Add a logic device that repairs water filters

[vovuey]

I use water filters on the pipes, its reduced breakdowns mostly to the front water filters. The problem is water filters are far too small to place both durability logic readers and logic spanning hurler units over them so I can't automate their repair.

A logic device should be added to the game that can both read and repair parts, including small parts like water filters

[Toronai]

place the hurler to one side rather than over the top, like this

https://www.youtube.com/watch?v=x55p1ksYGnQ

[vovuey]

I have four water filters on the same pipe I can't use both 4 logic durability reader and 4 logic spanning hurlers on the same pipe

[Alucard †]

Originally posted by vovuey:

I have four water filters on the same pipe I can't use both 4 logic durability reader and 4 logic spanning hurlers on the same pipe

Edit: If you meant on same pipe piece then you might want to change that.

Cause all 4 filters are losing durability faster than if spread on a row and you only gain benefit from one filter. Idk if this was fixed.

You need to spread them on 4 different pipe pieces for full filtration % iirc.

[Klandor]

Yeah, Water Filters should be spread across FIVE Straight Pipe's in a Row. My recommended setup is to have the setup as follows, being it's the most reliable and easiest to control:

• Intake Pipe.
  
• Straight Pipe with a Logic Valve (this becomes the Master Valve for the whole Mine allowing the Mine to be completely turned off and protecting the Water Filters from damage while the Mine is not in use (see below).
  
• 5 x Straight Pipe with 1 Water Filter per Pipe, placed on TOP of the Pipe (5 Water Filters will prevent ALL other equipment in the Mine from being damaged by any water supply coming from THAT Intake Pipe - only the Water Filters will need any Automation Repair Logic installed to repair damage to the Filters).
  
• Use a T-Pipe to split the water supply - one side will supply ALL Miners in the Mine and should have a Pressure Tank and a Straight Pipe with a Logic Valve immediately before the first Miner and the other side will supply the Conveyors/Sorters/Smelters/Gem Compressors with a similar setup immediately before the first Conveyor.

Make sure you plan out your Mine to include a Pressure Tank on each Pipe run, roughly every 10 - 15 Pipe segments, to keep the Water Pressure at functional levels. Each Pressure Tank will need some Shard Pieces or a Shard Bar (a Bar will last longer). This will be more critical on the Conveyors, but it wouldn't be a bad idea to do this for both the Miners and Conveyors at the same location (single place to bring a Pan of Shard Bars if they need to be refilled).