Automobilista 2

Automobilista 2

Brakes on corners
I'm using a G25 wheel and peddles. on every circuit with all cars i have a certain corner where the brakes lock up constantly. Obviously i'm not braking at the time. It's ruining what could be a good game
< >
Showing 1-6 of 6 comments
Terantino Jun 5, 2020 @ 4:45am 
Turn off brake assist and check your calibration.
Simmo 99x Jun 5, 2020 @ 5:06am 
You can run ABS, but make sure in the car setup/car management accessed with the d-pad, the higher the number the more ABS is used.
50 will still lock up
100 will stop all locking but the car will start squirming under hard braking.
80-90 will give you the optimum performance depending on the car, and you shouldn't have to worry about the brakes again.
Same with Tc/Stability higher the number the more slip you get/lower will cut in all the time.
The only issue is if you join a lobby where ABS is disabled/Timetrial Authentic and the car doesn't have ABS then you won't have access.
Otherwise turn down the brake pressure/get used to driving the car overtime.
This is the best work around at the minute/Beta.
Last edited by Simmo 99x; Jun 5, 2020 @ 5:07am
Alice Cooper Jun 5, 2020 @ 7:27am 
If game setting don't fix it. Make sure its not an actual problem with your pedals? I have the same pedals. Dust and dirt build up could but is unlikely to be your problem. Still its worth cleaning inside the pedal box every so often. More importantly does it happen with any other games? Could be a sign of a dirty/faulty potentiometer. This can cause intermitant problems before finally giving up the ghost. You can clean/replace to solve the issue. Google it if necessary. Anyway good luck
Mahjik Jun 5, 2020 @ 8:22am 
Some people have reported that their pedals lose calibration every time they shut down AMS2. So they have to re-calibrated their pedals each time they start. You could be experiencing something similar...
Lord Foulbowels Jun 8, 2020 @ 6:35am 
thanks for advice, will give your suggestions a try
Lord Foulbowels Jun 13, 2020 @ 10:10am 
Originally posted by Lego:
Turn off brake assist and check your calibration.
Turning brake assist off has sorted problem out. Thanks for advicen i'm now enjoying this
< >
Showing 1-6 of 6 comments
Per page: 1530 50

Date Posted: Jun 5, 2020 @ 4:39am
Posts: 6