Fix Xinput Controller Using XInputPlus (DInput remapping)

Use your Xinput Controller in Dead or Alive 5: Last Round like it's meant to be. Fix incorect mappings triggers, right sticks and buttons.

Introduction

Dead or Alive 5: Last Around (DOA5LR in short) have broken support for XInput controllers and I lost hope in developers from fixing it. To begin with DOA5LR doesn't really use XInput but instead uses DInput for controller support so the likes of X360CE won't work.

For every XInput controller connected in your PC, there's a counterpart DInput equivalent for backwards compatability (and that's where DOA5LR read input from controller). But DOA5LR uses a fixed mapping from DInput and they didn't provide a utility to remap it. From what I have tested, the fix mapping is made for the Official XBOX360 PC Controller (I tested the wired one) and it works well.

But If I use my Logitech F510 in XInput mode (this controller has switchable XInput/DInput mode), the mapping is broken - BACK/START do an attack, TRIGGERS don't execute anything and cannot be used. LS/RS is the BACK/START. I switched the F510 to dedicated DInput mode but still broken, the face buttons are jumbled like X is the A/Confirm button and A is the B/Cancel button and that feels weird.

So this guide aims is to fix XInput only/mode controllers and fix the DInput mapping to what DOA5LR expects and make it work like actually playing with a controller (keyboard mapping solution doesn't allow you to customize attack buttons ingame and needs the controller to be disconnected when launching the game).

What you need:

• XInputPlus application
  
• XInput Controller (switch to XInput if it has DInput/XInput mode)
  
• Dead or Alive 5: Last Round installed (ofcourse)

Let's begin~

Download XinputPlus application by 0dd14 lab

Visit the homepage of XInputPlus for the dowload > XinputPlus Download[sites.google.com]. The page is in Japanese (use Google Translate if you want read), but to download you only need to click the big graphical Download button to get the latest version (as of writing it is Ver4.14.2).

Go extract the contents of the zip file (e.g. XInputPlus Ver4.14.2.zip) to any folder were you want the program to execute (not in the game folder, give its own folder).

Setting up configurations

Connect your XInput controller to your PC. Then launch XInputPlus.exe from where you extracted XInputPlus zip file.

Click the Select button besides the Target Program textbox. Now browse to DOA5LR install folder (e.g. <Steam>\SteamApps\common\Dead or Alive 5 Last Round) and select game.exe


Go to DirectInput tab and check the Enable DirectInput Output. This is what I set for my F510, possible configuration for your controller might vary.

• Right Stick > Z Axis/Z Rot
  
• Guide > Button 13 (guide doesn't work for me / to avoid conflict only)

Then click the Customize button:

• Left Trigger > Button7
  
• Right Trigger > Button8
  
• BACK > Button 9
  
• START > Button 10
  
• LS Button > Button 11
  
• RS Button > Button 12

And click OK. And then press Apply at the bottom to install the DLL and INI files into your game. You can close the program now.

But wait we are not done yet, as of now the GUI configurator seems to be bugged for me. The BACK/START/LS/RS button settings we applied doesn't get saved in the INI file properly. Until this is fixed, we gonna edit the INI file in the game folder named XInputPlus.ini using your prefered text editor.


Under the [X2DInput] manually type the mappings there. Mine I just have to search for the corresponding TRIGGERS/BACK/START/LS/RS lines and replaced with

Left Trigger=Button7
Right Trigger=Button8
BACK=Button9
START=Button10
LSB=Button11
RSB=Button12

And saved it.

Final XinputPlus.ini For Reference

For reference here's what my final XinputPlus.ini file looks like:

[General]
iniFileVersion=4140
[KeyAssign]
LS=LS
RS=RS
LT=LT
RT=RT
DPAD_UP=DPAD_UP
DPAD_DOWN=DPAD_DOWN
DPAD_LEFT=DPAD_LEFT
DPAD_RIGHT=DPAD_RIGHT
A=A
B=B
X=X
Y=Y
LB=LB
RB=RB
LSB=LSB
RSB=RSB
BACK=BACK
START=START
GUIDE=GUIDE
ThresholdA2D=40
DPAD4Direction=False
[LeftStick]
DeadZone=0
Saturation=32767
Linearity=1
Response=32767
RectCorrection=0
Scale=1
CenterOffsetX=0
CenterOffsetY=0
InvertX=False
InvertY=False
DisableX=False
DisableY=False
[RightStick]
DeadZone=0
Saturation=32767
Linearity=1
Response=32767
RectCorrection=0
Scale=1
CenterOffsetX=0
CenterOffsetY=0
InvertX=False
InvertY=False
DisableX=False
DisableY=False
[LeftTrigger]
DeadZone=0
Saturation=255
Linearity=1
Response=255
[RightTrigger]
DeadZone=0
Saturation=255
Linearity=1
Response=255
[RapidFire]
Buttons=
Speed=1
ToggleONOFF=True
ONOFF_Button=START|GUIDE
MaskToggleONOFF=True
EnableAtStart=True
[Hold]
Buttons=
ToggleONOFF=True
ONOFF_Button=BACK|GUIDE
MaskToggleONOFF=True
EnableAtStart=True
[Advance]
ForcePause=False
Pause_Button=START|BACK
Reset=True
Reset_Button=LB|RB|GUIDE
[Vibration]
LeftMotor_Strength=1
RightMotor_Strength=1
ToggleONOFF=False
ONOFF_Button=RSB|GUIDE
MaskToggleONOFF=True
EnableAtStart=True
[ProxyDll]
FileName=
FileNamex64=
[Misc]
UseInitBeep=True
SoundVolume=0.75
FileVersion=x86
UseXInput1_3=True
UseXInput1_1=False
UseXInput1_2=False
UseXInput1_4=False
UseXInput9_1_0=False
[ControllerNumber]
Controller1=1
Controller2=2
Controller3=3
Controller4=4
[X2DInput]
EnableX2Dinput=True
LS_X=X_Axis
LS_Y=Y_Axis
RS_X=Z_Axis
RS_Y=Z_Rot
LT=Button7
RT=Button8
DPAD_UP=POV_UP
DPAD_RIGHT=POV_RIGHT
DPAD_DOWN=POV_DOWN
DPAD_LEFT=POV_LEFT
A=Button1
B=Button2
X=Button3
Y=Button4
LB=Button5
RB=Button6
BACK=Button9
START=Button10
LSB=Button11
RSB=Button12
GUIDE=Button13
SHIFT+LS_X=X_Axis
SHIFT+LS_Y=Y_Axis
SHIFT+RS_X=Z_Axis
SHIFT+RS_Y=Z_Rot
SHIFT+LT=Z_Axis
SHIFT+RT=Z_Rot
SHIFT+DPAD_UP=POV_UP
SHIFT+DPAD_RIGHT=POV_RIGHT
SHIFT+DPAD_DOWN=POV_DOWN
SHIFT+DPAD_LEFT=POV_LEFT
SHIFT+A=Button18
SHIFT+B=Button19
SHIFT+X=Button20
SHIFT+Y=Button21
SHIFT+LB=Button22
SHIFT+RB=Button23
SHIFT+BACK=Button24
SHIFT+START=Button25
SHIFT+LSB=Button26
SHIFT+RSB=Button27
SHIFT+GUIDE=Button30
SHIFT=
DisableUnmappedObject=False
ForceFeedBack=True
FFB_ConstantForce=0.25
FFB_RampForce=0.25
FFB_PeriodicForce=1
DeviceID1=
DeviceID2=
DeviceID3=
DeviceID4=

Have Fun

And that's it. Now go launch the game, you should here a chime/beep if you launch the game. Go check all your buttons/triggers/joystick and/or create your custom mapping ingame.



If you ever wanted to remove XinputPlus from your DOA5LR, just run XinputPlus program and select the game.exe again and then click Disable button.

Have fun. :)

[Jamarie]

i have a xbox one controller and the LT AND RT does not work

[ttv/charsles]

for those who still having trouble with this, just download this file and put on DOA5 folder, it works with Autolink too.

https://www.media

fire.com/file/7loehoctugp3aa9/Xbox_one%25E6%2589%258B%25E6%258A%258A%25E8%25A3%259C%25E4%25B8%2581.rar/file

just match the link together because steam do not allow links here. hope it works for u guys :)

[Zputnik7]

when I click the apply button I got the "The DLL file which is not Xinput Plus exists in the folder of an Target program. DLL of Xinput Plus is inapplicable" message, what should I do?

[Darushii]

Still the same for me, x360ce work for remap RT LT but maping still a mess Y is A only B start and back are ok, the worst problem left analog camera!

[Crøst Dærgön]

That didn't work. In fact now I can't interact with the game at all in Xinput mode.

[New Member]

Do you have discordapp? Can you teach me how to install this tool without removing my installed mods?

[Lexy]

Does anyone have the xinput plus file? the site somehow stop uploading it

[Raden]

Or just get a freaking Xbox 360 controller (you know, a real controller) and be done with it all.

[^Bo₭3Яꝋꞥ^]

alguna forma de ponerle autolink y que funcione esto? segun e comprobado el archivo Dinput8.dll del autolink anula esto

[SizzMaria]

I just wanted to use my F300 and this solved it. Thank you for saving all the money that I spent on this game!