movies so far with it with amazing results.

updated with SVFI 6.20.11-beta

[Justin62628]

Originally posted by Sergio:

Originally posted by Justin62628:

please use nvencc av1 instead

Is AV1 NVENCC already fixed? I reported several times on Discord that the size of the exported files encoded in AV1 NVENCC were inordinately large. One opening was around 200GB, you told me that you never tested AV1 NVENCC because you don't have a 4000 series GPU, have you done it yet and is it fixed? If not, it would be better off removing AV1 NVENCC and implementing it inside normal NVENC as that one always worked flawlessly.

fixed with SVFI 6.20.11-beta

[BorealSine]

Originally posted by Justin62628:

Originally posted by BorealSine:

Non professional. Thank you, its needed a lot. SVFI is amazing, other than this little issue I don't have any problems, I've interpollated ~150 movies so far with it with amazing results.

updated with SVFI 6.20.11-beta

Wow, thank you a lot. I will let you know about my results on rtx 4090 - AV1 - SLOW

[BorealSine]

Originally posted by Justin62628:

Originally posted by Sergio:

Is AV1 NVENCC already fixed? I reported several times on Discord that the size of the exported files encoded in AV1 NVENCC were inordinately large. One opening was around 200GB, you told me that you never tested AV1 NVENCC because you don't have a 4000 series GPU, have you done it yet and is it fixed? If not, it would be better off removing AV1 NVENCC and implementing it inside normal NVENC as that one always worked flawlessly.

fixed with SVFI 6.20.11-beta

I've interpollated couple of videos and when i go to properties of video file it says there that its HEVC (H265 main 10 @L3.1) despite AV1 8bit being selected, the file size is also larger compared to CPU's AV1 8bit.

[Justin62628]

Originally posted by BorealSine:

Originally posted by Justin62628:

fixed with SVFI 6.20.11-beta

I've interpollated couple of videos and when i go to properties of video file it says there that its HEVC (H265 main 10 @L3.1) despite AV1 8bit being selected, the file size is also larger compared to CPU's AV1 8bit.

Seems that it encounters error during the render test. Disable auto error correction in the Preference Settings and make sure all options are not set “AUTO” to fully disable the auto error correction, enable debug mode under the advanced settings and rerun the task with your settings to reproduce that error during the render test. Send the full error log to a new post for further diagnosis.

[BorealSine]

Originally posted by Justin62628:

Originally posted by BorealSine:

I've interpollated couple of videos and when i go to properties of video file it says there that its HEVC (H265 main 10 @L3.1) despite AV1 8bit being selected, the file size is also larger compared to CPU's AV1 8bit.

Seems that it encounters error during the render test. Disable auto error correction in the Preference Settings and make sure all options are not set “AUTO” to fully disable the auto error correction, enable debug mode under the advanced settings and rerun the task with your settings to reproduce that error during the render test. Send the full error log to a new post for further diagnosis.

Yes, there is an error, here is a screenshot https://prnt.sc/gQURchoppW2N
I've used AV1 with OBS and to record my gameplay. SVFI switches to H265 after saying ''Error while filtering: Invalid argument''
Conversion failed!

[BorealSine]

I run 555.99 nvidia driver, RTX 4090, AV1 is supported. I've also left Beta program and on main stable build of SVFI, both have the same issue.

[BorealSine]

When I disabled auto-correction i got these errors:

Process at Chunk 001: 0%| | 3/1755 [00:00<05:53, 4.96frames/s, R=0, C=3, RPT=0.00, WPT=0.00, S=-1, SC=0, TAT=0.00, PT=0.48, QL=24]
2024-08-23 19:45:57,676 - RenderFlow - 1446 - CRITICAL - Render Thread Panicked
2024-08-23 19:45:57,676 - RenderFlow - 1447 - CRITICAL - Traceback (most recent call last):
File "X:\SteamLibrary\steamapps\common\SVFI\skvideo\io\abstract.py", line 632, in writeFrame
BrokenPipeError: [Errno 32] Broken pipe
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "X:\SteamLibrary\steamapps\common\SVFI\WorkFlow\RenderFlow.py", line 1420, in _render
File "X:\SteamLibrary\steamapps\common\SVFI\skvideo\io\abstract.py", line 637, in writeFrame
OSError: [Errno 32] Broken pipe
FFMPEG COMMAND:
X:\SteamLibrary\steamapps\common\SVFI/ffmpeg.exe -hide_banner -y -vsync cfr -r 122000/1001 -f rawvideo -pix_fmt rgb24 -s 886x504 -i - -r 122000/1001 -preset:v medium -vf format=yuv444p10le -sws_flags bicubic+accurate_rnd+full_chroma_int -s 886x504 -pix_fmt yuv420p -profile:v main -rc:v constqp -c:v av1_nvenc -g 364 -qp:v 14 -b:v 0 T:\Temp Files\17 08 2024 XRP ETF Larry Fink_3f4_1ea341\chunk-tmp.mp4
FFMPEG STDERR
Stream #0:0 -> #0:0 (rawvideo (native) -> av1 (av1_nvenc))
Error while filtering: Invalid argument
Conversion failed!
:
2024-08-23 19:45:57,728 - one_line_shot_args - 138 - ERROR -
Program Failed at 2024-08-23 19:45:57.727572: Duration: 0:00:02.235594
Setting breakpad minidump AppID = 1692080
Error while filtering: Invalid argument
Conversion failed!
:
2024-08-23 19:45:57,728 - one_line_shot_args - 138 - ERROR -
Program Failed at 2024-08-23 19:45:57.727572: Duration: 0:00:02.235594
Setting breakpad minidump AppID = 1692080
SteamInternal_SetMinidumpSteamID: Caching Steam ID: 76561198056107888 [API loaded no]
[LAST ERROR MSG in OLS]: [av1_nvenc @ 000002a0319d1240] Error setting option profile to value main. [vost#0:0/av1_nvenc @ 000002a0319d0e00] Error while opening encoder - maybe incorrect parameters such as bit_rate, rate, width or height. Error while filtering: Invalid argument [out#0/mp4 @ 000002a0319b9e00] Nothing was written into output file, because at least one of its streams received no packets. frame= 0 fps=0.0 q=0.0 Lsize= 0kB time=N/A bitrate=N/A speed=N/A Conversion failed! : 2024-08-23 19:45:57,728 - one_line_shot_args - 138 - ERROR - Program Failed at 2024-08-23 19:45:57.727572: Duration: 0:00:02.235594 Setting breakpad minidump AppID = 1692080

[BorealSine]

Errors screenshot when auto-correction is disabled : https://prnt.sc/AUG3OawgmGwx
I've tried several encoding presets with all of them giving me the same errors (from p7 to slow)