Steering Wheel issues?

[GB_Wolf]

Anyone having steering wheel issues? I have an older Logitech Momo wheel.. It works totally fine in NASCAR Heat 4, but when I try to go into Heat 5, it defaults at 900 degree steering (even after saving at 270) and then I am all over the place. Nothing I have tried will save the 270 degree steering and there is no way I can drive with that 900 degree setting.. 1/4 inch movement and I'm around like Robby Gordon on any given day..

[Nats]

Can't you change the wheel driver setting to 900 degrees in Win 10 like? Wheel control is fine for me with both set to 900 degrees..

[GB_Wolf]

Originally posted by Nats:

Can't you change the wheel driver setting to 900 degrees in Win 10 like? Wheel control is fine for me with both set to 900 degrees..

I'm actually trying to get it off of 900.. My wheel only goes 270.. I did go in and re-calibrate in device manager.. I'll see how it works now.. Thanks for the input..

[LMS|Fivefifty]

Hi . I've used the same momo since 2005 and it's the best it's ever work with any sims. I just set it at 180 and it's fine. In the Logitech interface I have everything set to 150 and I don't let the application take over. I can't remember the exact wording but it's a box you can check at the bottom of the setup screen. Hope this helps.

[butchd52]

I have the exact problem with my G27

[martin100]

Originally posted by butchd52:

I have the exact problem with my G27

Have you try this method? https://www.reddit.com/r/assettocorsa/comments/2a63zk/protip_g27g25_you_can_change_your_wheels_lock/?utm_source=amp&utm_medium=&utm_content=post_body

[Patfox74]

I dont know if you have that but just for sure. If usual to connect any other controller try turn off that or unpluged. Try again set on options n test sensitivity

[LMS|Fivefifty]

one more thing about the MOMO. It has to be plugged in a 2.0 usb port to work properly mine won't work in a 3.0 port

[GB_Wolf]

Originally posted by FIVEFIFTY:

one more thing about the MOMO. It has to be plugged in a 2.0 usb port to work properly mine won't work in a 3.0 port

It works perfect in NASCAR Heat 4.. But in 5, I turn the wheel 1/4 inch and it goes completely from stop to stop.. No matter what I do, I can't make it move any less.. This is frustrating..

[LMS|Fivefifty]

Sorry I ran out of suggestions. very weird !! 4 and 5 are pretty much the same game.

[BloodHawk]

If it works great for NH4, try copying over your config folder from NH4 to NH5, usually in:

C:\Users\(username)\Nascar Heat 4\Config

That way all of the settings should be the same.

[GB_Wolf]

Originally posted by BloodHawk:

If it works great for NH4, try copying over your config folder from NH4 to NH5, usually in:

C:\Users\(username)\Nascar Heat 4\Config

That way all of the settings should be the same.

Tried it and it made no difference.. I finally changed the settings from 270 to 180 and messed with the sensitivity settings and I can finally drive it.. I'll still need get it perfect, but I can atleast drive it now.. Thanks for the input..

[Gold]

here is the solution...its just a nascar heat 5 bug...i was stuck at 180 until i found this
https://steamcommunity.com/app/1265860/discussions/0/3266806537528623218/