Extractor not outputting resources on conveyor

[NoBel]

Finally found some titanium, so i setup an extractor on it. No matter what I do though it won't output the regolith on the conveyor i setup between it and the next machine. I tried destroying the conveyor and rebuilding it. I also tried the same with the extractor but had the same issue.

Has anyone else run into this?

[giimer]

Screenshot please

[Katsuchiyo]

I am actually in the same spot right now with titanium specifically. They just wont output titanium. Was working when I saved and closed last night.

[NoBel]

https://steamuserimages-a.akamaihd.net/ugc/2512529245958072843/96FF83BEA7120B2CCB5571FA118CCC6DB1611E4A/?imw=5000&imh=5000&ima=fit&impolicy=Letterbox&imcolor=%23000000&letterbox=false

Could be something from the recent patch that caused this.

[Tizferatu]

Your screenshot doesn't work for me, but if you have the conveyor hooked to something that can't accept it (like the wrong storage, or storage not set for the right resource) the upstream machine (extractor in your case) won't put stuff on the belt.

[john may]

the conversion rate to get titanium is way too high as well

[Slinner260]

I've had the same issue; extractor has power and output storage is full but won't put anything on the conveyor. Deleting the conveyance and rebuilding it did not help

[AdricTheGreat]

Did you make sure the direction of the conveyors was correct? Make sure to start at the exit of the extractor and then go to where you want it to go, if you start the other way around the belt is the wrong way sometimes.

[TealMercury]

Just ran into exactly the same problem. Tried rebuilding conveyors and the extractor, it does not output titanium regolith on the conveyor. If I allow drone to take move resources some of it goes to the refinery set to process titanium, but I noticed most of it gets taken to the initial regolith container to be turned into smart concrete.

[Sandor]

There are two possible solutions here.

1. you connected the conveyor belt from the smelter or whatever is that other machines name, and not from the extractors direction. Hence where you start from the conveyor belt will give the direction to it. But arrows are also hinting that. (most certainly this is the issue)
2. on the extractors's menu the output option is turned off. By default is on, but I think you tried to fix it and now its turned off.
3. you do not have enough energy, even batteries are showing its full, during night time, if your batteries wont cover the whole energy needs of your "settlement" its turning off (in my opinion random machineries). You can prioritise some so it wont be effected by this silly automation.

[Penner Alfred]

Same Problem for me, nothing helped to solve my Problem with Titanium.

[Варркан]

Экстракторы вообще перестали работать после обновления игры. Полностью переделал всю цепочку, не помогло

[Mister Fabulous]

You're connected to a smelting furnace, not a refinery. The game seems to check that the output/input matches otherwise it won't put items on the belt.

RIF. Already posted. Oops ^_-

Originally posted by Tizferatu:

Your screenshot doesn't work for me, but if you have the conveyor hooked to something that can't accept it (like the wrong storage, or storage not set for the right resource) the upstream machine (extractor in your case) won't put stuff on the belt.

[Razguul]

Originally posted by Penner Alfred:

Same Problem for me, nothing helped to solve my Problem with Titanium.

Ditto.

[x-siffror - Tsume - Shadow]

Set the "Arrows" to 3. As in priority. That will prio its function. See if that helps. Most structures will shut off to conserve power to the next morning even if you have abundant.

[giimer]

Originally posted by Варркан:

Экстракторы вообще перестали работать после обновления игры. Полностью переделал всю цепочку, не помогло

Значит ждём. Ранний доступ на то и ранний доступ, что бы активно фиксить и патчить