Wheel and pedals not detected

[a.warringa1]

It used to work fine but after one of the latest updates my TS-PC and CSL Elite CL pedals don't work anymore. Tried reinstalling AMS, deleting the docs folder with the controller profiles.

When calibrating the wheel it simply doesn't see the axis. When calibrating the pedals, AMS sees any of my 3 pedals as my braking pedal. The buttons of the wheel work btw.

I read every possible thread I could find about this and noticed a lot of people have the same issues, also with other wheels and pedals :-/

[Babbu70]

idem

[a.warringa1]

Originally posted by Babbu70:

idem

Which wheel and pedals do you have?

[LEWISHAM14]

I wish i had read this forum. I updated and Yes the wheel and pedals are gone i had jsut got back to testing caldwell park. it work like butter.

[grandafam1]

I have Clubsport V3 pedals (CSL Elite wheel) and everything works fine.

Perhaps there is just a problem with the Calibration Part, since I haven't tried to recalibrate in at least a year?

[Mahjik]

If you haven't done this yet, go into controller settings and hit "Reset to Defaults". Then re-configure your gear.

[Babbu70]

Originally posted by Mahjik:

If you haven't done this yet, go into controller settings and hit "Reset to Defaults". Then re-configure your gear.

thanks

[a.warringa1]

Originally posted by Mahjik:

If you haven't done this yet, go into controller settings and hit "Reset to Defaults". Then re-configure your gear.

That works for some indeed. But I did that, deleted the documents folder, reinstalled AMS2, tried really everything I could think of. It just doesn't see the axis anymore of both my wheel and pedals.

[Mahjik]

Originally posted by a.warringa1:

Originally posted by Mahjik:

If you haven't done this yet, go into controller settings and hit "Reset to Defaults". Then re-configure your gear.

That works for some indeed. But I did that, deleted the documents folder, reinstalled AMS2, tried really everything I could think of. It just doesn't see the axis anymore of both my wheel and pedals.

You may also need to do this:

https://steamcommunity.com/app/805550/discussions/0/3241971691947948072/#c3241971691949824409

[a.warringa1]

Originally posted by Mahjik:

You may also need to do this:

https://steamcommunity.com/app/805550/discussions/0/3241971691947948072/#c3241971691949824409

Thanks for the help mate, but I have that turned off too. I really read every thread I could find about this issue. The silly thing is that it used to work fine, and like others, after one of the latest updates the controllers can't calibrate anymore. It doesn't seem to be related to the type of wheel and pedals - some have the same as I have and it works for them, while others with completely different gear have the same issue since on of the latest updates.

[grandafam1]

Originally posted by a.warringa1:

Originally posted by Mahjik:

You may also need to do this:

https://steamcommunity.com/app/805550/discussions/0/3241971691947948072/#c3241971691949824409

Thanks for the help mate, but I have that turned off too. I really read every thread I could find about this issue. The silly thing is that it used to work fine, and like others, after one of the latest updates the controllers can't calibrate anymore. It doesn't seem to be related to the type of wheel and pedals - some have the same as I have and it works for them, while others with completely different gear have the same issue since on of the latest updates.

Have you taken every other controller device off the USB chain, only leaving your wheel and pedals connected? If I leave the XboxOne controller connected I often have issues with either my wheel and/or pedals.

[Mahjik]

Something to check is to see if you can configure the Project CARS 2 Demo. This would help see if it's just a problem with AMS2 or if the Madness Engine itself is just not seeing the hardware.

[a.warringa1]

Originally posted by grandafam1:

Have you taken every other controller device off the USB chain, only leaving your wheel and pedals connected? If I leave the XboxOne controller connected I often have issues with either my wheel and/or pedals.

Hi, yep I have, in some other games that indeed sometimes messes the controllers up. AMS2 does kind of see my controllers though. The buttons on my wheel work, but the axis don't. When I calibrate my pedals, no matter if I press clutch, brake or throttle - on the screen the brake immediately goes to 100% and stays there. Like it sees the axis like a button.
It's only AMS2 that doesn't work btw - Iracing, rf2, AC, Raceroom don't have this issue :-/

[a.warringa1]

Originally posted by Mahjik:

Something to check is to see if you can configure the Project CARS 2 Demo. This would help see if it's just a problem with AMS2 or if the Madness Engine itself is just not seeing the hardware.

Good idea, I have PC2, will download that again to see. But since this happens to multiple people after one of the recent AMS2 updates I do think it's an AMS2 issue. But going to download PC2 to test, thx

[regis902]

Hello, glad to have found this thread, I have the same wheel/pedal setup and am experiencing the exact same issue.

[a.warringa1]

Originally posted by regis902:

Hello, glad to have found this thread, I have the same wheel/pedal setup and am experiencing the exact same issue.

Welcome aboard :)