MayFlash F300

[WanoWin2]

I Have A Mayflash f300 and i wanted to try to play sf6 with it but i cant seem to get it working does anyone else have this problem? if so how to fix it?

[IngwerOrang]

i got the elite version which works without any issue. did windows recognize it when you plugged it in initially ? also did you update to the lasted firmware ? did you try to fiddle with the big picture controller settings, might help to get the arcade stick to get recognized.

[al64inthedark]

I can only say that on Steam Deck, you go into to controller menu and you have to select the priorities between different controller and set the "generic xbox controller" as first.

[Samvega]

Originally posted by WanoWin2:

I Have A Mayflash f300 and i wanted to try to play sf6 with it but i cant seem to get it working does anyone else have this problem? if so how to fix it?

If you have the same issue I had, here was what worked for me:

On my older PC my Mayflash F500 doesn't interface properly with USB. This is a known issue with older gen Intel chips, and one solution that works for some people is entering the BIOS and turning off XHCI, which stands for Intel USB 3.0 eXtensible Host Controller 1.0.

Here's the post I read: https://old.reddit.com/r/fightsticks/comments/gfqqmr/mayflash_f500_elite_connection_issue/fqjyol0/

This solution didn't work for me. What did work was buying a cheap (<£5) USB 2.0 hub and plugging the Mayflash in through that. Works great now.

Make sure to also try the different input settings. You know it's working when the LED comes on. XInput is green, the middle one is purple and PS inputs is blue (I think?). Try each of the inputs until an LED comes on. Sometimes you have to wait about 10 seconds for your PC to register the USB device properly.

[WanoWin2]

Thanks for your help my pc did recognize the stick and i also works with other games Mk11, and guilty gear. ill be looking into updating the firmware and going into big picture mode and going through the controller setting

Edit- After going thought and updating the firmware i got the stick to Work! Thank You guys so much!!!