Official Tuning Thread

[Zaraphiel]

Hey guys.

I was thinking about a thread to share your tuning (Suspensions & ECU).

Feel free to share your car settings here !

[Blox Man]

My most recent tuning (for off road konig)

Height: 510mm aka maxed
Force: 28200nm
Bump Force: 4080
Rebound: 3088
Camber:
Front: -2 deg
Rear: -2.5 deg
Toe in/out:
Front: -1.5 deg
Rear 1.8 deg
ECU:
Wastegate (haven't fully learned function still new to mechanics): MAXED
ABS: 5
Traction control: (highly recommended from my experience) MAXED
RPM: 6, 8, 16, 18, 22, 25

Note: This is with a turbo manifold, performance engine, race exhaust, individual throttle bodes, welded differential, front and rear race sway bars and nitro if that changes anything.

[Blox Man]

and 130mm spacers

[Playbug]

Got my second konig for a drift build. Is turbo or NA better for drifting. Got the performance engine on it

[Зеленський]

чо

[2024 Proton Iriz 1.6L VVT]

Messaggio originale di quietclover:

There is a sticker behind the driver side door saying tires should be 32 PSI so i keep my tires at 32 PSI

same

[Bobmiller764]

i found that if your struggling to get the track time with turbo, give throttle bodies a try, it really helped, also pete's tune helped alot

[Diesel3879]

i got an idea how about doing the same thing with the water that you did with the electric.
i think once you get hooked up to the town water you could buy a hose with water spray nozzle for crops outside...

[Mr.Ben]

Messaggio originale di Zaraphiel:

My current settings:

Turbo: 20 PSI
ABS: none (I removed ABS module)
TC: 1 (Helps a bit in first and that's all)
Power: 5 - 17 - 23 - 25 - 25 - 0: shift at 7kRPM
Suspensions:
Height:15/50
Spring force: 40/50
Bumper/rebound: Untouched (25/50)
Front suspension:
toe: 1 (40/100)
Camber: -4 (33/50)
Rear suspensions:
toe: -0.8 (58/100)
camber -3.5 (32/50)

I have another ECU tuned and I'll do some tests runs to beat my racetrack time (45.487s)
Along with probably a rework on my suspensions settings as it can be improved. It feels to understeer a bit too much, need to steer a bit more for the track.

I find this becomes super slidy when the turbo is installed. What could I do to reduce that? By slidy, I mean take the dirt road and then go top speed on that around a corner level of slidy. And that’s on the tarmac

[Noah Juan Juno]

After having tried what certainly feels like everything else, I adjusted my game controller's settings. Voila. I finally got those damnable racecar tires. Sheesh!

[DevilGunner]

im sorry ijust buy the game how you put 3 person third

[ajdrigs]

Would anyone know why my Konig drifts left? I have check every handling part and they're tuned the same, All tires same tread (sport) and same PSI.

[blunked]

Messaggio originale di DevilGunner:

im sorry ijust buy the game how you put 3 person third

b

[blunked]

Messaggio originale di ajdrigs:

Would anyone know why my Konig drifts left? I have check every handling part and they're tuned the same, All tires same tread (sport) and same PSI.

take it all apart and start again.

[urmom1264]

@tybalt prince of cat you should set the redline for about 7000 rpm

[urmom1264]

For my Konig I run
Turbo:20
ABS:10
Traction control:10
gears 8,11,13,17,21,25
Front Suspensions: 20/50 height 25/50 spring force bump force 25 rebound
Rear Suspensions: same settings but not 20 height its 22 height
Tires:32 PSI
(sorry for my englich)