flexity tram

[davidallen10]

does any one know how to extend ramp

[Toni 🇦🇹 🇩🇪 🇬🇧]

To open the wheelchair ramp:
1) Open door 1 (key num 9 or on the right control the button on the top right)
2) When the door is open and no people are getting off or on. Look at such a square metal cover (It's next to the driver's door)
3) Click on the metal cover: After that, the ramp should unfold automatically and the wheelchair users will come by automatically.

[Toni 🇦🇹 🇩🇪 🇬🇧]

To stow the ramp:
1) When the wheelchair user has stopped (it's best to wait 10-20 seconds).
2) Click on the expanded ramp. It should then stow automatically. So it "disappear" back into the ground.
3) Close door 1 (as described above) You can also use Num 3 / Zentrales Schließen

[Toni 🇦🇹 🇩🇪 🇬🇧]

A few notes on wheelchair users in Tramsim Vienna:
- The wheelchair ramp sometimes does not fully open when the wheelchair user gets out.
- If the wheelchair user wants to get out, a wheelchair user symbol lights up white next to "Hold-Halten".
- When the wheelchair user has pressed the button, door 1 opens by itself.

If you want to see this, just watch a YouTube video, it is shown there very often. I hope I could help them!

[davidallen10]

thank you been driving me mad for weeks

[Toni 🇦🇹 🇩🇪 🇬🇧]

You are welcome

[davidallen10]

hi sorry to bother you again but do you know if the e2 tram has a ramp .

[Toni 🇦🇹 🇩🇪 🇬🇧]

The E2 is not Wheelchair accessible, because of the high level

[davidallen10]

many thanks

[Toni 🇦🇹 🇩🇪 🇬🇧]

No problem.
If there is anything else you would like to know, please do not hesitate to ask me.

[davidallen10]

ok thank you very kind

[Cori]

Omg, thank you. This wasn't covered by the tutorial.