Me too, there’s space but I can’t put anything in it.

I had the same issue that goliath had when I used this mod a few months back, I see no reason why the cargo hold shouldn't hold literally everything. Unless there is a good reason for it. I spent all those resources building it and I can't store the stuff I actually want stored?

@Goliath This is why it's important to actually read stuff before going ahead. Even just by looking at the pictures, you'd have clearly seen that the 2x3 placement grid for the 1x2 cargo hold is by design, to balance the storage capacity (think of it as the actual storage space underneath the floor. The "bulk" versions don't have that restriction.

As for the storage designation, look at the Q&A. It's either that, or you're using the Dynamic and DynaVac versions of the massive hold, which, again, is clearly stated in the description to be limited to a few resources, namely chunks and raw resources...

Outside of that, you're right, it might be a bug on your end, all my holds are working as advertised.

This mod is incredibly bad.

Almost all of the cargo holds are bugged-- don't fit even a third of what it says it has space for, cannot be designated for very obvious materials, like steel, or components, and have absolutely baffling options for what CAN even be placed in them.

I assume it's just a bug, but, good lord, it's incredibly frustrating to spend so much steel on a cargo hold that holds nothing (not to mention takes up a 6 tile area when it's meant to be 1x2.

can u walk on/through the storage

I would love for these to be able to be placed on SoS2 ships. The bulk 1x2 cargo hold can be, but the larger (2x2 and up) cannot be.

What is the diffence between normal and bulk?

@cap_wacky dirt never gets hidden by storage buildings using vanilla mechanics. It's always only beauty, just like on vanilla shelves

Hiya, This is a fantastic mod. Loving it utterly and gonna be my go to for grav ships. Noticing a bug though. Some of the bulk holds, namely the 2x1 steel bulk hold and 2x2 Bulk hold are making the room they are in completely dirty. E.g. most containers hide the beauty and dirt penalties of the items they contain. For some reason these cargo holds do not making a room "Very Ugly" if loaded.

@Thicc Niddles No, that's some mod conflict

my refrigerated holds dont seem to get powered on even when connected to a sufficient grid, is this a known thing?

I really love this mod! Can't imagine my ships without it. I personally stick to the Bulk models as I feel it was balanced enough with having the buffer space and only being available on ships. Plus, you can always use StackGap if something feels too cheaty. Keep up the good work! This is great :D

I don't usually ask for things to be added to a mod but would it be possible to make it to where the cargo holds could also be built on a ship from the Save Our Ship 2 mod. Not even sure how difficult that would be but I figured it couldn't hurt to ask.

Those current requirements match what's written in the mod description

Small cargo holds can be placed in colony, however, bigger ones are only limited with gravships. As the previous comment indicates, they are missing requirements.

The smaller cargo holds are missing their placement requirements

"New A: New storages have no more adjacency requirements because I've included them on their placement grid."
You just made everything bigger. Nothing else can go on that 'placement grid'. That 'small' 2x1 cargo hold takes up 2x3 while looking like 2x1. There definitely isn't any way to place anything like you have in the screen shots.

"Small cargo compartment - 9 stacks."
How big is it, though?
"Cargo holds - 18 stacks."
Okay, so double the capacity. But how big?
"2x2 cargo hold - 24 stacks."
Okay, so 6 stacks per cell, cool.
"3x3 cargo hold - 45 stacks."
Somehow now only 5 stacks per cell?
"Massive cargo hold - 75 stacks."
Okay, but how big is it?

Also, why is this in its own tab instead of storage tab? It sounds like there's some discrepancy on size of refrigerated cargo hold, too. *And* there's some issue where they make a room less clean?

Big oof. somebody ping me if these issues get fixed. I guess for now I'll just up the stack size of things through those kinds of mods.

is it possible to build cargo holds without rquiring gravship substructure? tried to build any of them outside and it didn't allow me

hey, great job, I can't imagine gravships without your mod now. Btw I'm not finding the old bulk ones as unballanced - in fact I use them exclusively, for me the counterbalance is the time it takes to put stuff in to them, even if they are so compact for the space you get.

I hope they can be placed side by side.

@Hemito Please look through Dub's Analyzer whenever trying to find sources of lag, and share screenshots when finding a mod there. Rendering is a lot faster here than the vanilla rendering for the same items on the floor. It just ends up getting displayed as coming from the building instead of individual items

It was great to combine stacks inside containers and it seems they are still rendering, it lags like crazy)

For some reason the 1x2 Refridgerated Cargo Hold is actually a 3x2. I changed the capacity to compensate, but I think this is the real issue with the adjacency that people like @Omgwtfbears have been having.

The cargo holds are pretty dope but is there a reason they are in a separate category instead of storage?

is it possible to place them on regular ground without editing files?

This seems to have a lot of issues. Some of the cargo holds say they can only be built on a gravship, but can actually be built anywhere. The refrigerated hold also has two power requirements defined which causes issues.

I am having an odd thing happening with regards to cleanliness and the "Steel 2x2 Cargo Hold (Bulk)" storage units. I'm not sure why, but they seem to be making the room they're in less clean . They're not hitting the Beauty value (which would make perfect sense to me), but the Cleanliness one.

I originally had them in my rec/dining room, simply because that was the only free floor space I had at the time. I noticed that the floor was being marked as dirty even when there were no visible dirt/filth bits on the floor; I even moused over the tiles to confirm that that was the case. I tried covering the room's floors with sterile tiles, and, even with that, the value on a visibly clean floor was still around -2.5.

Once I had the room, I moved the cargo holds to my workshop, and the cleanliness value of the old room went up to +0.6 (sterile) after I had done so.

pics here:
https://imgur.com/a/qtX7yMm

Hey, big fan with a quick question. Are perishables in a regular cargo hold effected by the temperature of the room the hold is in? Like, is meat in a regular cargo hold frozen if the hold is in a room below freezing?

good

@Stellar forester That was rimworld's unity update to 2022.3 breaking compatibility with rimpy's by now badly outdated conversion settings. Rimsort and todds are the maintained alternatives without this issue

@bradson i figured it out, it was not only this mod. It was many and the problem was that i converted the textures of all mods so that the game load faster but there was a rimworld update that broke that as far as i know

This mod is amazing but I would really love temperature controls for the fridge (unless I am missing something?)

@Stellar forester Clear the mod folder and redownload. That's not any kinda normal state for the mod

all my Storage from this mod has a big red question mark on it and not really a texture just the material collour as a squareunderneath the ?.

Have anyone figured out how to fix refridgirator cargo holds? I don't think they are behaving as intended, even if they indeed refrigerate the contents.

Very nice. I wonder if anyone's made an equivilant for under-floor batteries.

does anyone else get a lot of lag when they select the large cargo hold with a lot of items inside?

I created a Korean translation with the help of AI :D
Just paste it into your mod file!
Path: Steam\steamapps\workshop\content\294100\3536708812

https://drive.google.com/file/d/14RehTWCexZqGLVHdrAwvec_ZtjK1zTQq/view?usp=sharing

I seem to have found an issue with the refridgirator cargo holds. They seem to be coded to have two different power needs at the same time. It displays one saying 300 W but under it it says 200 W. Also the structure is constantly showing the "out of power" icon on them.
They still work but the game seems very confused about them

i don't know if this has been asked yet, but i would love to be able to paint the Cargo holds to better help myself find stuff by color coding the holds.

Would it be possible to make it compatible with SOS2 ships?

it would be great if you could place the big ones anywhere and not just on gravships or make a non gravship version like the comment bellow is asking

he man can it be possible to give us non gravship versions?

Can it be placed under a building like the mod "Automatic Hydroponics"?

Is it possible to modify the blocking range of the 3x3 cargo hold? It seems that this doesn’t align with the range of other cargo hold sizes.

Last update for now, things are good again and it seems i have pinpointed the exact source of the problem. It appears that specifically hauling textiles or kibble into a 2x2 bulk cargo hold was what broke all the hauling schedules, i don't know if the new 2x2 has a similar problem. I now use some massives, some 2x2s, some 2x1s and some 1x1s along with a few other storage structures from reel's expanded storage. Thanks again for the mod.

@AlexelA That's deep storage moving all storage buildings into their category

Really like your mod! Report an issue, after the latest update, I found that a empty sub menu category of "cargo hold" has been added to the building menu, as all building options are already classified under the "storage" sub menu. I have installed "Neat Storage" and "LWM Deep Storage". I'm not sure if it's due to conflicts with them.

the cargo holds count as a building right? so they slow down pawns walking over it? or are they avoided altogether?