How Do You Do Stuff On The Anvil

[homeboyNG123]

I really can't figure it out!!

[Klandor]

You need to click the Anvil to get the picture of what you want to create: Dagger, Sword, Axe, Ring, or Necklace. You then need to place the appropriate amount of what is pictured into a Pan. For example, a Ring needs a single Gem and a single Gold Bar, while a Necklace needs a single Gem and TWO IDENTICAL Gold Bars. Place the Pan on the Furnace. The two identical Gold Bars can be a single Bar that gets sawed in half while the Pan is on the Furnace (that's how I do it...). Once the Bar(s) is glowing nicely, pick up the Pan and place it FLAT on the Anvil, grab the Blacksmith Hammer, and hit the Anvil. Resultant item will be "stuck" to the Pan when you pick up the Pan, unless you ONLY pick up the Item...

[MARRA92]

left click to roll anvil items.
Require iron bars for weapons and gold bars + cutted gems for jewels.
Choose your craft, put bars on heat fire nearby.
If jewel add gem on anvil tip first.
Drop hot bar on anvil and saw it if needed, into 2 or 3 slices.
Drop the saw and equip the hammer, and click while aiming the anvil.
Your Item is done.
To carry necklace into pan you need it to hit something and enter the pan while vertical or so.
For the sword, rapidly pick up the pan right after the sword enters it, so it freezes into that moment's position.

[Norseman]

As the other say over. I also suggest to invest in the construction hammer so you can knock the anvil down, also work on all other objects you place in the world ;)

[Ryanizme]

I keep putting the gem on the anvil. then the red hot gold bar on the anvil flat in the right places and it is set to the ring but every time I try to hit it with the hammer it just changes what i had it set from ring to something else. ive tried over and over again

[Klandor]

Originally posted by Ryanizme:

I keep putting the gem on the anvil. then the red hot gold bar on the anvil flat in the right places and it is set to the ring but every time I try to hit it with the hammer it just changes what i had it set from ring to something else. ive tried over and over again

First off, it's considered bad form to resurrect old Discussions that are similar, but different.

Second, are you using the correct Hammer? There's the Construction Hammer and the Blacksmith Hammer. The former is used to lock and unlock components placed in and around your Claim. The latter is what's used to construct things on the Anvil. I suspect you may be trying to use the former instead of the latter...

EDIT: The original Discussion Post was from 2022. There have been a number of updates since then and a major upgrade performed to the game itself. Some of the details from the original answer have changed to a degree. The Pan is no longer used, as the Anvil now has specific locations in which the Gem and Ores need to be placed. Now, you need to clearly check the order things are listed on the Quest Scroll, and make certain that the appropriate Ore and/or Gem ends up in the correct spots on the Anvil. A Scroll that list a Necklace as:

1. 10.3 Gold
   
2. 97.5 Iron
   
3. 45.8 Emerald

does not equal:

1. 97 Iron
   
2. 10 Gold
   
3. 45 Emerald

nor does it equal:

• 45 Emerald
  
• 97 Iron
  
• 10 Gold
  It MUST have a 10.3 or higher weight Gold Bar placed in the position labeled "1" on the Anvil, 97.5 or higher weight Iron Bar placed in the position labeled "2" on the Anvil, and an 45.8 or higher weight Emerald placed in the position labeled "3" (with the icon of a Gem in it). Notice that the weight MUST be GREATER THAN OR EQUAL TO. A 10.3 weight request will accept anything that is greater than or equal to 10.3 weight. So, 10.3 weight will work. 11 weight will work. 10 will NOT work.
  
  If you have any further issues with this, I'd suggest starting a New Discussion and please include details of what your trying to make. I'd suggest screenshots of the Scroll and the Anvil. Details of how to make screenshots and make them visible in the Discussions is available in Steam Help. You can also probably find it posted online under "how to post a screenshot in Steam"...

[Ryanizme]

I apologize and you can delete my posts. all i did was google hydroneer anvil and got to here.

[Klandor]

No problem. Hope it helped, though.